DIY Carpenter Bee Trap To Remove Bees Quickly

Bees can often get in the way and are fascinating animals that can be quite resourceful while they are going about their day.

This means you are also going to have to think like a bee and better understand what is required to trap a bee. Otherwise, you are not going to find it easy to handle them and might even get stung.

It’s essential to be patient with a process such as this and make sure you are aware of what the process is going to entail.

We have made your life easier with the best DIY carpenter bee trap ideas to make sure things move ahead as you want them to.

Best DIY Carpenter Bee Trap Idea

What You Will Need To Make The Trap

  • 1/2″ Wood Bit
  • 1/2″ Metal Bit
  • 7/8″ Wood Bit
  • Measuring Tape
  • Square
  • Screw Driver
  • Drill
  • Saw
  • Hammer
  • Wood Screws
  • Mason Jar
  • Screw Eye
  • 4×4 Post
  • Punch
  • Pencil

Steps To Make The Carpenter Bee Trap

1. Prepare The 4×4 Post

You are going to start with the 4×4 post that you have managed to pick up. The goal here is to ensure the 4×4 post is prepared to ensure any cutting that is going to be done is precise.

How are you going to do this?

We would recommend creating a 45-degree angle. This is going to be simple, effective, and is going to ensure the cut is in line with what is required for the bee trap.

2. Cut The Post

You are now going to take the time to cut the post that has been prepped.

This has to be precise and it’s best to use a sharpened saw to do this. What type of saw should you be using?

This is up to you.

We would recommend using a circular saw if you have one for more precision.

It’s important to note that you are going to want to now have wood that is going to be easy to personalize and put holes into as required. It will be around 4×7 (inches).

3. Drill Hole Into The Wood

You are going to begin working on the wood now.

To do this, you are going to find the center point of the wood. You will want to use a measuring tape for this to get it right.

Once you do this, you are going to use the 7/8″ bit and begin drilling into the wood. It should be 3-4 inches deep.

4. Drill At A 45-Degree Angle

You are going to want to take the time to begin working on the wood block and ensure it is drilled into as required.

This includes preparing entry holes.

These holes are going to be on the sides. The holes should be at least two inches from the base. To do this, you are going to use a 1/2″ bit and make sure it is drilled at an angle.

Begin drilling and make sure the holes are straight.

5. Prepare The Jar

You are now going to begin working on the jar.

To do this, you are going to remove the lid and set it up on a metal plate. You are going to want to mark the center point of the lid. Make sure to measure this to get it right.

You are then going to make the halfway point between the edge and that center point. You can use the punch to create a hole where that mark is. You are also going to want to take out the 1/2″ metal bit and drill into the hole that is in the middle.

At this point, you can put the lid onto the trap. This is going to go into the ring at the bottom of the trap. You can line up the holes by doing this and it will be into place as required.

You can now hang the carpenter bee trap as required.

How To Attract The Bees To The Trap

Let’s assume the bee trap has been hung up.

How are you going to get it to work as required?

The premise here is to make sure the bees are going into the holes that have been made as that is how you are going to get the results you are aiming for. We would take the time to use pheromones or smells that are going to attract them.

This can be anything sweet and also make sure the trap is higher up as they are going to prefer this.

This is why we recommend hanging it.

The goal of the trap is to make sure the bee gets into it and wants to lay an egg there. As soon as it is in the trap, it is not going to be able to get out.

This is what you are going to want to be aiming for to see good results.