What Causes Electric Shock From Water Pipes? (Solved)

Most people do not connect water pipes with electricity.

You will naturally assume touching a water pipe is not going to shock you. However, it is possible for this to happen depending on the layout of the plumbing.

This is why it’s best to ask, what causes an electric shock from water pipes?

Electric shocks from water pipes are caused due to an active wire touching the metal pipe from a nearby appliance. This is highly dangerous and should be resolved immediately. To fix the issue, turn off the power supply, find the offending wire, and relocate it right away.

Do not make contact with the water pipe until this has been resolved. It can lead to catastrophic injury.

If you are unsure about where the active wire is, please take the time to consult with a professional as soon as possible.

This guide is going to let you know more about what to do if you notice an electric shock from water pipes in the home.

Best Freeze Protection Cable (EDITOR’S CHOICE)

EasyHeat 2302 Freeze Free Heating Cable - 300'
  • Self-regulating pipe heating system
  • Provides flexible protection against pipe freeze-ups in even the most challenging applications
  • Reduces power consumption when the pipe does not require freeze protection

Last update on 2022-09-19 / Affiliate links / Images from Amazon Product Advertising API

How To Prevent Electric Shock From Water Pipe

1. Turn Off The Main Power

Getting shocked by a water pipe is the last thing on your mind.

However, the metal pipe will easily pass electricity if it makes contact with an active wire. If you notice sparking near the pipe, do not touch the pipe.

This is dangerous.

You will want to start by turning off the main power supply in the house. This is going to ensure power does not run through the active wire as you look to find where it is and fix it.

It’s natural to want to go and fix the wire as soon as possible.

However, turning off the main power supply at the breaker panel is a must. It is the only way you can do this safely without compromising your health.

2. Locate The Active Wire

When you are ready with the power off, it’s time to find the offending active wire.

This wire is likely going to be near a pipe, which means it is going to be attached to an appliance. It is common for this to happen due to how pipes are set up in connection to appliances such as dishwashers and washing machines.

These appliances require both the water pipe and the electrical connection.

This is not a good combination when there is an active wire loose from behind the appliance.

This is the first place you are going to want to look when it comes to an active wire touching the water pipe.

3. Relocate The Wire

When you have found the active wire, it’s time to fix the issue.

You are going to do this by finding out why the active wire is touching the metal pipe. This might be due to how the appliance was installed but it can also be due to the wire coming loose.

If it is loose, you will want to tighten the wire and make sure it is set to the side. This is a must or it will touch the metal pipe again.

If this does not work, replace the wire.

You will also want to make sure the pipe is not in the way. In some situations, you might have to relocate the pipe as it is sitting too close to the appliance or the electrical connections.

4. Consult With A Professional (If Necessary)

This is one of the most important tips to think about.

If you feel like there is an active wire that’s hard to reach, it is important to consult with a professional.

They will know what to do about the wiring.

This is far better than attempting to do it on your own without knowing where the active wire is.

While this can be done as a DIY project, it is still best to let a professional handle it.

Final Thoughts

These are the things to focus on if you notice an electric shock from water pipes.

An electric shock from water pipes can happen when there is an active wire touching the metal pipe. To fix the issue, turn off the main power, find the active wire, relocate the wire, and then re-test the power.

This is how you are going to make sure the active wire does not touch the pipe when the appliance is on.

In most situations, this problem arises when an appliance has not been set up the right way. It causes the wire to come loose and touch the pipe.

If you feel like it is hard to find where the active wire is, please take the time to consult with a professional as soon as you can.

Read More On Bathrooms:

  1. Does Alcohol Thaw Pipe?
  2. Can A Toilet Flange Fit In The Pipe?
  3. How To Tighten A Loose Toilet Pipe
  4. How To Take Out Standing Water In Drain Pipe
  5. How Low Can The Temperature Be To Avoid A Frozen Pipe?