Due to how bamboo cutting boards work, it’s common for specific issues to arise that might not with other types of wood.
One of the issues you might end up seeing has to do with mold.
When mold begins to spread on a cutting board, you are going to find it to be unusable. This is why finding a proactive solution is a must.
This includes learning how to remove mold on bamboo cutting boards.
To remove the mold on a bamboo cutting board, inspect the mold, soak a clean cloth in vinegar, place the cloth on the mold for 10 minutes, and then sprinkle baking soda on the mold.
This will loosen the mold and you can then wipe it away for good.
You will want to take your time doing this and being patient as the vinegar does its job is a must.
This article is going to take a look at how to remove mold on bamboo cutting boards the right way.
Best Cutting Board (EDITOR’S CHOICE)
No products found.
Steps On How To Remove Mold On Bamboo Cutting Board
1. Inspect The Mold
Before you begin using vinegar and/or baking soda to remove mold from a cutting board, it’s important to see how bad the situation is.
This is going to make sure you are not ignoring portions of the mold on the cutting board.
The goal is to do things the right way immediately.
Otherwise, all of your work is going to go to waste because the mold will spread again. Be thorough and make sure you are aware of where the mold is on the cutting board.
This will save you trouble later and ensure the cutting board is usable again.
2. Soak A Clean Cloth In Vinegar
How are you going to get rid of mold on a bamboo cutting board?
You are going to do this by taking pure vinegar and soaking a cloth in it. Make sure the cloth is clean before doing this.
You will want to soak the cloth in vinegar for at least 1-2 minutes. This will ensure it is drenched.
At this point, you will want to let it drip in a tray and then place the wet cloth on the mold. At this point, you will want to make sure it is pressed down on the bamboo cutting board.
This is how you are going to make sure it works.
3. Place The Cloth On The Mold For 10 Minutes
The waiting period is important.
You are going to need to place the clean cloth on the mold for at least 10 minutes. This is enough for the pure vinegar on the cloth to do its job.
The reason for using pure vinegar is to make sure it loosens the mold on the cutting board. If you are not giving it time to do so, it is not going to work.
For example, if you set it on the mold for 2-3 minutes, it might loosen portions of the mold and not others.
Is that what you want?
You will need to make sure to wait at least 10 minutes and then take off the soaked cloth.
4. Sprinkle Baking Soda On The Mold
When you remove the soaked cloth off of the mold on the cutting board, it’s time to see what has happened underneath.
If things worked out as planned, the mold is going to be looser.
This is a good setup for the baking soda portion of this process. You are going take a little bit of baking soda and begin sprinkling it on top of the mold.
This is going to further loosen the mold until it is easy to wipe away with a separate cloth.
How long should you wait for the baking soda?
You will want to wait at least 5 minutes for the baking soda to do its job.
Final Thoughts
These are the steps to look into as you hope to remove mold on bamboo cutting board.
If you want to remove mold on a bamboo cutting board, start by inspecting where the mold is, soak a clean cloth in pure vinegar, press the cloth on the mold for 10 minutes, and then sprinkle baking soda on the loosened mold. Once done, wipe away the mold for good.
This is a process that should take at least 15-20 minutes to complete from start to finish.
If you use the right type of vinegar, the mold is going to be easy to remove. The goal is to get it right the first time by being patient.
The more patient you are, the better your results will be.
Here’s More On Cutting Boards: