Why Are Black Specks Coming Out Of Iron? (Fixed)

Using an iron should be straightforward.

It should not lead to unwanted debris and/or marks on your clothing. Unfortunately, this might happen when the iron starts breaking down and/or not running properly when you let it warm up.

One problem can involve black specks coming out of the iron.

If black specks are coming out of the iron, this is due to a damaged or dirty soleplate. It’s recommended to clean the soleplate using a mixture of vinegar and water. In some cases, minerals can build up on the plate. Use the vinegar mixture and then let the iron steam for a few minutes before rinsing it.

Your focus has to go to the soleplate when black specks are coming out of the iron. After all, this is where the black specks are.

For those in this predicament, it’s important to find out why there are black specks in the iron and what to do about removing them. This guide will help make that process easier for you.


PurSteam Steam Iron for Clothes 1700W with Self-Cleaning...
  • Rapid Heating – Our Professional Steam Iron 1700W heats in just 30 seconds! Stainless Steel Soleplate – True position...
  • 3-Way Auto Shutoff – Our iron for clothes automatically shuts off and alerts you when the iron is left unmoved:...
  • Preset Modes – Choose from preset fabric modes on this clothes iron: low (synthetics, viscose, polyester), medium (silk,...

Last update on 2024-07-13 / Affiliate links / Images from Amazon Product Advertising API

How To Remove Black Specks Coming Out Of Iron

1. Inspect The Soleplate

Start with the iron’s soleplate.

The soleplate is where these black specks are going to appear. Your goal is to see what the root cause of the issue is as that is the only way to address it.

Is the soleplate dirty? This might be the leading cause of black specks coming out of the iron in the first place.

Is the soleplate damaged? This can happen when the iron has started to show signs of aging.

In some cases, there will be minerals that build up in the soleplate. This is going to have to be removed with a cleaning solution that is made at home.

2. Mix Vinegar + Water

You will need to make a robust cleaning solution at home.

What will it include?

For the most part, you will want to have a nice mixture of vinegar and water. You are going to do this by maintaining a 50:50 ratio.

This means one cup of vinegar + one cup of water. You can maintain the same ratio and use less of each if you don’t need that much for the iron’s soleplate.

When you pour the ingredients into a separate bowl or cup, you are going to want to mix them properly.

3. Apply The Mixture To The Soleplate And Scrub

You will now want to start applying the mixture to the soleplate.

You can do this with a clean cloth.

The goal is to make sure the entire soleplate is covered as that is the only way it will loosen the debris that is there. If not, you are going to continue having to deal with unwanted black specks that are unappealing and will get onto your clothing.

Focus on this and make sure to apply the mixture evenly.

Next, you are going to take the clean cloth and begin to scrub as fast as you can. This is how you are going to make sure the soleplate is as clean as it needs to be.

It might take a few minutes for the mixture to settle and that’s fine.

Let it soak in and then use the scrub.

4. Let The Iron Steam For 2-3 Minutes And Then Rinse It

It is also recommended to let the iron steam for at least 2-3 minutes.

This is useful when there are minerals in the soleplate that are getting in the way. They are going to be hardened, which means you will want to let the iron’s steam take care of them once the mixture has been applied.

This is a lot better than rinsing it immediately.

After you have scrubbed the soleplate, you will want to rinse it. Remember, you will do this while keeping the iron disconnected.

When you are letting it steam, you do not want to touch the iron. This will be unsafe.

Final Thoughts

These are the best options for those who want to get rid of the black specks coming out of the iron.

To get rid of black specks coming out of the iron, start by inspecting the soleplate and then applying a mixture of vinegar plus water. Let the mixture settle on the soleplate for 2-3 minutes and then scrub. It’s also wise to let the iron steam for 2-3 minutes before disconnecting it.

This is how you are going to remove black specks on the iron the right way.

Do not rush this process and continue to inspect how the iron is doing when you are putting in the time to keep it clean.

Those black specks will be gone as soon as you want with the help of this robust mixture.

Read More On Irons:

  1. Is Ironing Granite Wise?
  2. Should You Start Ironing A Book Dust Jacket?
  3. Should You Start Ironing A Non-Iron Shirt?
  4. Should You Iron The Patch On Nylon?