How To Install Shower Curtain Rod Into Ceramic Tile Without Drilling (Simple)

Ceramic tiles are common in a modern bathroom.

This material comes along with a set of challenges when it comes to how a curtain rod is set up. If it is not in the right spot, this can do a lot of damage to the tiling and also cause it to fall.

As a result, you will want to learn how to install a shower curtain rod into ceramic tile without drilling.

To install a shower curtain rod into ceramic tile without drilling, start by taking apart the shower rod. With two rods in hand, turn the spring side around and put it into the hole on the other side. Now, place the suction cups on both ends and this will create a firm hold when installed on the tile.

The idea of the spring is to create a robust hold and will not budge. This doesn’t happen unless the shower curtain rod is taken apart and the sides are swapped.

Take your time with this step and make sure the shower curtain rod is installed in a straight line.

By doing this, you are going to get a strong hold and it will look the way you want it to.

Best Fabric Shower Liner (EDITOR’S CHOICE)

Sale
Amazer White Shower Curtain Liner Washable, 72 x 72 Inches,...
  • Size: Width: 72 inches, Height/Length: 72 inches - Amazer shower curtain liner features 120 grams per square meter (Gsm) and...
  • Waterproof shower curtain and liner 2-in-1: There is a water-proof coating on the surface of our shower curtain liner, which...
  • 2 heavy duty clear stones: Heavy duty clear stones on bottom corners make the fabric shower liner get the weight to stay in...

Last update on 2023-01-27 / Affiliate links / Images from Amazon Product Advertising API

Steps On How To Install Shower Curtain Rod Into Ceramic Tile Without Drilling

1. Take Apart The Shower Rod

Getting a shower rod to stick to ceramic tiles takes time.

You can’t have a situation where the traditional setup is used with the suction cups being on their regular ends (as packaged).

The reason has to do with the slippery tiles.

This is why you will need to start by taking apart the shower curtain rod.

What you are looking for is a spring on the inside of the shower curtain rod. This is what allows the shower curtain rod to hold into place once it’s on the wall.

how to install shower curtain rod into ceramic tile without drilling

2. Put Spring Side Of The Rod Into The Other Hole

Once you find the spring, you are going to flip this half of the rod to the opposite end.

Now, you are going to put the non-spring side into the hole. This will become the middle of the shower curtain rod.

Why are you doing this?

It has to do with using the spring where the suction cup is going to be. It will allow the shower curtain rod to have an additional force pushing out into the ceramic tile once it’s set up.

This is the alternative to drilling a shower curtain rod into the ceramic tile.

3. Place The Suction Cups On Both Sides

Take the suction cups and put them on both ends of the adjusted shower curtain rod.

The suction cups should go in easily.

You will want to make sure they are fully stabilized before putting the rod onto the ceramic tile. This will ensure it does not slip.

The suction cups should be straight when they are installed and you should test by pulling the shower curtain rod out to its maximum adjustable length.

The reason is to test whether or not the shower curtain rod is stable from the middle. You don’t want it falling when the curtain is installed.

how to install shower curtain rod into ceramic tile without drilling

4. Install The Shower Curtain Rod By Extending It

The last step is to install the shower curtain rod without drilling.

The suction cups are going to offer the type of hold you’re after. They will go onto the ceramic tile and the spring side will push outward.

This force is going to help hold the shower curtain rod between the two walls.

When doing this, you must make sure the shower curtain rod is kept in a straight line. It should not be uneven.

If it is uneven, the force being pushed out by the spring is going to go down or up. You want it going horizontally to maintain the hold on the ceramic surface.

Final Thoughts

These steps will work like a charm when learning how to install a shower curtain rod into ceramic tile without drilling.

To install a shower curtain rod into ceramic tile without drilling, start by taking the rod apart. Find the spring and switch that part of the rod to the other side. Put the two halves together and then install the suction cups on both ends. Once down, extend the shower rod and install it onto the ceramic tiles.

This should ensure the shower curtain rod does not budge once it is on the wall.

You will have to take a bit of time while doing this to ensure the rod remains in place.

Read More On Bathroom:

  1. How To Manage Shower Curtains
  2. Tips To Fix Uneven Subway Tile
  3. Do Waterproof Fabric Shower Curtains Exist?
  4. Would A Shower Door Or Curtain Offer Good Results In Small Bathrooms?
  5. How To Get Rid Of Red Stains In The Shower
  6. Contrasting A Fabric Shower Liner and PEVA Shower Liner
  7. Buying Between Fabric Shower Liner and Plastic Shower Liner