Can’t Get Dresser Drawer Back In! (Solved)

When it’s time to set the drawers into place, it’s not always as easy as it should be.

There might be something snagging on the drawer or not letting it line up the way you want it to.

This is when it becomes important to think about your options and figure out why you can’t get the dresser drawer back in.

If you can’t get the dresser drawer back in, start by lining up the drawer with the slide reel, next press the flange on the side of the dresser, and then slide the drawer into place. Once done, make sure it does not fall when you pull it out.

For the most part, people don’t press the flange on the side of the drawer, which causes it to not go in.

The flange is designed as a locking mechanism to hold the drawer into place when it is in the slide reel.

This guide is going to show you more on what to do as you look to get the dresser drawer back in.

Best Bedroom Mirror (EDITOR’S CHOICE)

QiMH Vertical 47x22 Inch Wall Mounted LED Lighted Vanity...
  • PAIR MORE DECORATION - The mirror is designed in an aluminum frame that can be easily matched with many decorative figures....
  • 3 COLORS DIMMABLE LIGHT - Three colors of warm light, cool light and natural light with adjustable brightness intensity to...
  • ENERGY SAVING - LED light source creates bright, energy-efficient illumination(output 25W), Their long-lasting LED provides a...

Last update on 2024-07-12 / Affiliate links / Images from Amazon Product Advertising API

Tips On How To Get Dresser Drawer Back In

1. Line Up Drawer With The Slide Reel

The main issue people are going to have has to do with how they line up the dresser drawer with the slide reel.

There are two reels on the side, which are going to hold the dresser drawer once you push it into place.

If you don’t take the time to line up both sides equally, it is going to get stuck and will not move further.

This is why you will want to first line up one side and then the other to make sure both are ready to go before you push the dresser drawer further.

You will need to be careful during this step to make sure it does go in as you want it to.

2. Push In On The Flange On The Drawer

Now, you are going to look for the flange on the side of the dresser drawer.

This is a little tab that is going to be in the middle of the dresser’s side reel and it is the first detail you are going to want to look for.

The idea is to press this tab.

The tab is going to act as a lock when you slide it into place. Without pushing at the flange, you are not going to activate this locking mechanism.

You do not want to let go of the tab until it is in place within the dresser. Take your time with this step and make sure you do use the locking mechanism as it is supposed to be used.

3. Slide The Drawer Into Place

You will want to make sure to gently push the drawer into place.

A lot of people will aim to quickly rush the process and that will make it much harder to get it to go through.

In general, your goal has to be to slide the drawer into place just the way you have lined it up. This is how it is going to go into the slide reel the right way.

You will notice it is going to go in smoothly.

If it is not, continue to push on the flange and it will slide further.

4. Make Sure The Drawer Is Secure

Now, you are going to want to test the dresser drawer.

This means pulling at the drawer to see whether or not it comes out.

You don’t want a situation where the dresser drawer goes in but the locking mechanism doesn’t activate. This can happen when the flange on the side gets stuck and stops working properly.

You will want to test this by pulling at the dresser drawer to see if it comes out. If it keeps coming and then falls off the slide reel, this is a problem and you are going to want to tighten the flange.

Final Thoughts

I can’t get the dresser drawer back in!

If you can’t get the dresser drawer back in, the best strategy is to line up the drawer with the slide reel in the dresser, press the flange on the side of the drawer, and then push it in until the drawer locks into place.

You are going to have to look at how you are lining up the dresser drawer during this process.

It is the only way to make sure the dresser drawer does not fall out as soon as you push the flange in. This is a multi-step process, so you are going to want to pay attention to how the dresser drawer sits in the dresser.

Read More On Drawers:

  1. Steps To Take Out Drawer From Desk
  2. Steps To Take Out Drawer With No Lever
  3. How To Manage A Sagging Drawer