When it’s time to start mixing grout, it’s important to understand the intricacies of the process and what’s required for it to be perfect.
It’s common to make mistakes during a process such as this and it often doesn’t work out as a person wants it to.
This is when it becomes important to break down the process and recognize what works for the grout to be useful.
This includes learning how to mix a small amount of grout.
To mix a small amount of grout, use a mortar mixer or trowel. Use a bucket and maintain a 1:1 ratio (i.e. 1 cup of water for 1 cup of grout). Tilt the bucket at a 45-degree angle and then begin mixing.
If necessary, you can always add more water. It’s best to start with the indicated ratio to get the desired result you are after. When mixing a small amount of grout, you have to be careful during the process or it becomes inconsistent.
Here is a breakdown of how to mix a small amount of grout and what’s required to get it right the first time.
Table of Contents
Best Mortar Mixer For Grout (EDITOR’S CHOICE)
No products found.
Steps On How To Mix A Small Amount Of Grout
1. Use A Mortar Mixer Or Trowel
When it’s time to mix a small batch of grout, you will have to do it by hand.
Can you mix grout by hand?
Yes, you can mix grout by hand and it has to be done using a mortar mixer or a trowel depending on what’s available. This will create the perfect consistency and ensure the process works out as intended.
When doing this, you will want to collect all of the tools beforehand. This includes both a sizable bucket and a trowel or mortar mixer.
If you have a mortar mixer, this is going to make the process even easier.

2. Follow A 1:1 Ratio (Grout To Water)
You don’t want a situation where you are not following the required ratio.
This is doubly important when it comes to a smaller batch of grout. You will want to get the ratio spot on.
How do you go about doing this?
The ratio is 1:1 when it comes to water and grout. For every cup of water, you are going to need a cup of grout.
Maintain this ratio and you will see tremendous results even with a small amount of grout. If you need more water, you can always add it to the bucket later.
3. Tilt The Bucket At A 45-Degree Angle
You will now want to maintain the ratio and tilt the bucket at a 45-degree angle.
Why is this important?
The reason to tilt the bucket is to make sure the trowel or mortar mixer is getting through to the entire mixture.
This is the only way for it to work out as you want it to. Otherwise, the water and grout along the sides are not going to mix properly leaving an inconsistent finish.
Be diligent in tilting the bucket and getting everything mixed.
The more patient you are during this step, the easier it will be on you.

4. Sprinkle Water Using A Sponge For Consistency
You will want to sprinkle the water using a sponge for consistency.
This is a common mistake made by people when it comes to managing grout. You will want to continue to add a small amount of water throughout the process (if necessary).
This happens when you feel the grout is not mixing thoroughly.
To do this the right way, take a sponge and soak it in water. Once it’s soaked, gently squeeze the sponge into the bucket.
This will ensure you don’t end up putting in too much water at once. Continue to mix the grout while doing this.
Final Thoughts
This is how to mix a small amount of grout and get it right the first time around.
To mix a small amount of grout, use a mortar mixer or a trowel. Maintain a ratio of 1:1 while doing this (a cup of water for each cup of grout). Tilt the bucket at a 45-degree angle and then begin mixing. Add more water using a sponge if necessary.
This is the best way to mix a small batch of grout the right way.
While most people prepare for larger amounts, it is common to have to mix a small amount too.
This is why following the steps listed here will go a long way in making the grout as perfect as you want it to be.
Read More On Bathrooms: