The shipping bolts are designed to make transporting a Samsung washer easier.
They do serve a purpose and it’s common for manufacturers to use them as a way to stabilize the machine.
While they are effective for the purpose they are made for, this does not mean you want to be aloof and keep them in place. They can do a significant amount of damage if you don’t remove the shipping bolts on a Samsung washing machine.
They will rip parts of the machine, cause it to shake, and make considerable noise too.
This is why you will want to figure out what to do if you forgot to remove the shipping bolts on your Samsung washer.
If you forgot to remove the shipping bolts on your Samsung washer, locate the bolts on the back. Next, unscrew the bolts, check each component attached to them, and then reset the washer.
It will not take long to do this and it will ensure the washing machine works as it is designed to.
A lot of people don’t know about these shipping bolts and often worry about the sound their new washer is making.
Here is a breakdown of what you need to do when removing shipping bolts on a washer.
Table of Contents
Best Washing Detergent (EDITOR’S CHOICE)
No products found.
Steps To Remove Shipping Bolts On Samsung Washer
1. Locate The Four Shipping Bolts
The first step is to know where the shipping bolts are.
They are going to be located on the back of the Samsung washing machine. You will notice them as they are sizable.
They will be located in the middle of the washing machine’s back and will be spread evenly.
The idea is to secure the components and make sure the washing machine can be transported from point A to point B.
While they do work well, you will still want to get rid of them by knowing where they are.
2. Unscrew The Bolts
Now, you are going to know where the shipping bolts on a Samsung washer are located.
This is a good thing to know.
When you are aware of their location, you are going to need to unscrew each bolt. You will want to find a wrench that is going to let you work on the bolts one by one.
Be thorough and make sure you don’t ruin the thread on the bolt. This will make it much harder to take off during the process.
Find the right-sized wrench and then begin working on the bolt.
3. Check The Samsung Washer For Damage
When the shipping bolts are off the washing machine, it is still important to see whether or not damage has been done.
As mentioned before, it is possible for the machine to get damaged if you are not careful about your approach.
You could have a situation where the washer gets damaged and it begins to make noise a lot.
If that is the case, this is the time to see where the damaged components are and how to replace them.
You can do both things at the same time and make sure the machine is ready to go as soon as you put it back into place.
4. Reset The Samsung Washer
You will need to think about how the Samsung washer is set up.
A lot of people don’t know what to do and that is what holds them back. You will want to make sure you are resetting the washing machine with a purpose.
This means you are going to ensure it is hooked up the right way and is not going to budge once it is in place.
Taking out the shipping bolts might cause you to adjust how the machine is set up. This is a good thing as you will want to go over these details once more.
Final Thoughts
Look into the steps mentioned here if you forgot to remove the shipping bolts on your Samsung washer.
If you forgot to remove the shipping bolts on your Samsung washer, look to find the four shipping bolts on the back, unscrew them, and then reset the washer into place. You can also take the time to inspect the washing machine for potential damage.
If you picked up on this issue right away, you are going to be good to go.
If you are not aware of what is happening, it is not going to work out as planned. This is when the damage will worsen with time and you are not going to stay on top of things as you were hoping to.
Always look into this and make sure the Samsung washing machine is used properly.
Here’s More On Homes: