Using a caulking tube is normal and it’s something the average person is going to deal with while handling a project at home.
You will want to apply caulk safely and smoothly, which a caulking tube will help with. However, you might face a situation where there is dried caulk in the tube.
If that is a problem you are dealing with, it’s time to learn how to get dried caulk out of the tube.
To get dried caulk out of a tube, start by taking a sharp tool and cutting the front of the tube by a few centimeters. Once done, scrape out the dried caulk near the edge. This should open up the tube. If the caulk is still dry, warm it with a hairdryer for a few seconds and try again.
For the most part, the dried caulk will come out as soon as you cut the tube with a sharp tool.
This can happen when you have let the caulking tube sit for a long time. It will dry up. This is why you want to make sure it is kept in a safe spot.
This article is going to take a look at how to get dried caulk out of a tube.
Table of Contents
Best Caulk Removal Kit (EDITOR’S CHOICE)
No products found.
Tips On How To Get Dried Caulk Out Of Tube
1. Cut The Tube Near The Front
When trying to get caulk out of a tube, you will need to understand the reason it is restricted in the first place.
The main issue has to do with the front of the tube.
This is often exposed to the environment more than the rest of the caulk. As a result, it starts to dry right at the tip of the tube.
This is why the best option is to take a sharp tool and cut the tip of the tube. Just a few centimeters will get the job done.
Once you do this, you are going to notice dried caulk right at the tip.
2. Scrape Out The Dried Caulk
Once you see the dried caulk, it’s time to get down to work.
You are going to take a sharp tool and begin scraping off the dried caulk. In some cases, it won’t be a lot and it should come out easily.
In other situations, you are going to need to push the sharp tool into the dried caulk to break it up. Once you do this, you can begin to scrape it out.
3. Squeeze The Tube To Release Caulk
When you feel the dried caulk near the tip is out of the way, it’s time to move on to the next step.
Here you are going to want to begin squeezing the tube near the edge.
The goal is to get some of the caulk out. This will take a bit of time but you have to keep pressing until it begins to move inside.
The reason for doing this is to see how much of the remaining caulk is dry. If it is still in good shape, it will move freely.
If not, you have to look at hopping over to the next step in this guide.
4. Warm The Caulk Using A Hairdryer If Still Dry
This step is reserved for situations where the dried caulk is deep inside the tube and has to be removed without the use of a sharp tool.
How will you go about doing this?
You need to warm the tube.
To do this, you will want to use a hairdryer as a direct way to target the tube with warmth. This will only be done for a few seconds.
Anything more might ruin the caulk that is inside the tube.
After the tube is warmed, it will loosen the dried caulk allowing it to move inside the tube as you want it to.
These are the most important tips on how to get dried caulk out of a tube.
To get dried caulk out of a tube, start by cutting the tip with a sharp tool. Once done, use the same tool to scrape out the dried caulk near the edge and squeeze the tube to take out the caulk. If it does not come out, warm the tube using a hairdryer for a few seconds to loosen it up.
This will take care of the issue and make it easier to get the dried caulk out of the tube as soon as possible.
In most situations, just cutting the tip of the tube will be more than enough. Be patient and make sure to not damage the rest of the tube while cutting.
Just a few centimeters is going to suffice.
Read More On Bathrooms: