When you start noticing outlets around the house not working, it becomes imperative to get to the crux of the matter.
This can make it difficult to use appliances and/or connect devices to the circuit.
This becomes harder if multiple electrical outlets are not working with no GFCI.
If multiple electrical outlets are not working with no GFCI, this means the circuit is overloaded, one of the connections is loose, or the main breaker is blown. To fix the issue, shut off the power supply, reduce the load on the circuit, tighten all relevant connections and reset the breaker.
It is a lot easier to do this when all of the outlets are in the same area. This is likely linked to one part of the circuit and you can go to the breaker to reset it.
If the outlets are spread throughout the house, you are likely dealing with a loose connection in the breaker panel or you are overloading the home’s circuit.
This article will look at what your options are if multiple electrical outlets are not working with no GFCI.
Table of Contents
Best GFCI Extension Cord (EDITOR’S CHOICE)
No products found.
Steps To Fix Multiple Electrical Outlets Not Working With No GFCI
1. Shut Off The Power
If two or more outlets are not working, you are likely dealing with an issue surrounding how power is managed within the circuit.
This means it is best to observe the circuit by turning off the main power supply.
You will not want the power to be running through to the circuit until you figure out what is going on and how it needs to be resolved.
This is essential when it comes to doing things the right way.
Do not take a risk when it comes to how power is going to the malfunctiooffng outlets. Instead, turn of the power from the circuit breaker and then begin looking at the rest of the setup.
2. Reduce The Electrical Load
One of the more common issues people deal with has to do with the electrical load. The circuit might be overwhelmed by how much power is going through it.
For example, you might have multiple appliances and/or devices connected to these outlets on the same circuit.
Since the power is running through the same circuit, it does not matter how many outlets there are. If they are on the same circuit, the load is going to be extensive.
You will need to immediately reduce the electrical load.
Look at the devices you don’t need and move them to another part of the property. This is the only way to get the outlets to work again.
3. Tighten All Relevant Connections
You will also want to take a look at the connections.
To do this, you will want to start by figuring out which part of the house is not working as required.
Is it the kitchen? Is it the living room?
Find out the room and then go to the main breaker panel. You are going to want to turn off the power to this part of the house, remove the breaker tab, and then check the wiring behind it.
These are the wires that can become loose as time goes on. If they are loose, the outlets will not work.
You will have to tighten these wires immediately.
4. Reset The Breaker
When everything has been checked, it is now time to reset the breaker.
You are going to put the breaker tab back into place and turn it back to the on position. You will also want to turn the main breaker on if it has been shut off.
At this point, power is going to be running to those malfunctioning outlets.
You will want to go to each outlet and test it.
If they are working, the job is done. If not, you will want to reduce the load further and also take a look at each outlet to see if it has blown. You might need to change the wiring connecting to the outlet or the outlet itself.
Final Thoughts
These are the things to think about if multiple electrical outlets are not working with no GFCI.
If multiple electrical outlets are not working with no GFCI, the electrical load might be too high or one of the connections is loose. To fix the issue, shut off the main power supply, reduce the electrical load, remove the breaker tab on the main panel, tighten the connections, and reset the breaker.
This is the only way you are going to get power to go back to the outlets.
Read More On Outlets: