The flame is often a wonderful indicator of how well-maintained a gas stove is. If it starts acting out, this is a sign something is wrong.
You might not see it right now, but the gas stove will give out unless the situation is resolved.
One of those signs can come when a gas stove flame goes out.
If the gas stove flame goes out, this means the gas valve is partially or completely blocked. To fix the issue, turn off the gas line, access the gas valve, and check for any type of blockage. If there’s a blockage, remove it using a paper clip.
It’s also possible for other issues to cause the gas stove flame to go out. This can include the burner not being functional and needing to be replaced.
Take the time to inspect the burner to see whether or not it is structurally sound. You will notice this as soon as you begin assessing the burner from end to end.
This guide will take a look at how to fix a gas stove flame that goes out.
Table of Contents
Best CO2 Detector (EDITOR’S CHOICE)
No products found.
How To Fix Gas Stove Flame That Goes Out
1. Turn Off Gas Line
If the gas stove burner is not working properly, you will have to figure out what’s the issue between the gas line and the part itself.
Several linking factors can be attributed to the issue.
In general, you will want to start by turning off the gas line to the stove. This ensures you can work on the burner and its connectors without compromising your safety. Do not attempt to fix anything with the gas still coming through to the stove.
This is dangerous and can lead to serious injury.
Just turn off the gas valve, make sure it is not releasing gas, and then begin looking at the burner.
2. Inspect The Gas Valve For Blockage
In this case, you will want to have an eye on the gas valve near the burner.
This is responsible for pushing gas to the burner. If it is not functional, the most common issue has to do with debris inside the valve.
You will have to find a way to remove this debris in the gas valve to ensure it works the way it is engineered to.
You will notice debris lodged in the valve.
This debris might partially or completely block the gas that is coming through to the burner. As a result, the gas stove flame will go out randomly.
3. Remove The Blockage
When you notice there’s a blockage in the gas valve, it’s important to find a way to remove it safely.
To do this, you are going to want something small and sharp such as a paper clip.
This will be sharp enough to dislodge the debris that is present near the burner. Just work away at the debris using the paper clip or whatever sharp object that is in your hand at the time.
It will not take long for the debris to come out. Once it does, the gas will go through uninterrupted ensuring it works the way you want it to.
4. Check The Burner
If the gas stove flame keeps going out, you have to look at the burner itself.
There are times the burner can get damaged due to natural wear and tear. When this occurs, you can’t have a situation where the burner is allowed to run in its current state.
The burner will blow out and that can also lead to additional damage to the gas stove.
The better option is to either repair the burner or replace it.
5. Test The Stove
When you have looked at the gas stove, removed the debris, and also assessed the burner, it’s time to test the stove again.
You will want to see whether or not the gas stove flame stays on now.
Final Thoughts
These are the reasons your gas stove flame goes out.
If a gas stove flame goes out randomly, this is a sign there’s some type of blockage in the gas valve or burner. To fix the issue, turn off the gas line to the stove, access the gas valve, and remove any debris that’s lodged inside using a paper clip or sharp object. This will help clear the valve and let the gas go through.
You have to be careful while doing this. Removing all of the debris is a must for the gas stove flame to remain on.
Read More On Kitchens: