Rustoleum Spray Paint Won’t Spray! (Solved)

When it is time to start using the right type of spray paint, it’s important to find one that is going to work properly and will provide an even spread.

This is the only way to make sure you are not stuck with Rustoleum spray paint that won’t spray.

If the Rustoleum spray paint won’t spray, apply paint thinner to the top, wait a few minutes, use an air compressor to open the top, and clean out the tip with a thin wire.

This is the best way to make sure the spray paint does release the way you want it to and it does spread evenly.

If you are looking to use the Rustoleum spray paint, it’s best to look at the steps mentioned here to open up the tip.

Best Spray Paint (EDITOR’S CHOICE)

No products found.

Tips To Fix Rustoleum Spray Paint That Won’t Spray

1. Apply Paint Thinner To Soften The Top

The main issue is going to be the top.

This is where the paint won’t come out and it is likely blocked due to dried paint and/or debris. If this is the case, you won’t be able to pull out the debris as it won’t release as intended.

The better option is to make sure you are applying paint thinner to soften the top.

The paint thinner will do a good job of making sure the top is as clean as it needs to be. This is essential for those who want to make sure dried paint is not the reason for their problem.

What type of paint thinner is good for the task?

You can use any type of paint thinner as long as it can be applied evenly to the tip. You will not need a lot to get the job done.

Be patient when you are applying the paint thinner and make sure it spreads the way you need it to.

2. Let The Paint Thinner Settle

When you have applied the paint thinner, it’s time to start the waiting period.

The paint thinner needs time to do its job.

How long will this take?

It’s going to take at least a few minutes for the paint thinner to begin digging into the dried paint. You will notice it starts to bubble a bit when this is happening and it is a good sign the paint thinner is working as well as it should.

Take your time with this part of the process to ensure you do open up the tip.

3. Use Air Compressor To Open Up The Top

You are now going to know the paint thinner has done its job.

At this point, the paint is going to be loose at the top and it will be ready for you to work with a bit of air pressure.

What are you going to do to make this happen?

The goal is to take compressed air and then push it into the tip. This is going to allow you to blow out the dried paint after it has been loosened.

Remember that you will want to make sure to use the right type of compressed air. It needs to get into the spray paint can as that is how you are going to remove the dried paint efficiently.

4. Clean With A Thin Wire

You will now want to take the time to begin working out the dried paint.

The compressed air will have made sure you can dig into the tip of the spray paint can and loosen the debris that is still there.

The thin wire is going to let you push through and into the spray paint can. This is why you want to be meticulous while doing this to ensure it does not get damaged and you do get into the can as soon as you want to.

Final Thoughts

These are the factors that matter when you are fixing Rustoleum spray paint that won’t spray.

If the Rustoleum spray paint won’t spray, it is likely due to dried paint. To fix the issue, apply paint thinner to the tip, wait a few minutes, and then use compressed air to blow the dried paint out. To complete the job, take a thin wire and remove the dried paint from the tip.

This is how you are going to make sure the dried spray paint is out of the way before you begin spraying again.

It is recommended to test the spray paint on a separate surface after going through these steps to make sure it does work.

You don’t want it to ruin the surface you are supposed to spray paint.

Read More On Living Rooms:

  1. Reasons Spray Paint Is Gritty
  2. How To Choose Spray Paint For Chandelier
  3. How To Use Spray Paint For A Dresser
  4. How To Manage Spray Paint For Sherwin-Williams
  5. Why Is The Spray Paint Too Rough?