Bedroom

It’s not a good experience to be sleeping and then feel ants crawling into the bed.

This is going to make it impossible to sleep and you are going to want to remove the ants from your bedroom as soon as possible. You will be left wondering, why are the ants crawling on me while I sleep?

Ants can start crawling into a bed when nearby gaps are letting them in. It’s also possible there is debris (i.e. food) in the bedroom that’s attracting them. It’s recommended to clean the bedroom, wash everything, and use insecticides to remove the ants.

If you are saying “There are ants in my bed biting me!” then it’s an urgent matter. You will want to address this as soon as possible.

Removing ants from your bedroom can be done with the right strategy. It’s all about taking the time to understand what’s happening in the bedroom and where the ants are coming from.

This article is going to take a look at how to remove ants from a bedroom the right way.

Best Ant Remover For Bedroom (EDITOR’S CHOICE)

No products found.

How To Remove Ants In A Bedroom

1. Remove Everything From The Bedroom

If there are ants on a pillow or in the bed, they are likely to spread throughout the bedroom. It is not just going to be reserved for your bed.

This is why it’s time to remove everything from the bedroom.

This is going to include the curtains, bedsheets, mattress, and anything else that is sitting in the bedroom at the time of the ants being there. They are likely inside those items, so you are going to want to wash or clean them before putting them back into the bedroom.

This is the only way to be sure there are no ants in the bedroom when you are done.

Removing the items from the room is a good starting point. It will also let you take a proper look to see where the ants are coming from in the bedroom and what can be done about them.

2. Wash The Sheets And Curtains

You will want to wash the sheets.

This is a must because you are well aware the ants were crawling into the bed. This means they were spread throughout the bed and got into the sheets.

You will want to make sure to wash the sheets in the washing machine and ensure it is done with hot water.

You will also want to take the time to wash the curtains and/or anything else that might have been covered in ants.

The reason to do this is to make sure you are not removing the ants from the bedroom and then bringing them back in via the sheets or curtains.

3. Clean The Bedroom

You will also want to take the time to clean the bedroom.

This can be done with the help of a vacuum cleaner.

The vacuum cleaner is going to make it easier to get rid of the ants and ensure they are out of the bedroom as soon as possible.

You might also want to look at using other cleaners as a way to remove food debris that is in the room. This is a must because if there is food in the room, the ants are still going to want to come in.

4. Use Insecticides

You will now want to take a look at what can be done to remove the ants from the bedroom.

To get rid of ants in a bedroom, you will want to use ant baits or insecticides.

This comes down to what is going to work well for you. Using insecticides is a good idea because it will ensure you are removing the ants as safely as possible and they are not going to be lingering around afterward.

This is effective, proven, and is going to help target all of the ants in the bedroom.

Final Thoughts

Why are ants crawling on me while I sleep?

Ants will start crawling into a bed when there’s a nearby gap allowing them to come in. They are likely attracted to the scent of food particles in the bedroom. It’s recommended to remove everything from the room and wash it along with using insecticides to get rid of the ants.

This is the only way to make sure you are not dealing with an ongoing ant infestation in the bedroom without a solution in sight.

Ants are pesky but you will want to be creative with your solution. This is how you are going to make sure the ants are out of the way as soon as possible.

Read More On Bedrooms:

1. How To Improve Bedroom With No Windows
2. Why You Should Lock Your Bedroom Door
3. Why You Should Put A Smoke Detector In A Bedroom
4. Tips To Put A Hanging Chair In A Bedroom

If there’s a bedroom without windows, it becomes important to adjust to this reality as soon as you can.

If adjustments are not made, it can make the bathroom difficult to sleep in and it will also make it stuffy. This is why it’s essential to find out more about what to do if you are left saying, “My bedroom has no windows!”

If a bedroom has no windows, it’s recommended to open the windows in a nearby room and leave the bedroom door open. Next, remove all clutter in the bedroom and use a lighter color for all of its fixtures and walls.

This is the best way to create open space in the bedroom and make it breathable. It is always a good idea to ensure there’s enough airflow in the bedroom when there’s no window to open.

This article is going to show you a few tips on what to do if a bedroom has no windows.

Best Purifier For Bedroom (EDITOR’S CHOICE)

No products found.

Tips For Bedrooms With No Windows

1. Open The Windows In The Nearest Rooms

If a room has no windows, it’s essential to think about the airflow.

It’s essential for there to be enough airflow to ensure the windows are stable. This is one of the biggest concerns a person is going to have in a situation such as this.

You need to make sure it does not get stuffy in the bedroom without windows.

To do this, you are going to look for the nearest window to the bedroom. This is the window you are going to open at various times during the day. The reason is to get the air flowing throughout the space including the bedroom.

If possible, you will want to look for all windows that are in that specific direction.

The reason for doing this is to make sure you can open the windows and get the breeze flowing as required. A lot of people don’t do this and that leads to issues with how the air flows.

2. Leave The Door Open For The Breeze

You will now want to maximize the airflow that you have created from opening nearby windows.

To do this, you are going to leave the door open for the breeze.

This is essential because leaving the door open for the breeze is going to ensure it spreads throughout the bedroom. This is the best way to make sure it’s breathable in the bedroom and you feel comfortable with what’s going on.

A lot of people don’t do this and that makes it difficult to keep things as breathable as they need to be.

If you leave the door open, you are going to enjoy the experience and how it turns out.

3. Remove The Clutter

You will want to remove the clutter in the bedroom.

You may be making it even harder to remain in the bedroom without windows due to the clutter.

This clutter is not only bad because it’s going to hamper the air in the room but it is also going to make it smell worse. Don’t let this happen and make sure you are alert when it comes to making adjustments.

You should always look to keep this part of the property as clean as possible. This is a simple change that is going to make the room more liveable.

4. Use Lighter Colors

What colors are being used in the bedroom?

You have to ensure the right colors are being used in the bedroom.

If you use darker colors, this is not going to be good for how the bedroom is and how it looks. It is going to look boxed in and that is the last thing you are going to want when it comes to getting more value from the bedroom.

It’s essential to take a step back and make sure you are focused on using lighter colors throughout the bedroom.

This is what will help with the windowless bedroom.

Final Thoughts

What can you do with a bedroom that has no windows?

To maximize a bedroom that has no windows is to open the nearest windows and leave the bedroom door open. This will increase airflow throughout the space. Next, remove all clutter in the bedroom and then ensure you are using lighter colors to open up visual space.

This is how you are going to get more out of the windowless bedroom and it’s going to be as comfortable as you want it to be.

It’s difficult to maximize a space such as this because most bedrooms will have a window in them.

If yours does not, it is best to take the tips that are listed here and implement them into what you are doing and how you are doing it.

Read More On Bedrooms:

1. Reasons To Lock Your Bedroom Door
2. Reasons To Put A Smoke Detector In A Bedroom
3. How To Put A Hanging Chair In A Bedroom

The one thing people are going to want to think about when using an electric blanket is to figure out how it needs to be set up.

You will naturally assume the electric blanket has to be used a specific way but that is not always true.

The one question you are going to have is, do you use an electric blanket over or under?

The electric blanket should be placed over a blanket. Do not place it under the blanket as this is unsafe, ineffective, and is not the way the blanket is supposed to be used.

Electric blankets offer a wide array of advantages and should be an option you think about using for your setup.

However, it’s important to know how to use an electric blanket along with how ti place it when you are resting on a bed.

Here are a few tips on how to use an electric blanket.

Best Portable Washing Machine (EDITOR’S CHOICE)

No products found.

How To Use An Electric Blanket The Right Way

1. Keep It Over The Blanket

Let’s begin with the core question in this article – do you put the electric blanket over or under a blanket?

You will always want to put the electric blanket over a blanket. It should not be making contact with your body as that is not how it should be used.

It is best to make sure it is put over a blanket as that is going to keep you well-heated and it is not going to be dangerous.

If you ever take the time to touch the electric blanket, you are going to notice it get warm. This is not going to feel good on the skin if that is what you end up wrapping yourself with when lying down on a bed.

The best option is to make sure you are putting the electric blanket over another blanket and then using it.

This will keep you warm and safe.

2. Dangerous To Place Under The Blanket

This is one of the most important details to remember.

Using an electric blanket is useless if you are not staying safe while resting. You will always want to account for this.

There is nothing worse than lying down and realizing the blanket feels odd.

Since you are going to be resting for long periods, you do want to stay safe.

The best option is to make sure there is another layer between you and the electric blanket. This is a natural rule of thumb for a product such as this and it is one thing you are going to want to follow every step of the way.

3. Know The Settings First

If you are using the electric blanket for the first time, you will want to acquire as much information about it as possible.

Getting to know more about the settings is a plus point.

This will let you figure out how to use the electric blanket, where it needs to go, and how warm it can get when you are using it.

Do not compromise on this as that is how you are going to end up seeing subpar results.

The best option is to be aware of the settings by going through the user manual and testing it a few times.

4. Keep Tabs On The Temperature

Since this is going to be heating your body, you will want to make sure to keep tabs on the temperature of the blanket.

The electric blanket tends to do well when you put it on top of a blanket.

This is when you can save yourself from overheating that happens as soon as the blanket is powered on.

In general, you are going to have full control of the settings, so you are not going to need to concern yourself with overheating.

However, it is still good to keep tabs on the temperature as you are using the heating blanket.

Final Thoughts

Do you put the electric blanket over or under?

An electric blanket should always go over a blanket. This helps protect the body, feels better, and ensures it does not compromise a person’s sleep when they are resting on a bed.

When you are thinking about using an electric blanket, you will want to consider these details during the process.

It is the only way you are going to like using the electric blanket and making it a part of your daily routine.

This is a great option to have when it is cold in the house.

Just wrapping yourself up with a blanket and this option is one thing that will keep you toasty during the night.

Read More On Bedrooms:

1. Reasons Electric Blanket Won’t Work After Being Washed
2. Is Electric Blanket Better Than A Weighted Blanket?
3. How To Keep Fuzzy Blanket From Shedding

There is nothing more frustrating than putting a mattress on the floor and realizing it is not lasting as long as you want it to.

Most people are going to assume this is due to the location of the mattress but it has more to do with how you protect it.

There is certain exposure that takes place when the mattress is on the floor and you have to be careful about how you manage it.

This includes learning how to remove mattress on floor mold.

To remove mattress on floor mold, start by propping the mattress against a wall for a few hours, wipe the surface, and make sure to use a strong cleaning agent to remove the mold already there.

The reason this happens has to do with moisture getting under there. This can do quite a bit of damage if you are not taking the time to air out the mattress on the floor.

Here is a detailed assessment of what you will need to do with mattress on floor mold and how to counteract it the right way.

Best Mattress Pad (EDITOR’S CHOICE)

No products found.

Tips On How To Remove Mattress On Floor Mold

1. Place The Mattress Upright Against A Wall

The main concern has to do with what is happening underneath the mattress.

When there is a mattress on the floor, it’s common for moisture to develop. This is due to where it is located and how it collects moisture from the environment it is in. Plus, you are going to be resting on it and this worsens the situation.

When a mattress is elevated, it airs out naturally.

This is not going to happen when the mattress is flush against the floor.

You will want to take the time to make sure to do this yourself. As a result, the best option is to put the mattress in an upright position against the wall.

2. Let It Air Out For A Few Hours

While the mattress is against the wall, you are going to want to let it air out.

If possible, you should be doing this every day to make sure it continues to air out when you are not using it.

While this might not always be possible, you should be looking to set a schedule for when the mattress is aired out.

This is the only way to not end up in a cycle where you continue to see mold under the mattress on the floor.

This is unsafe and making sure you air out the mattress is a must.

3. Use Strong Cleaning Agent To Remove The Existing Mold

What are you going to do about the mold that is under the mattress on the floor already?

You will need to get rid of it.

The best option to do this is going to involve a strong cleaning agent. You will want to apply this cleaner on the surface. It can be something like a strong mold remover to target the mold under the mattress.

This might take a bit of time to apply but it is worth it.

You don’t want a situation where the mold continues to spread. This is a health risk and it is not going to be good for the floor either.

4. Wipe The Surface

When you have taken the time to apply the commercial cleaner, it is time to think about getting rid of it safely.

The best option is to wipe the surface using a clean cloth.

You will want to make sure it has the time to settle and loosen the mold already in place. The cloth is going to make sure you can scrub it out and get rid of it for good.

It is best to take your time during this step and make sure you scrub vigorously. this is how you are going to make sure the mold is gone.

Final Thoughts

These are the details you will need to go over when removing mattress on floor mold.

To remove mattress on floor mold, start by standing the mattress upright against a nearby wall. Next, let it air out for a few hours and then apply a strong mold remover on the floor to get rid of the mold.

This is a must when you are hoping to keep the mold away from a mattress.

The moisture is going to get worse if you don’t take the time to air out the mattress. It should become a routine to do this or you are going to regret it later.

Here’s more on Beds:

1. Is Mattress Pad Safe Over A Memory Foam Topper?
2. Steps To Relocate A Double Mattress In A Car
3. Can My Memory Foam Mattress Stay On Its Side For Long Hours?
4. What Is Put Under A Mattress On The Floor?

Setting up the drawer pulls can be essential to how it looks and functions.

If you don’t take the time to look into these details, you are going to end up with a malfunctioning or ineffective drawer that is never used.

As a result, you will want to compare drawer pulls in middle or top locations.

Drawer pulls in the middle are more balanced, easier to handle, and tend to distribute the weight better than drawer pulls at the top. It’s often recommended to go with drawer pulls at the top only if it’s a personal preference.

If you are looking at nothing more than efficiency, it’s best to stick to a drawer pull in the middle.

It will work well and is going to be easy to set up too.

Here is a look at how drawer pulls in the middle compare to those on top.

Best Bedroom Mirror (EDITOR’S CHOICE)

No products found.

Comparing Drawer Pulls In The Middle Vs. The Top

1. Aesthetics

Let’s begin with the basics.

You are going to notice the style of these drawer pulls before anything else. This includes where the drawer pulls are set up and how they look when comparing them to the rest of the setup.

This is why you will want to take a subjective look at what you are going with first.

In general, drawer pulls in the middle offer more balance aesthetically. This is due to them being set at the center point of the dresser drawer.

This is essential for those who want to make sure they are considering the nuances of going down this path and how it will look when the dresser is set in the room.

If you want to go with a balanced look then it is best to have the dresser pull in the center.

If you find the dresser pull at the top a better look then that is the direction you will want to go in. Aesthetics do play a role in a decision such as this.

2. Stability

Imagine pulling on a drawer and then realizing it is too heavy or does not seem to come out smoothly.

This is a legitimate concern and sometimes it has to do with how stable the drawer pull is.

In general, a drawer pull in the middle is going to be far more stable. This is due to the location and where it is set up as you pull on the drawer.

The sides are going to be equal, which means when you pull, it is not going to feel odd in your hand.

This does not apply to a drawer pull at the top.

You will notice the weight is going to be at the bottom and it will feel more cumbersome when there are items inside of it.

3. Durability

Thinking about the overall durability of the drawer pull also matters.

When you have a drawer pull at the top, it is going to be less durable. This is due to the amount of force needed to pull the drawer when you are opening it.

This is going to be down to how the weight is set up alongside the handle.

This is not the case when you are looking at a drawer pull in the middle.

It will be far more durable and that does matter to those who want to make sure it comes out smoothly.

4. Weight Distribution

When the weight distribution is not good, you will be unhappy with the results and this can be a legitimate concern with the wrong placement of drawer pulls.

You will want to look at how the drawer pull feels when you pull on it.

For the most part, the weight distribution is going to be a lot better when the drawer pull is in the middle.

The weight is going to be spread across the top and bottom of the pull.

This does not happen when the drawer pull is at the top.

Final Thoughts

Look into these details as you compare setting up the drawer pulls in the middle or top.

A drawer pull in the middle is going to be well-weighted, easier to pull, and easier to set up. In comparison, a drawer pull at the top is much harder to manage and can sometimes look odd.

However, you will only want to think about what works for you.

If you like the look of the drawer pull at the top then that is the direction you should go in. The aesthetics do matter and should be something you keep in mind.

Read More On Drawers:

1. How To Put A Drawer Back Into Place
2. How To Handle Drawer From A Desk
3. How To Take Out A No Lever Drawer

Most people want to get a dresser from point A to point B as soon as possible.

It might be easy depending on how many clothes are inside the dresser. However, you might also want to take out the clothes and then move them.

If you are taking the clothes out then it is going to be much easier to get the dresser to where it needs to be. Of course, what if you want to learn how to move a dresser with clothes in it?

If you want to move a dresser with clothes in it, start by securing loose items inside first. Next, use lifting straps to pick the dresser, keep it straight, and then move it to where it needs to go.

You can move a dresser with clothes in it and this is an option many people think about when it is time to get the dresser to its new location immediately.

Do not rush this process because the dresser is going to be heavier in this state.

Let’s take a look at what you need to do as you learn how to move a dresser with clothes inside.

Best Bedroom Mirror (EDITOR’S CHOICE)

No products found.

How To Move A Dresser With Clothes In It

1. Secure The Loose Items First

Before doing anything, you are going to want to secure any loose items inside the dresser.

Some people are not just going to have clothes in the dresser.

This means you are going to want to be careful about what you are doing and how the items are set up in the dresser. This is going to allow you to freely move the dresser without worrying about damaging anything inside it.

This is common with jewelry and/or other fragile items that can get damaged during a move.

You will also want to think about placing softer items along the sides of each drawer to ensure the clothes don’t tear during the move.

2. Use Lifting Straps To Lift The Dresser

You will want to think about the biggest hurdle when it comes to moving a dresser with clothes inside.

The main issue is going to come in the form of weight.

Are you capable of lifting the weight of a dresser plus clothes? Is it going to be too heavy? Are the clothes spread out or in one drawer?

You will always want to spread out the clothes before moving the dresser. This is the only way to ensure you are not putting too much weight on one side as it is being moved.

The best option is to use lifting straps for this part of the process. It will make things easier for you.

3. Lift In A Straight Line

How are you going to move the dresser with the clothes in it?

You are going to want to think about how the dresser is being moved from point A to point B.

This includes whether or not you are tilting the dresser.

As a result, you will want to make sure the clothes are spread out inside the drawers. This is how you are going to ensure the weight is spread out and you can move the dresser in a straight line.

The goal is to always lift in a straight line to ensure you are not ruining anything and the dresser gets to sit in the same way as it is put in a new spot or on a transportation vehicle.

4. Take Your Time

This is important advice for something like this.

The idea is to make sure you are taking your time during the process.

A lot of people don’t take their time and that is a real point of concern.

You are going to want to make sure the dresser is not tilting as you are moving it and also ensure you are being as patient as you can be.

Final Thoughts

Can you move a dresser with clothes in it?

You can move a dresser with clothes in it. The goal is to make sure you are securing loose items (i.e. jewelry), using lifting straps to lift the dresser, and making sure it is lifted and moved in a straight line.

This is the only way you are going to keep the dresser and its contents safe.

If you rush, you are going to harm the dresser or it is going to feel too heavy. Be patient and make sure to use the right lifting straps.

This is how you are going to appreciate the process and you will not have to empty the dresser before moving it.

Read More On Mirrors:

1. How To Put A Dresser Drawer Back In
2. How To Pull A Drawer From Desk
3. How To Pull A Drawer With No Lever
4. How To Fix A Sagging Drawer

When it’s time to set the drawers into place, it’s not always as easy as it should be.

There might be something snagging on the drawer or not letting it line up the way you want it to.

This is when it becomes important to think about your options and figure out why you can’t get the dresser drawer back in.

If you can’t get the dresser drawer back in, start by lining up the drawer with the slide reel, next press the flange on the side of the dresser, and then slide the drawer into place. Once done, make sure it does not fall when you pull it out.

For the most part, people don’t press the flange on the side of the drawer, which causes it to not go in.

The flange is designed as a locking mechanism to hold the drawer into place when it is in the slide reel.

This guide is going to show you more on what to do as you look to get the dresser drawer back in.

Best Bedroom Mirror (EDITOR’S CHOICE)

No products found.

Tips On How To Get Dresser Drawer Back In

1. Line Up Drawer With The Slide Reel

The main issue people are going to have has to do with how they line up the dresser drawer with the slide reel.

There are two reels on the side, which are going to hold the dresser drawer once you push it into place.

If you don’t take the time to line up both sides equally, it is going to get stuck and will not move further.

This is why you will want to first line up one side and then the other to make sure both are ready to go before you push the dresser drawer further.

You will need to be careful during this step to make sure it does go in as you want it to.

2. Push In On The Flange On The Drawer

Now, you are going to look for the flange on the side of the dresser drawer.

This is a little tab that is going to be in the middle of the dresser’s side reel and it is the first detail you are going to want to look for.

The idea is to press this tab.

The tab is going to act as a lock when you slide it into place. Without pushing at the flange, you are not going to activate this locking mechanism.

You do not want to let go of the tab until it is in place within the dresser. Take your time with this step and make sure you do use the locking mechanism as it is supposed to be used.

3. Slide The Drawer Into Place

You will want to make sure to gently push the drawer into place.

A lot of people will aim to quickly rush the process and that will make it much harder to get it to go through.

In general, your goal has to be to slide the drawer into place just the way you have lined it up. This is how it is going to go into the slide reel the right way.

You will notice it is going to go in smoothly.

If it is not, continue to push on the flange and it will slide further.

4. Make Sure The Drawer Is Secure

Now, you are going to want to test the dresser drawer.

This means pulling at the drawer to see whether or not it comes out.

You don’t want a situation where the dresser drawer goes in but the locking mechanism doesn’t activate. This can happen when the flange on the side gets stuck and stops working properly.

You will want to test this by pulling at the dresser drawer to see if it comes out. If it keeps coming and then falls off the slide reel, this is a problem and you are going to want to tighten the flange.

Final Thoughts

I can’t get the dresser drawer back in!

If you can’t get the dresser drawer back in, the best strategy is to line up the drawer with the slide reel in the dresser, press the flange on the side of the drawer, and then push it in until the drawer locks into place.

You are going to have to look at how you are lining up the dresser drawer during this process.

It is the only way to make sure the dresser drawer does not fall out as soon as you push the flange in. This is a multi-step process, so you are going to want to pay attention to how the dresser drawer sits in the dresser.

Read More On Drawers:

1. Steps To Take Out Drawer From Desk
2. Steps To Take Out Drawer With No Lever
3. How To Manage A Sagging Drawer

When the metal bed frame’s middle support starts to give out, you are going to notice issues with its shape.

The bed frame is going to bend.

This is not a good sign and it is often a warning letting you know the bed frame is weakening and has to be fixed. If you don’t take the time to stabilize the metal bed frame, you are going to have serious issues on your hand to deal with.

This is when it becomes important to learn how to bend back a metal bed frame.

To bend back a metal bed frame, start by measuring the distance between the floor and the lowest point of the bent area. Next, cut plywood and/or metal into a leg to hold that part up. Once the right size is cut, drill into the metal bed frame to secure the leg into place.

When you are done installing the leg on a metal bed frame, it’s time to test it. You will want to see whether or not it can support your weight on that side of the frame.

If it does not, you might need to adjust the leg you are setting up or how many legs are installed.

Here is a look at how to bend back a metal bed frame.

Best Headboard (EDITOR’S CHOICE)

No products found.

Steps On How To Bend Back A Metal Bed Frame

1. Measure Distance Between Floor And The Bent Frame

Before doing anything else, you will want to find out the gap between the floor and the bent part of the metal bed frame.

Why is this important?

It is important because you will want to know how big the new leg needs to be that will go to support the metal bed frame.

Until there is a leg there, it is going to stay bent. There is no other way to fix it.

This is why you want to take multiple measurements to get a good read on what your options are.

2. Cut A Metal or Wooden Leg

You will now want to find metal and/or plywood to help cut out a leg.

This is going to be a subjective call.

It is recommended to find a sturdy material that can hold up a specific amount of weight that will be put on the metal bed frame.

Some will want to use metal but others are going to be fine with strong plywood. It is best to consult with a home hardware specialist to find out what your options are.

Once you do this, you are going to take the measurements from before to begin cutting out the leg.

3. Drill Metal/Wooden Leg Into The Frame

When the leg is ready to go, it is time to drill into the bent part of the metal bed frame.

You are going to want to find the central point of this bent area.

This is where you are going to attach the new leg.

The goal is to prop up the bent part of the metal bed frame with the help of the leg. It is going to go right in the middle and push the bent area up.

4. Test The Bed Frame

When the leg is secured, it is time to test the metal bed frame.

A common mistake people make is to jump onto the bed as that is going to put undue stress on the frame instantly.

You need to test in smaller increments to see whether or not the bed frame makes noise. The goal is to also keep an eye on the leg to see if it moves and/or wilts under the weight.

If it does, you are going to have to tighten the screw you are using to hold it into place.

Final Thoughts

These are important tips as you learn how to bend back a metal bed frame.

To bend back a metal bed frame, it’s best to start by measuring the gap between the bent part of the frame and the floor. Next, cut a leg out of metal and/or plywood based on these measurements. Once the leg is ready, drill into the bent area and secure the leg into place.

At this point, the metal bed frame should be propped up and ready to go.

You will always want to test the bed frame to make sure it is as secure as it needs to be. This includes adding a bit of weight to the bent part of the frame to see how it holds up.

The more you test it, the better it is for the viability of the new change.

Here’s More On Bedrooms:

1. Steps To Repair A Sagging Metal Bed Frame
2. Steps To Improve A Headboard That Doesn’t Fit Bed Frame
3. Assessing The Value Of A Footboard
4. Should Your Headboard & Footboard Work With Adjustable Beds?
5. Does A Metal Bunk Bed Fall Routinely?

When you are working on a metal bed frame, you will assume it’s going to withstand regular stress and will work out as you want it to.

Yes, in most cases, the metal bed frame is going to last a long time and maintain its shape the way it is designed to.

However, you can have a situation where the metal bed frame begins to sag. This is when you need to learn how to fix a sagging metal bed frame.

To fix a sagging metal bed frame, it’s best to start by inspecting for loose bolts/nuts. Next, tighten these bolts and then add plywood underneath as support. You can also add a block underneath depending on what’s available. To complete the job, test the middle of the bed by putting weight on it.

A sagging metal bed frame can be fixed as long as you are taking the time to find the root cause.

This guide is going to highlight how to fix a sagging metal bed frame along with what to use to make sure it stays in the right position for a long time to come.

Best Headboard (EDITOR’S CHOICE)

No products found.

Steps On How To Fix A Sagging Metal Bed Frame

1. Look For Loose Nuts Or Bolts

If a metal bed frame sags, it’s important to look for the most obvious issue.

This is going to come in the form of one of the nuts or bolts loosening. If you are regularly resting on a metal bed frame, it is going to start to weaken.

This happens over time and it is going to be hard to notice until the bed frame sags from one side.

In general, you will want to go to that side and look at the connecting points. This is going to highlight whether or not the issue has to do with a loose nut or bolt.

2. Tighten The Nuts And Bolts

You will now want to go to each nut or bolt in that area and tighten it.

The reason for doing this is to make sure a loose part is not the reason for the sagging metal bed frame. Only then will you be able to move forward to another part of the bed to see what can be done to fix it.

It is common for this to happen, so it should be a priority for you.

When you are tightening the loose bolts, you will want to make sure they are also holding the joint in place.

This means ensuring they are going through the hole and not just spinning in the same spot. This can happen when there is rusting in the metal bed frame or it is not as solid as it needs to be.

3. Place Plywood Underneath The Bed Frame

Let’s assume you have checked the loose bolts and they are good to go.

At this point, you might still have a sagging metal bed frame on your hands.

If that is the case, it is best to look to place something as a new base underneath the metal bed frame. This will have to come in the form of a piece of plywood.

The plywood is going to go near the sagging side and is going to prop it up.

4. Test The Bed Frame

You will want to put the plywood or block underneath the sagging area and then test it.

To test the metal bed frame, you will need to put weight on it. It is best to not jump on the bed frame as it might already be weak.

You will want to gradually add weight on top and see how the bed frame responds. If you notice it start to sag again, you might need to add another piece of plywood to the bottom of the bed frame.

The goal is to stabilize the bed frame and that is going to take a bit of time to do.

Final Thoughts

These are the main steps on how to fix a sagging metal bed frame.

To fix a sagging metal bed frame, it is best to start by tightening all of the loose bolts and/or nuts in the sagging area. Next, place a piece of plywood underneath and then re-test the bed frame to see if it still sags.

You will need to be patient when it comes to this part of the process.

It is common for your first fix to not work out as planned. This means you are going to have to keep solidifying the base as best as you can.

This can be done by being patient and making sure you are only focusing on the sagging part of the metal bed frame.

Here’s More On Bedrooms:

1. Steps To Fix Bent Metal Bed Frame
2. How To Fix Headboard That Doesn’t Fit Bed Frame
3. Advantages And Disadvantages Of A Footboard
4. Does An Existing Headboard & Footboard Sync With Adjustable Beds?
5. Will My Metal Bunk Bed Fall Regularly?
6. Does An Adjustable Base Fit Different Bed Frames?

California Closets has long been the gold standard for premium closets.

It offers refined designs, a wholesome customization process, and the type of detailing needed from a modern service provider.

While they do an exceptional job, it’s important to look at budget options on the open market. You will want to find a cheaper alternative to California Closets and there are a few that stand out.

A cheaper alternative to California Closets includes Closet World, Classy Closets, and Classy Factory. These are budget-friendly, efficient, and offer a long list of viable designs to choose from.

Your goal has to be to look at a closet provider that offers high-quality solutions made of top-tier materials. You should not be cutting corners when it comes to the materials used to put together the closets being sold to you.

With this in mind, it’s essential to dig deeper and find out more about the best cheaper alternative to California Closets.

Best Hanger For Closets (EDITOR’S CHOICE)

No products found.

Finding Cheaper Alternative To California Closets

1. Closet World

This is one of the better alternatives on the market right now.

They continuously put forward deals including free installation and discounted pricing. This is good for those who are simply wanting a premium finish without spending the extra money to get it.

While you might not get the level of customization as you would with California Closets, this is still a great provider.

They have been in the market for a long time and their selection is world-class. You are going to be impressed as soon as you take a look at what they have to offer.

A good thing about Closet World has to do with its well-rounded approach to designing. They understand space efficiency and that is important for those who want to make additional changes to their home.

Whether it has to do with a closet or a new home office, they will know how to personalize it to meet your needs and that is empowering.

2. Closet Factory

This is another alternative that has been around for years and is well-established as a premium closet provider.

The one thing people adore about Closet Factory is the good pricing without compromising on the consultation process. This is an essential phase when coming up with the right design for your needs.

A specialist will guide you during this process and they will be happy to do it through an in-home session too.

This is one of the benefits of going with this type of alternative.

You are going to adore their selection and it is a worthy competition when it comes to California Closets.

3. Classy Closets

The one thing about Classy Closets that stands out has to do with their willingness to work with you.

It is not common to find this on the open market.

You are looking at a provider that will take the time to work on the warranty and is also going to offer good monthly payment terms for you to sign up for.

This can make it easier to set up the closet at home and know you are not going to be blowing a huge chunk out of your budget.

This is what makes it a good cheaper alternative to California Closets.

4. Home Depot

Yes, this is an option you are going to keep in mind.

When you are scouring through the industry looking for the right type of closet, you should also take the time to think about Home Depot.

They have been around for a long time and are appreciated for their attention to detail. You are going to adore the work they put in and how it all comes together.

It is this competency that makes them one of the better options if all you are looking for is a robust solution.

They might not have the same selection or design process, but they do offer high-quality products for you to choose from.

Final Thoughts

Look at these options when finding a cheaper alternative to California Closets.

When it comes to finding a cheaper alternative to California Closets, the recommended options include Classy Closets, Closet World, Closet Factory, and Home Depot. These are renowned providers with quality materials, good customer service, and reasonable pricing.

The best thing you can do during this process is to compare what is out there.

This is going to let you learn more about your options and what needs to be done moving forward.

Don’t stick to one and do take the time to speak to each of them while going through their collection of designs.

Here’s More On Closets:

1. Choosing Between California Closets And Closet America
2. Buying From Elfa Or California Closets
3. Analyzing Home Depot And Closets By Design
4. Analyzing Closet World To California Closets
5. What Does A Sliding Closet Door Need From A Baseboard?