Which Light Bulbs Produce The Least Heat? (And Why!)

Which light bulbs produce the least heat

Heat generation is a legitimate concern when it comes to light bulbs.

Traditional light bulbs have commonly been associated with dramatic increases in room temperatures. This includes summer days becoming intolerable due to the increase in heat when the light is on.

To avoid this, a lot of research has been done by light bulb manufacturers to understand what helps bring this heat generation down.

This includes asking, which light bulbs produce the least heat?

LED light bulbs produce the least heat. These use an advanced lighting mechanism to help illuminate a space without producing excessive heat. Due to its reduced electrical wattage rating, it offers maximum lighting without releasing heat into the room.

It is this reason that is making LED light bulbs the way to go moving forward. More and more homeowners are only using these light bulbs.

Here is a look at some of the reasons why LED light bulbs produce the least heat.

Best Light Bulbs (EDITOR’S CHOICE)

LE 100W Equivalent LED Light Bulbs, 15W 1500 Lumens 5000K...
  • 11000 Hours Lifespan - Each bulb is expected to last over 10 years (based on 3 hours/day), saving you the cost and hassle of...
  • Standard E26 Base - Easily screw into any kind of light fixture with medium screw base. Widely used in table lamps, floor...
  • UL Listed – LE bulbs have been tested and listed by the Underwriter Laboratories, meaning it has met their rigorous...

Last update on 2021-09-24 / Affiliate links / Images from Amazon Product Advertising API

Benefits of LED Light Bulbs For Less Heat

1. Refined Energy Conversion

When it comes to the best low heat light bulbs, it is important to understand what causes heat to be produced in the first place.

Heat is generated because the energy has to disperse somewhere. The reason a light bulb illuminates is due to the surge of electricity that runs through it and that causes heat to be produced.

When that heat has to spread out, it will release from the light bulb.

LED light bulbs do a good job of reducing the effect. The energy conversion process associated with an LED light bulb is different than a traditional light bulb or any other version.

The LED light bulb is going to produce a good amount of light without releasing heat. This is in comparison to incandescent and fluorescent bulbs.

If you are worried about the room’s temperature rising, it’s best to switch the light bulbs immediately. It’s a quick fix that should offer long-term benefits.

Which light bulbs produce the least heat

2. Lower Electrical Wattage Rating

LED light bulbs come with a set electrical wattage rating that is far below other options including incandescent bulbs.

This means it requires fewer watts to produce the same amount of light.

It’s critical to use a light bulb that offers this capability and that’s what you are going to get with an LED light bulb. It will help fill the room with light and not produce the same amount of heat as any other type of bulb.

By setting up the bulb, you will know it’s going to perform well and keep the room cool at the same time. This is a win-win.

Another benefit associated with using a bulb with a lower electrical wattage rating involves energy consumption. Since the light is going to be on all the time, you don’t want to rack up a high utility bill.

In this case, you won’t have to and that is beneficial when it comes to your expenses.

Which light bulbs produce the least heat

3. Good Illumination Without Heat

The amount of illumination in the room is not going to go down by using an LED light bulb.

To the surprise of many people, when you go with the right type of LED light bulb, it’s going to produce a consistent stream of light and it will last for a long time.

This makes it ideal for modern homes.

You are going to enjoy setting up the LED light bulb knowing it will age gracefully and is going to fill the room with quality light.

For those residing in warmer climates, you will want to look into these bulbs immediately. They are going to produce the least heat on the market right now and will be an easy addition to your home.

Make sure to only buy from the right manufacturer and ensure it will work well for your room. This is what matters the most.

Final Thoughts

Which light bulbs produce the least heat?

LED light bulbs produce the least heat. This is due to the reduced electrical wattage rating and overall build quality. Unlike fluorescent and incandescent light bulbs, these are well-known for producing exceptional results without releasing excess heat.

You can easily set LED light bulbs in a modern home and feel good about the room temperature. It is not going to rise even if the LED light is on throughout the day.

This is ideal for those tired of having their room become hotter by a few degrees due to the light being on.

Go with a good LED light bulb and you won’t have to face this issue ever again.

Read More On Lights:

  1. Tips For Painting A Light Bulb
  2. Using Special Light Bulbs For Dimmers
  3. Reasons Light Fixture Is Refusing To Function
  4. How To Take Light Cover Off
  5. How To Use Floor Lamp For Light Near TV

How To Cool Down A Room With Ice (Step-By-Step!)

how to cool down a room with ice

Learning how to cool a room without AC is an interesting task.

You will want to make use of a natural product that is synonymous with cooling. This is none other than simple ice.

Ice works well when it is time to cool food and drinks, but does it do a good job with a room? Can you cool down a room using ice?

A room can be cooled with ice by taking a bowl of fresh ice and placing it in front of a blowing fan. This will allow a cool breeze to spread through the room. It’s recommended to use a non-oscillating fan when doing this to keep the ice in front.

If you are focused on cooling a room in the house, this is a simple trick that has worked for years. It is effective, safe, and easy to replenish when necessary.

Here is a look at how to cool a room using ice and what to consider during the process. You can learn how to cool a room down fast with ice because it will take effect immediately.

Best Fan For House (EDITOR’S CHOICE)

Honeywell HYF290B Quietset 8-Speed Whole-Room Tower Fan With...
  • Included Components: Honeywell QuietSet Whole Room Tower Fan - Black, HYF290B
  • Voltage: 100120

Last update on 2021-09-24 / Affiliate links / Images from Amazon Product Advertising API

Steps On How To Cool A Room With Ice

1. Fill A Bowl With Fresh Ice

When it comes to keeping a room cool without an AC, you will want to start with a bowl of ice.

Grab a sizable bowl that will let you fill it up with loads of ice. Make sure the ice is not already melting as it will turn into liquid quickly before the method takes effect.

If you grab fresh ice from the freezer, you are going to be good to go. Pour it into the bowl and make sure it is to the top.

If you go with a smaller bowl, this might not work as well or you will have to replenish the ice within minutes. Go with a larger bowl for peace of mind.

2. Set Up Fan On The Floor

You will now want to start focusing on how to cool a room with a fan and ice.

The goal is to start by setting up the fan on the floor. You are going to want to set up the fan in an optimal space where it will easily spread a cool breeze from one end to the other.

It’s important to get the positioning right because you can’t have the oscillation feature on during this method. It won’t work.

The fan is only going to be pointing towards one part of the house, so getting the positioning right is a must.

how to cool down a room with ice

3. Point Fan Towards The Area Being Cooled

When it comes to fan hacks to keep cool, the direction you are pointing the fan in matters.

It doesn’t matter how large the bowl of ice is if you don’t get the fan’s positioning right. The idea is to look at the room you want to cool and make sure the breeze is spreading throughout the area.

You can test this by standing in front of the fan before using the ice.

Once you are satisfied, you can then move on to the next step. Learning how to position a fan to cool the room matters and it starts by pointing it in the right direction.

4. Place Bowl In Front Of The Fan

The next step is going to be to take the ice and place it directly in front of the fan.

You don’t want it to the side. It should be straight in front of the fan as that is where the breeze will push past the ice and into the room.

This will spread a cool breeze that is pleasant especially if you are close to the fan. Even if you are not, the cool breeze is going to spread everywhere as it continues to run in the background.

For those wondering whether it’s best to put ice behind the fan or in front, there’s no valuable reason to have it behind the fan. It won’t work. It should be right in front for maximum efficiency and cooling.

This is a great way to cool a space using ice and a fan.

how to cool down a room with ice

5. Refill the Ice

The last step is to make sure you are refilling the ice as it turns into liquid.

This should not take a long time to do and you should focus on keeping an eye on the bowl from time to time.

If the bowl of ice is large enough, it’s going to last for a substantial amount of time. Just continue to fill the ice to the top and let the fan do its thing.

Final Thoughts

These are the steps on how to cool down a room with ice.

When looking to cool a room using ice, you will want to start with a bowl full of fresh ice. Place the fan in front of the room being cooled and then use the ice. To do this, you will place the ice in front of the fan as it runs. This will cool the space right away.

Read More About Ice and Cooling:

  1. Reasons AC Smells Like Vinegar
  2. How To Fix Broken Fridge Ice Maker
  3. Can Fridge Make Ice Without Access To A Water Line?
  4. Reasons Fridge Is Freezing Up
  5. Reasons Fridge’s Light Is On Without Cooling Food

5 Reasons Air Conditioner Smells Like Vinegar (And How To Fix It!)

air conditioner smells like vinegar

The bitter odor of vinegar lingering in the air is immediately off-putting.

When you turn on the air conditioner during a warm summer’s day, it’s never ideal to whiff a strong scent of odor inside the house. This will cause a panic as the scent gets worse with each passing minute.

If you are in this predicament, it’s important to find out what’s going on. There are several reasons for an air conditioner smelling like vinegar.

Air conditioners can start to smell like vinegar when the electric motor is releasing ozone. It’s also common for this sour smell to spread due to the filter malfunctioning, condensate pan getting clogged, mold developing in the ducts, or extra condensation presenting itself on the coils.

This is a dangerous problem to deal with and it should be rectified as soon as possible. If the air conditioner is emitting ozone, this is not a good situation to be in. It will cause harm if left untouched.

This article will look at the main reasons an air conditioner smells like vinegar and what to do about it.

Best Air Purifier (EDITOR’S CHOICE)

Medify MA-25 Air Purifier with H13 True HEPA Filter | 500 sq...
  • MAXIMUM COVERAGE: Cleans spaces up to 1,000 sq ft in one hour, 500 sq ft in 30 minutes (CADR 230). Ideal for homes,...
  • HEPA H13 FILTRATION: Trusted to remove 99.9% of particles including odors, smoke, pet dander, dust, and more down to 0.1...
  • ULTRA QUIET: Choose from 3 fan speeds, with the lowest setting operating virtually silent. Runs at 110 Volts at a min noise...

Last update on 2021-09-23 / Affiliate links / Images from Amazon Product Advertising API

Reasons Why Your Air Conditioner Smells Like Vinegar

1. Electric Motor Releasing Ozone

When an electric motor has been damaged, it’s common for the ozone smell to increase.

Even a functional electric motor will naturally produce ozone. It will be limited in amount, but you can get a whiff if you get close enough to the motor. Once it is on, it will start to produce this gaseous substance and release it into the air.

However, when the electric motor’s components are malfunctioning, the ozone smell can worsen.

This will make the air conditioning smell like vinegar.

Recommended Solution

The best course of action is to check the wiring near the electric motor. When the wiring splices or breaks, it’s possible for ozone production to increase.

If you fix the wiring, it will ensure the air conditioner works as designed and the smell goes into the background.

2. Extra Condensation On The Coils

When the airflow is impeded due to a dirty filter, the smell of vinegar can spread around the house.

This occurs because the coils get covered with extra condensation.

This is not good for the coils and will cause the AC to lose its efficiency. You will notice sputtering results and it will also start producing ineffective cooling depending on how severe the issue is.

With time, you will have an AC that smells like vinegar and it will be noticeable.

Recommended Solution

To get rid of the extra condensation on the coils, it’s important to clean the coils and change the filter.

This will improve the airflow in the AC and get it back to how it was. Make sure to clean the surrounding elements once you get started. This will act as a preventative solution for potential issues in the future.

air conditioner smells like vinegar

3. Mold in the Ductwork

Moisture in the ducts can be a real troublemaker.

You will have serious issues to deal with and this goes beyond the air conditioner. If the AC is smelling of vinegar then it’s best to assess the ductwork in the property.

This might shed light on developing mold inside the ductwork.

It is important to clean the mold and make sure it is removed as soon as possible.

Recommended Solution

Find where excess moisture is developing in the ducts. Assess the mold and make sure to get rid of it right away.

This can be done with the help of a seasoned professional to make sure the mold is removed efficiently. You don’t want mold to be leftover as it will spread again.

4. Condensate Pan Is Clogged

If a window AC smells like vinegar then it’s time to assess the condensate pan.

The condensate pan is right below the water coil in an AC. This pan is solely responsible for collecting any moisture that is dripping from the fixture once it’s on.

Unfortunately, this is a component that can get clogged over time.

Recommended Solution

To resolve this issue, you will want to take a gallon of water and pour it into the overflow pan. This will be located under the air handler.

Continue to assess the pan and see if the water drains into the secondary drain line. If it does, you are good to go and the smell will disappear. If not, continue pouring and watch for the clog to open up.

air conditioner smells like vinegar

5. Filter Is Malfunctioning

This is a common reason why an air conditioner is smelling like vinegar.

The sour smell will spread and it is only going to get worse as the filter ages. The more pollutants that accumulate inside the filter, the worse it’s going to get.

Recommended Solution

This is a simple solution.

You will want to change the filter and reconnect it inside the air conditioner. If it is not clicking into place, check where the filter is being held.

You might have to make adjustments to the connection points ensuring the filter is in the right spot throughout the day.

Final Thoughts

These are the reasons your air conditioner smells like vinegar.

An air conditioner can smell like vinegar because the condensate pan is clogged or the electric motor is producing ozone. It is also possible for mold to be in the ductwork, the filter malfunctioning, or there being extra condensation on the coils.

Read More About HVAC:

  1. How To Use Ductless Fans
  2. Smell Of Gas From Kitchen
  3. How To Choose A Vent
  4. Reasons A Bedroom Smells
  5. Heat From A Bathroom Vent

Can A Doorbell Transformer Cause A Fire?

Can a doorbell transformer cause a fire

The doorbell transformer is designed to carry power to the doorbell. It comes in a metal box with two terminals connecting the power source to the doorbell.

A doorbell transformer needs to be protected to avoid sparking and/or fire.

A common question that does arise is, can a doorbell transformer cause a fire?

A doorbell transformer will not catch on fire due to its high leakage resistance. Even when the unit short-circuits, it will remain protected from overheating.

It’s recommended to continue checking the structural integrity of the metal box to ensure it’s fully intact. If this is compromised then the transformer’s natural resistance will also depreciate.

Here is a look at a few tips on how to make sure a doorbell transformer does not catch on fire.

Best Wireless Doorbell (EDITOR’S CHOICE)

Wireless Door Bell, AVANTEK CW-11 Mini Waterpoof Doorbell...
  • SIMPLE SETUP: Just plug the mini receiver into a socket and fix the transmitter on a wall with the accessories provided;...
  • 300 M/1000 FT ULTRA LONG WIRELESS RANGE: 1 plug-in receiver included; will not interfere with other equipment in your home or...
  • 52 CHIMES TO CHOOSE FROM: 1.1 in (29 mm) stereo speaker delivers rich and crisp sound; 5 adjustable volume levels with a...

Last update on 2021-09-21 / Affiliate links / Images from Amazon Product Advertising API

Tips On Preventing Doorbell Transformer Fire

1. Inspect the Metal Box

The placement of a metal box is important.

It should be close to the electrical panel box to make sure the incoming wiring isn’t stretched out. You want to minimize the distance between the panel and the transformer to avoid unnecessary damage or risk.

It’s also smart to inspect the doorbell transformer by assessing its outer shell.

A common worry is the metal box becomes compromised and stops functioning the way it is supposed to. Remember, the doorbell transformer doesn’t catch on fire because it has built-in mechanisms to prevent damage such as this.

If you are not careful, the metal box can begin to break down. This is when it becomes much harder to keep the doorbell transformer protected.

The best course of action is to look at the metal box and see whether or not it’s appropriately sealed. If there are cracks and/or holes, you will want to replace the exterior shell to avoid unwanted damage later on.

Even if a fire doesn’t break out, other issues should be avoided (i.e. damaged wiring, drops in power output).

Can a doorbell transformer cause a fire

2. The Wiring Should Be Intact

The wiring is where most of the trouble arises.

Doorbell transformers do not catch on fire easily because they have built-in mechanisms to prevent such an occurrence from happening. This includes having a safety mechanism to ensure any short-circuiting doesn’t cause a fire.

It’s important to test the wiring and make sure it is not spliced.

When the doorbell transformer’s wires are compromised, this can pass the electricity on in a dangerous way. It can also expose the current to the metal box surrounding the internal components.

You will want to test the wiring and make sure it is fully protected within the metal box.

This will ensure when the doorbell transformer is passing energy onto the doorbell, it isn’t going to spark a fire or create unwanted damage.

You should also take the time to look at the wiring going into the doorbell transformer. This will make sure external wiring isn’t the reason for a fire breaking out.

Can a doorbell transformer cause a fire

3. Check The Voltage Output

Have you taken the time to check the voltage output in the home?

This includes the voltage that is coming out of the doorbell transformer. It’s important to understand how critical the voltage is when it comes to safety inside the property. You will want to ensure it is stabilized.

Test the voltage and make sure the current is enough for the doorbell to work. You will notice the doorbell start to buzz when there are issues with its transformer.

Immediately assess the wires and the surrounding components to see whether or not there is some type of damage to take care of.

If there is, you will want to replace one or more of these components right away. The chances of a fire breaking out do increase even if they are still slim compared to other fixtures in the house.

Final Thoughts

Can a doorbell transformer cause a fire?

Doorbell transformers do not catch on fire and have a built-in safety mechanism to prevent unwanted sparking. This is due to high leakage resistance and short-circuit safety prevention built into the unit.

The only time a person has to worry about a doorbell transformer causing a fire is if the components are broken. A fully functional transformer is not going to pose a risk.

Continue to inspect the doorbell transformer and ensure it is in good condition year-round. This also includes other components attached to the doorbell such as the button switch, pistons, and wiring going into the unit.

By doing this, you will know the doorbell is fully functional and safe inside the house. The one thing you don’t want to do is let this problem worsen. Correct the issue right away.

Read More On Doors:

  1. Dealing With A Buzzing Doorbell
  2. Using Glass Door Properly For Fireplace
  3. How To Move Furniture Through Smaller Doors
  4. Installing External Door For Kitchen
  5. Choosing Interior Doors With Kitchen Cabinets

Why Is Doorbell Buzzing? (Helpful Tips!)

doorbell buzzing

A buzzing doorbell is not an ideal sound to deal with.

It can become frustrating and impact your time inside the house. Due to this, it’s important to get to the bottom of why a doorbell is buzzing and what’s needed to fix it.

A doorbell can start buzzing when the button switch is stuck, the pistons have stopped working, or the voltage is off. It’s recommended to switch the problematic part to stop the doorbell from buzzing.

A lot of homeowners worry this is going to be a challenging task. It is not.

You should be able to replace the button switch, piston, or wiring within minutes. It’s simply important to inspect the doorbell to figure out why it’s buzzing before doing anything else. This will shed light on what should happen moving forward.

This article is going to look at some of the reasons a doorbell starts buzzing and how to fix it safely.

Best Wireless Doorbell (EDITOR’S CHOICE)

Wireless Door Bell, AVANTEK CW-11 Mini Waterpoof Doorbell...
  • SIMPLE SETUP: Just plug the mini receiver into a socket and fix the transmitter on a wall with the accessories provided;...
  • 300 M/1000 FT ULTRA LONG WIRELESS RANGE: 1 plug-in receiver included; will not interfere with other equipment in your home or...
  • 52 CHIMES TO CHOOSE FROM: 1.1 in (29 mm) stereo speaker delivers rich and crisp sound; 5 adjustable volume levels with a...

Last update on 2021-09-21 / Affiliate links / Images from Amazon Product Advertising API

Reasons For Doorbell Buzzing

1. Stuck Button Switch

One of the more common problems with a doorbell buzzing is the button switch.

This is how the bell is rung and it has several internal mechanisms that play an important role in how it works.

There are multiple components (i.e. button switch, transformer, chime, and wires) associated with the doorbell. It’s best to start with the button switch because it can get stuck. This causes it to continue buzzing until it’s released.

2. Damaged Pistons

The doorbell’s pistons can start to wear down.

This will cause the doorbell to buzz but not ring. The most common reason has to do with overuse and aging, which is why maintaining a doorbell is just as important as any other part of the house.

With damaged pistons, you will want to open the doorbell and wipe the pistons using alcohol. This should help clean things up and repair the problem.

In some cases, the piston might be too far gone and will have to be replaced. Before doing that, use a little bit of alcohol and see how the piston responds. If it doesn’t work, you can look at considering a replacement piston for the doorbell.

doorbell buzzing

3. Incorrect Voltage

There is wiring attached to the doorbell.

This is where it gets the power from and this wiring needs to be fine-tuned for a doorbell to work. If the wire is loose or the electricity isn’t going to where it needs to, this will have a disappointing effect on the doorbell.

The buzzing will continue because the electricity isn’t getting through to the unit.

You will want to open the doorbell, test the voltage, and see whether or not it is at the right level. You might have to replace the wire as it can eventually break or splice.

How To Fix Doorbell Buzzing

1. Inspect the Doorbell

The first step is to inspect the doorbell.

To do this, you are going to want to do a simple visual check and then press the doorbell to see when the buzzing noise comes. If it is a persistent noise then you will want to move onto the next step by opening the doorbell up.

It’s important to complete your inspection to see what the root cause is. You don’t want to start fixing everything as that might worsen the issue.

2. Use Screwdriver To Access Button Switch

Take a screwdriver and open up the doorbell.

You will want to get into the doorbell to see what’s going on behind the front plate. This includes the button switch, wiring, and everything else connected to the doorbell.

Make sure to do this methodically and keep the screws in your pocket for later. Do not lose them!

Be careful when you are doing this and make sure to turn off the electrical supply if you begin touching the wiring. This is dangerous and you should not be doing it with the power running to the doorbell.

doorbell buzzing

3. Disconnect Wiring

At this stage, you will want to disconnect the wiring.

The goal is to see whether or not the wiring has been compromised. This can be the case if the wiring is broken and/or loose.

You will want to test the wire and even run a voltage check to see if enough power is coming through the wiring.

4. Replace The Button or Wiring

If a simple repair doesn’t work, you will have to consider replacing the damaged component.

This can be a number of things including a button or the wiring. It’s best to start with the button switch as it might be stuck or broken. If so, you will want to take your time and replace the button switch entirely.

If the wiring is an issue then you will want to replace it too.

doorbell buzzing

5. Reconnect The Wiring

Once you are done, reconnect the wiring back to where it was and screw the plate back into place. You will want to do this carefully to avoid breaking anything else.

Remember, the doorbell has multiple components and even one getting ruined is enough to damage the doorbell.

Final Thoughts

Why is your doorbell buzzing all the time?

A doorbell can start buzzing all the time because its button switch is stuck, the wiring has spliced, or the pistons are damaged. It’s recommended to unscrew the front plate and check which component is damaged before repairing or replacing it.

Read More On Doors:

  1. Tips For Doorbell Transformer Protection
  2. How To Use Fireplace Glass Doors
  3. How To Fit Furniture Through Doors
  4. Setting Up External Door For Kitchen
  5. How To Match Cabinets With Interior Doors

Can You Tile Over Drywall?

tile over drywall

Installing tiles over drywall can be a challenging proposition.

Most people assume it’s a task that’s impossible to complete because drywall can be flimsy. This is an essential detail to think about but it is incorrect.

You can safely tile over drywall as long as it’s not exposed to moisture. If there’s excess moisture or water near the tile, it will leak through the tile and lead to unwanted damage. Due to this, it’s recommended to avoid putting tile over drywall in the bathroom.

A lot of people worry about where they’re installing the tiles in their homes.

It’s best to take a step back and assess the structural integrity of the drywall. This will shed light on your options and what needs to happen next when it comes to the installation phase.

This article will look at installing tile over drywall and whether or not it’s safe.

Best Tile Cutter (EDITOR’S CHOICE)

SKIL 3540-02 7-Inch Wet Tile Saw , Red
  • Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
  • Adjustable rip fence with miter gauge for accurate straight and miter cuts
  • Blade cooling water reservoir to keep blade cool while minimizing dust and debris

Last update on 2021-09-20 / Affiliate links / Images from Amazon Product Advertising API

Where Can You Tile Over Drywall?

1. Living Rooms

Living rooms can accept tiles.

It’s common for certain features to be tiled in this part of the house. Living rooms and/or family rooms will provide enough space and moisture-free areas to make sure the tiles will remain steady once installed.

This is why adding tiles in a living room is fine. You can easily install the tile over drywall and know the design is going to hold.

tile over drywall

2. Bedrooms

If you want to add tiles in a bedroom then this might be a good way to do so.

The drywall is not going to hinder the installation as long as the temperature is appropriately controlled throughout the year.

This will ensure moisture doesn’t seep through and cause damage. This is why bedrooms work well for installing tiles over drywall.

You will not have to worry about underlying damage because it’s rare for moisture to spread to this part of the house. If the tiles are installed properly, they are going to age gracefully.

3. General Rooms

Most rooms around the house can welcome tiles.

It is only specific parts of the home such as a bathroom or sauna room that should not include tiles over drywall. This is due to the amount of moisture that’s present in these rooms.

Any other room will be fine.

This includes any den or other traditional living space within a property. You can easily install tiles over drywall without compromising the room or the wall itself. This provides peace of mind to those who want to make sure the results are in line with what they want.

Why Can’t You Tile Over Drywall In Wet Spaces?

1. Pests

Can you tile over drywall in the shower?

The main issue has to do with mold but pests can also become troublesome. You will start to accumulate and welcome pests underneath the tile due to the amount of moisture that’s present in the gaps.

It’s important to install the tiles properly and avoid putting them in wet spaces due to this reason.

If there is too much water underneath the tile, it will start to welcome pests. They will make this part of the house their home and become quite difficult to remove.

2. Mold

Mold is a serious concern and one of the main reasons to not installed tile over drywall in the bathroom.

It simply won’t be a good idea.

The amount of moisture that’s present in the bathroom tends to be quite high. This leads to a situation where the tile doesn’t settle on the drywall and it doesn’t age well.

This also includes the amount of mold that pops up in the bathroom due to the tiles. You have to make sure the installation is done properly and that doesn’t include setting tiles over drywall in the bathroom.

tile over drywall

3. General Water Damage

It’s important to understand that general water damage is also a concern.

You don’t want a situation where too much water is spreading underneath the tile because it will cause everything to break down.

This is a real concern and something you have to account for as a homeowner. If water starts to seep through the tile, it will get to the point where everything begins breaking apart.

You have to be careful when it comes to this as that is the only way to feel confident about what you are doing.

Final Thoughts

These are the main details to focus on when considering installing tile over drywall.

Installing tile over drywall is safe as long as it is not included in a moisture-ridden space. This can include a sauna room or bathroom. Too much moisture will loosen the tiles and lead to severe issues including mold or pests.

It’s best to look to add tiles in other parts of the house to avoid issues involving the tiles settling.

Read More On Tiles:

  1. How To Paint Tile Floors
  2. Reasons Water Is Coming Through Floor Tiles
  3. Installing Floor Over Ceramic Tile
  4. Leaking Toilet Through Floor Tiles
  5. How To Protect Floor Tiles When Removing Bathtub

Neutral Vs Ground – What’s The Difference?

neutral vs ground

It’s common for homeowners to get confused when comparing neutral and ground wires.

Most people will assume both go into the breaker box and serve the same purpose. You might find it challenging to tell the difference, but there is one.

The ground wire is responsible for providing an electrical current to the earth, while a neutral wire is responsible for an electrical current to return to its source. The idea is to have a sustainable loop for the current to flow through making both wires integral to the setup.

Yes, there are similarities between a neutral vs ground wire but there are differences too. They are not an exact match.

This article will shed light on this neutral vs ground wire debate in greater detail.

Best Ground Wire (EDITOR’S CHOICE)

PHAT SATELLITE INTL - Solid Pure Copper Grounding Cable, 12...
  • 15ft, Green, 12 AWG (#12 Gauge) Grounding Wire.
  • 100% Pure Solid Bare Copper Core
  • THW Jacket - May be used in wet or dry locations

Last update on 2021-09-20 / Affiliate links / Images from Amazon Product Advertising API

Color of the Electrical Wiring

To get started, it’s important to know what you’re looking at in a breaker box. There will be multiple wires and each one is going to have a distinct color.

This is how you can differentiate between a ground, neutral, and hot wire.

The colors are:

  • Ground Wire – Green
  • Neutral Wire – White
  • Hot Wire – Black, Red, Other Color

Look for these colors to know what the wire’s role is in the breaker box.

neutral vs ground

Role of the Ground Wire

Let’s begin with the basics.

A ground wire is essential to creating a safe and effective electrical loop. The electricity has to flow within a circuit by starting at the source, reaching its destination, and then returning to its source in one continuous cycle.

If there is any interruption in this cycle, the loop will close leading to a power outage. Maintaining a continuous circuit is essential and the ground wire has a role to play in all of this.

In general, a system is going to have both a neutral and ground wire.

The ground wire is designed to regulate the electricity by having a connection straight into the ground. It goes from the metal casing straight into the ground.

This is done to make sure there’s a conductor in the setup. This is designed as a safety mechanism to ensure an electrical circuit overshooting its energy output doesn’t lead to a fire or shock. By having the electricity continue to flow through the ground wire, it’s easier to prevent shocks from taking place.

neutral vs ground

Connection Between Ground Wire and Neutral Wire

So, where does the neutral wire come into all of this?

The neutral wire goes into the same breaker box as the ground wire. It is designed to help complete the loop as the electricity comes in from the source. To do this, the two wires are connected.

The neutral wire allows the current to flow through the ground wire into the breaker box and then through the neutral wire before being used.

It’s important to note, the system has three wires (ground, neutral, hot). This completes the cycle.

If one of those wires is loose or off, it will short the circuit leading to damage or a lack of power.

It’s an essential safety mechanism that ensures the breaker doesn’t trip at any stage.

A common question that arises includes what’s the difference between a neutral and ground wire? Aren’t they both safe to use when completing an electrical circuit?

In general, the neutral wire is also a source of power and it’s not just a safety mechanism. The idea is to have a neutral wire to ensure there’s additional safety to avoid dangerous exposure. Only the hot wire is dangerous as it is fully exposed when it makes contact with metal.

neutral vs ground

Key Benefit of a Ground Wire

The ground wire has a clear-cut purpose when it comes to the electrical circuit.

While it is not required to run an appliance, it is essential for safety purposes. It is not legal or viable to have an inspected circuit in place that doesn’t have a ground wire.

The main example given is when the hot wire comes loose with the electrical current running through it. When this current touches metal, it will now make that entire box an electrical hazard that shocks upon contact.

Without a ground wire, there is no protective cover when this takes place.

As a result, the electricity needs to complete the “loop” by using another source. This source becomes the person touching the metal box leading to a severe electrical shock.

Due to this, a lot of time and effort is spent on using both a ground and neutral wire to have a foolproof setup.

Final Thoughts

This is the information to keep in mind when comparing neutral vs ground wire.

A neutral wire is designed to help promote a natural flow to the electrical current, while the ground wire is connected to the earth as a safety measure. This allows the electricity to go through the loop before being used via a hot wire.

Read More On Living Rooms:

  1. Choosing The Right Wire Size For 60 Amps
  2. Reasons Light Fixture Stopped Working
  3. Number of Outlets In 20 Amp Circuit
  4. Finding The Right Circuit For Small Appliances
  5. How To Set Up Dimmer And Wiring For LED Lights

Why Is Light Fixture Not Working? (Helpful Tips!)

light fixture not working

A damaged light fixture is not always easy to fix.

Most people will look to change the light bulb and that is indeed one of the potential issues that can arise. However, it’s also important to dig deeper to understand what can go wrong in a situation such as this and what to look out for.

There are several reasons for a light fixture not working.

A light fixture might stop working because of a burnt light bulb, loose wiring, or the main power supply getting shut off. It’s recommended to change the light bulb and reset the power supply to see if it helps.

In some cases, you will have to call an electrician to see where the wiring has become loose. It’s rare for this to happen but it is a good idea to look. If there is loose wiring, this can also pose a safety risk and spark a fire indoors.

Here is a breakdown of some of the reasons a light isn’t working and what to do about it at home.

Best Light Fixture For Room (EDITOR’S CHOICE)

Q&S Farmhouse Industrial Semi Ceiling Light Fixture Flush...
  • Perfect Design:The hallway ceiling light decorated farm-style elements,make up of round metal in brown and a unique...
  • Easy to Assembly:The hallway light come with all installed hareware and say in a clear direction.Installing this ceiling...
  • Widely Application: The light fixtures ceiling mount is perfect for hallway,bedroom kitchen,dining room,laundry room,etc.This...

Last update on 2021-09-17 / Affiliate links / Images from Amazon Product Advertising API

Reasons Your Light Fixture Is Not Working

1. Burnt Light Bulb

If a light is not working but has power then it likely has to do with a burnt light bulb.

Most light bulbs are going to last for a few months before dying out. This is why you have to be on the ball and make sure to have light bulbs ready to go at home.

This is the only way to swap out the burnt light bulb with a brand-new one.

Before changing the light bulb, it’s best to see if it has come loose. There are times when the light bulb is okay but it has loosened due to movement. When this happens, the light bulb will stop working the way you want it to.

Try tightening the bulb and then give it a shot.

If it still doesn’t work then you will want to change the bulb.

light fixture not working

2. Loose Connection

With a ceiling light fixture not working, it becomes imperative to figure out what is going on. The best way to test the fixture is to inspect the connection.

This includes the bulb, wires, and anything else that is running to the fixture.

Don’t assume a connection is okay before you take a proper look. This is the only way to make sure the connection isn’t damaged and will continue to work as you want it to.

Keep this in mind when it comes to testing the connection to see how it works. This can happen when a new light fixture is not working.

3. Power Supply Turned Off

One of the more common issues has to do with the power supply at home.

Your power supply might have been turned off. This can cause a situation where there is nothing going to the light fixture and that is what causes it to not work at all.

You will want to take the time to test the power supply and turn it on. Just resetting the power supply can help all of the light fixtures at home work.

To see if this is the problem, you can also test other units in the same room. If the power supply is gone, everything will stop working together. When this happens, it is almost always going to be the root source.

This is why there is no power to the ceiling light.

light fixture not working

4. Light Bulb Socket Is Damaged

It’s possible the light bulb socket has been ruined.

This can occur depending on the connection and power going into the socket. When this happens, it’s common for the light bulb to stop working as there is nothing to spark it.

Your goal will be to replace the light socket and then test the bulb to see if it’s working.

Final Thoughts

These are the main reasons a light fixture is not working.

A light fixture can stop working because the main power supply has been shut off, the light bulb is burnt, or the wiring is loose. Each situation is unique and it’s best to test the light fixture to see what’s going on.

The first change should be the light bulb. This is the easiest fix and the most common reason for a lighting fixture not working at home.

Be methodical with what you are doing and take your time with each step in the process. This is the only way to make sure you see the results that you want.

Remember, whenever you do work on a lighting fixture, always turn off the power supply. You don’t want to get electrocuted while testing the bulb or any other relevant component.

Read More On Living Rooms:

  1. How To Get Light Cover Off
  2. How To Paint A Bulb At Home
  3. Using A Salt Lamp For Spirits
  4. Setting Up A Lava Lamp
  5. Cons of Shaking A Lava Lamp

Should TV Overhang The Stand?

should tv overhang the stand

Setting a TV on a stand is common for most homes.

It’s a great way to set up an aesthetically pleasing fixture in your room that looks appealing and has all the qualities a person needs for their viewing experience.

While this is true, you will want to make sure the TV and stand go together seamlessly. This includes asking, should a TV overhang the stand?

A TV can overhang the stand by 3 inches on both sides. It’s recommended to remain within this limit to avoid tilting and/or related damage due to extensive overhanging.

It’s important to look at how stable the TV stand is before doing this. If it is already wobbling then it might not be safe to do this. Look at the situation in front of you and then decide what is best moving forward.

This article will look at a few things to consider before seeing if a TV should overhang the stand.


GAZHOME Farmhouse TV Stand with Sliding Barn Doors, Modern...
  • SIMPLE & RUSTIC FARMHOUSE STYLE – If you are a fan of rustic farmhouse style and love to add some natural sense to your...
  • PREMIUM MATERIAL WITH VIVID WOOD GRAIN – Made of high-quality MDF material and covered by premium ABS finish with vivid...
  • STRONG & DURABLE STEEL SLIDING RAIL – The two rustic barndoor on the front of this TV stand for consoles and media players...

Last update on 2021-09-17 / Affiliate links / Images from Amazon Product Advertising API

Tips On How A TV Can Overhang The Stand

1. Aim for Less Than 3″

You will want to start with a simple rule of thumb.

A TV will be too big for a stand when it’s over 3″ on both sides. This is when the TV will begin to look odd and it might also become unstable.

The best course of action is to look to measure the TV stand and see what works best for the situation in front of you. If it seems like the TV will topple over because it’s overhanging too much then it’s best to look for another solution.

You don’t want a situation where it is 10″ too big. This can cause the TV to fall easily.

It also won’t look as good, which is another factor that has to be taken into account. A TV that doesn’t go with the stand will always look unappealing.

should tv overhang the stand

2. Test the Stand’s Stability

You will want to take the time to test the TV stand’s stability.

Imagine setting up a new TV on the stand and then realizing it is wobbling too much! This happens a lot more than you think and it’s common for TV to start falling due to this reason.

It’s your responsibility to take a look at how stable the TV stand is well in advance. This will ensure you are prepared for the TV wobbling.

If the stand is doing this, you will want to look for an alternative rather than taking the risk. Your TV could fall because the TV stand is unstable. This is not worth the risk.

If you believe the TV stand can be fixed then it’s recommended to do so before placing the TV on it. What you don’t want to do is begin to make changes after as that might already be too late.

Always test how stable a TV stand is and then see how that is going to be impacted by an oversized TV. It’s better to not have a TV that overhangs the stand but a few inches is fine if the stand itself is stabilized.

should tv overhang the stand

3. Keep The TV Centered

You will always want to keep the TV centered on the stand.

The reason has to do with a TV toppling over as soon as someone walks by or a bit of pressure is put on the table. This is the type of risk you are not going to want to take when it comes to an expensive TV.

By having the TV centered, you are going to ensure it is appropriately balanced on the stand at all times.

This includes having it centered from all sides.

Don’t forget to center the TV by depth as well. There are two measurements that need to be taken and both should be centered before you place the TV on the stand.

Final Thoughts

Should a TV overhang the stand?

A TV can overhang the stand by 3 inches. This is enough for the TV to remain stable on the stand without compromising either fixture. Anything more than this can increase the risk of the TV toppling over and damaging everything.

It’s generally recommended to invest in a compatible TV stand for a new purchase. This is the only way to make sure you are buying a TV stand that is not undersized and is going to work well for the TV you’ve purchased.

Look into this when it’s time to use a TV stand at home.

Read More On Living Rooms:

  1. How To Place TV’s Electronics Near A Fireplace
  2. How To Set Up TV In A Room With A Big Bay Window
  3. How To Adjust A TV In Room With Loads Of Windows
  4. Should TV Be Bigger Than The Stand?
  5. How To Place Floor Lamp Beside A TV

3 Reasons Furnace Pilot Light Won’t Stay Lit After Replacing Thermocouple (Helpful Tips!)

furnace pilot light won't stay lit after replacing thermocouple

A functional furnace often slips into the background when it comes to efficiency, safety, and overall performance.

Unfortunately, it’s normal for problems to arise with the furnace pilot light. This includes the pilot light not staying lit after replacing the thermocouple.

A furnace pilot light won’t stay lit after replacing the thermocouple because the pilot burner is unclean or the gas valve has a bad magnet. It’s recommended to clean the pilot burner using a wide bristled brush to remove debris. If the gas valve has gone, it’s best to call a specialist to replace the gas valve.

It’s essential to avoid a situation where the furnace pilot light doesn’t work because the thermocouple was replaced.

If this issue pops up, it is best to look at a solution that is straight to the point and will bring the furnace pilot light back to life as necessary.

Here is a look at why a furnace pilot light won’t stay lit and what to do about it moving forward.

Best Brush For Cleaning Furnace (EDITOR’S CHOICE)

OXO Good Grips Deep Clean Brush Set
  • Set includes: Large brush and small brush with wiper blade
  • Large brush is great for grout, shower door tracks, stove tops and more
  • Small brush is perfect for fixtures and other tight spaces

Last update on 2021-09-13 / Affiliate links / Images from Amazon Product Advertising API

Why Furnace Pilot Light Won’t Stay Lit

1. Unclean Pilot Burner

The most common issue has to do with a malfunctioning pilot burner.

A lot of people don’t realize how much debris can accumulate within and around the pilot burner. If it is impeded in any manner, this can take away from how the pilot burner performs.

If the pilot burner is not functioning as it is supposed to, this will make it difficult for the pilot light to stay lit. Instead, the pilot light is not going to turn on and it will become difficult for it to remain useful.

In a situation such as this, you will want to clean the furnace’s pilot burner.

To clean a furnace’s pilot burner properly, it’s essential to use a wide-bristled brush. You are going to take the brush and begin to work around the pilot burner to remove the debris.

You will have to remove the pilot burner while doing this to reach into the orifice. This will ensure you remove all of the debris and it works out as you planned.

furnace pilot light won't stay lit after replacing thermocouple

2. Gas Valve Has Bad Magnet

This is a more complex issue and one that can happen from time to time.

In some cases, the furnace’s gas valve is going to start malfunctioning. When this occurs, it’s common for the gas valve to not work because the magnet won’t stay open. This means it continues to press against the gas valve keeping it locked.

The real issue is the new thermocouple is supposed to hold that magnet open when the furnace is working properly. If it doesn’t, the gas valve won’t work and it will go bad.

The goal is to either re-install the thermocouple or look at replacing the gas valve depending on where the issue is.

You should not be doing this as a DIY project.

It’s better to have a certified specialist come in and take a look at the gas valve and thermocouple. This will ensure the right connection is in place and the component doesn’t break down later on. A specialist will know what to look for and is going to help replace the component immediately.

furnace pilot light won't stay lit after replacing thermocouple

3. Incorrect Installation

This can happen if you install it on your own.

When the thermocouple is installed incorrectly, it’s possible the furnace will stop working. This can be something as simple as the connection not being stable.

You should take the time to test where the thermocouple has gone and how it is linked to the furnace. If the link is not secure, this means changes have to be made as soon as possible.

You can do it on your own again or have a specialist handle it.

This will ensure the problem goes away and the gas valve becomes to function again.

Final Thoughts

These are the reasons a furnace pilot light won’t stay lit after the thermocouple has been replaced.

A furnace pilot light won’t stay lit after the thermocouple because the pilot burner is unclean or the gas valve is not activating. This occurs because the thermocouple doesn’t hold the magnet open allowing for the gas valve to work. It’s best to clean the pilot burner using a wide-bristled brush and change the gas valve.

This will ensure the furnace pilot light works the way it is supposed to.

It’s essential to go through this information to make sure the right measures are taken moving forward. This includes how the furnace pilot light is activated.

You have to make sure the furnace pilot light stays lit.

Read More On Living Rooms:

  1. What is the Right Size For Pilot Light?
  2. Will Gas Flow If Pilot LIght Goes Out?
  3. How To Set Up Room With Only Mirrors
  4. Keeping TV Safe From Warmth Of A Fireplace
  5. Reasons For Clicking Wall