How To White Wash Oak Cabinets At Home

Oak cabinets are beautiful to look at but it is common for them to start aging.

This is why you are going to want to be proactive and make sure you are prepping the cabinets and improving them as soon as possible.

Now, there are a few ways of doing this and it’s common for people to look at whitewashing oak cabinets because this will ensure they are aesthetically pleasing. Why not take advantage of something like this and see good results?

In this guide, we are going to showcase what it takes to start whitewashing oak cabinets at home and what to use to do so.

Steps For White Washing Oak Cabinets

The process is going to require a bit of planning and you are going to want to ensure things are done the right way.

Making mistakes along the way is something you are going to want to be careful of. This is a renovation project that is going to take a bit of time but it is going to offer amazing results once you are done!

We have taken the time to go through the steps that are required to bleach oak cabinets and ensure they turn out the way you want them to in this guide.

Remove The Cabinets

The first step in this process is going to be to remove the cabinets.

We feel this is the best way to make sure you have complete access to the surface on the cabinets and they can be handled with care. This is going to save you a lot of time and is the only way to go.

Removing the cabinets is the first step and then you are going to want to ensure you are aware of where each cabinet door goes. You can label them if you prefer.

It is common for people to get confused when it comes to the cabinets and where they go. This is why we recommend taking the time to either label the cabinets or make sure they are set up in an order that is easy to follow once it’s time to put them back.

Otherwise, they are going to be out of order and this is going to make it much harder than it needs to be during the last process.

Sanding

At this stage, you are now going to begin to work on the sanding process. You have to ensure the surface is as smooth as possible before the bleaching begins.

How are you going to sand the cabinets?

There are a few methods including using sandpaper. This is going to be up to you and how much time you are willing to spend on the process. You can use a palm sander as that is going to be effective.

Apply The Bleach

Is the surface in good condition now? Has it been sanded the way you want it to be?

Now, you are going to begin working on whitewashing the oak cabinets as required. This is going to include using bleach.

To do this, take out a paintbrush and then apply the bleach onto the cabinets. You are going to want to make sure this is done in a clean space. You can put sheets underneath.

It is best to do this outdoors as it can become hard to breathe if you are doing it indoors. If you are doing it indoors, open the windows.

You are also going to want to take the time to allow the bleach to dry on the cabinets. This is going to take a few hours and you are going to want to let it sit in the sun if possible.

Paint the Cabinets

At this point, you are going to be ready to paint the cabinets.

To do this, you are going to want to have the right cabinet paint ready to go. This is going to include making sure you are mixing the paint with water.

For the most part, you are going to want to have 25% paint and 75% water in the mixture to see appropriate results. Apply the paint and then let it sit.

You are going to want to make sure to let the paint dry. It should not be wet to the touch before you move the cabinet around.

This is one of the steps where you are going to want to take your time and pay attention to what is in front of you. Each situation is going to be different and that is going to include how the paint is being applied.

We would make sure everything is even before moving to the next step and/or letting the paint dry. If you require more paint, be willing to do so.

Some cabinets are going to require more paint than others. This is all about trial and error, which is a big factor in this project as a whole.

Clean The Cabinet And Seal It

The last step in the process is to clean the cabinet.

You are going to use a cloth to do this and make sure everything has been wiped as required. You should not have residue on the surface.

The reason you are going to do this is for the top coat.

The goal is to apply a layer of top coat to seal the paint.

When you are taking the time to seal the paint, you are going to want to ensure to let it dry too. This is going to take an hour or so.

Re-Install The Cabinets

Well, you have made it to the end of the project.

Now, you are going to want to put everything back to where it neds to go. This is going to include following the labels that you have put on the cabinets and ensuring they go back to where they need to be.

This is essential for doing things the right way.