When it comes to applying caulk and securing the bathtub or any other part of the home, it’s important to make sure you are keeping it clean.
This doesn’t always happen and mistakes can be made if you are not careful.
One of those mistakes can end up involving dust sticking to caulk and not coming off easily. Just wiping it is not going to be enough and that is what frustrates people in this type of situation.
If dust is sticking to the caulk, the best place to start is by flushing it with water. Next, apply baking soda to the caulk, wait 10 minutes, and scrub using a cloth. Once done, paint the caulk for long-term protection.
These tips will go a long way in making sure the dust is removed from the caulk as soon as you notice it.
It’s important to note that you will need to be diligent during the process and make sure to apply baking soda evenly.
This guide will take a look at how to remove dust sticking to caulk.
Table of Contents
Best Caulk For Bathtub (EDITOR’S CHOICE)
No products found.
How To Remove Dust Sticking To Caulk
1. Flush With Water
Dealing with caulk that doesn’t attract dust is easier said than done.
Most types of caulks will have this issue during the curing phase and it’s important to be aware of this when finding the right solution.
Water is a good way to get rid of loose dust on the caulk.
This dust will not stick for long and just using water is going to be enough to get it out of the way.
Once done, you can then begin to look at the rest of the caulk to see what has to be done to clean it.
If the dust has been there for a long time, it is not going to come off easily. You will want to use a direct stream of water to clean it.
Be careful while doing this to ensure you don’t damage anything nearby.
2. Apply Baking Soda
When figuring out how to stop dust from sticking to silicone sealants, it’s important to know what can be done to clean dust from the surface.
To do this, you are going to need a cleaning agent.
In general, this is going to involve something as consistent as baking soda. Baking soda works well when it comes to removing the dust that settles on the surface and will ensure it goes away as soon as you want it to.
When you are applying baking soda to the caulk, let it sit for at least 10 minutes. This will loosen the dust.
3. Scrub The Surface
When figuring out how to remove dust from silicone caulking, you will want to have a good cloth in hand.
This is going to be used to scrub the caulk.
If you want to get the loose dust off, you will need to make sure the cloth is clean. This cloth will provide enough friction to let the baking soda work its magic.
Be thorough when scrubbing and make sure to get the edges.
This is how you are going to get the results you want and the dust will be gone from the caulk as soon as possible.
4. Paint The Caulk
The last detail to think about is going to be the long-term strategy for this process.
You don’t want dust to become an issue again later.
If that is the case, it’s time to think about painting the caulk. You can ensure the caulk has a layer of protection as that is going to go a long way in providing peace of mind.
You will just need one coat of paint on top of the caulk to ensure it is protected.
The dust will not settle or stick on top of the painted layer, which ensures the caulk is protected. This is what matters the most and has to be a top priority for you.
Final Thoughts
It’s important to look into this strategy when it comes to dust sticking to caulk.
If dust is sticking to the caulk, the first step is to rinse it with water to get rid of loose dust. Next, apply baking soda and let it settle for 10 minutes. Once the wait is over, scrub the surface using a cloth and then paint the caulk for long-term protection.
This is how you are going to get rid of the dust on the caulk and also ensure it does not stick in the future too.
It’s the ultimate short and long-term method for protecting the caulk that you have applied to that part of the house.
Read More On Bathrooms: