Samsung Washer Humming But Not Spinning! (Fixed)

When the Samsung washer is not running properly, you are going to want to focus on the sounds being made by the machine.

This can often be an indicator of what is unfolding inside the washer and what needs to be done about it.

One common issue you are going to see is with the Samsung washer humming but not spinning.

If the Samsung washer is humming but not spinning, this means carbon brushes are worn out. To fix the issue, unplug the washer, access the motor, inspect the carbon brushes, and replace them.

It is normal for this noise to get worse as the part breaks down further.

This is why you will want to be alert and make sure you are focusing on the humming and then fixing the issue at hand.

It’s the only way to make sure you don’t see the motor fall apart and/or stop working for good.

This article is going to pinpoint what needs to happen if the Samsung washer is humming but not spinning.

Best Foot Pads For Washer (EDITOR’S CHOICE)

COMFEE' Countertop Dishwasher, Portable Dishwasher with 5L...
  • [ No Installation Needed ]: Since your adding water manually in the 5L built-in water tank, you can put the countertop...
  • [ Ultra-Compact Design ]: The compact dishwasher can wash 30+ items (Max to 10" plates) at a time while occupying a small...
  • [ 6 Programs ]: NORMAL, RAPID, STEAM, FRUIT, GLASS washing programs, and AIR REFRESH extra drying mode meet all your daily...

Last update on 2023-01-27 / Affiliate links / Images from Amazon Product Advertising API

Steps To Follow For Samsung Washer Humming But Not Spinning

1. Unplug The Washer

Before you begin working on the carbon brushes in the Samsung washer, it’s important to stay as safe as you can.

To do this, you are going to want to cut the electrical source running into the washing machine as soon as possible.

This includes unplugging the washer.

You will want to do this because there is an electrical current running to the motor. When you begin working on the motor and its carbon brushes, you are going to expose yourself to this.

It is best to stay alert and make sure you don’t damage anything.

This is essential for those who want to make sure things are done the right way and nothing is left ignored during the process.

Once the power is off, you will then want to begin working on the motor.

2. Access The Motor

Now, it is time to start looking at the Samsung washer’s motor.

The motor is going to be set up near the back of the washer.

This means you will need to pull out the washer and then unscrew the back panel. This will reveal all of the major components inside the Samsung washing machine.

Be thorough when you are working on it and ensure you progress towards a solution that works well.

This is the only way to ensure you are gaining access to a motor that works and will yield positive results as time goes on.

3. Inspect The Carbon Brushes

Now that you have taken the time to access the motor, your interest has to go towards the carbon brushes.

These are responsible for the humming noise you have been hearing.

The goal is to check for damage and/or see whether or not the carbon brushes are loose. If they are, this might be the reason for the issues you are facing with the Samsung washer at home.

After you have taken the time to look at the carbon brushes, it’s time to make sure you are figuring out how to replace them.

4. Replace The Carbon Brushes

The goal is to take out the motor by unscrewing it.

Once the motor is out, you are now going to have complete access to the carbon brushes inside.

You will want to find compatible carbon brushes for the appliance and ensure they are replaced the right way.

A lot of mistakes can be made during this process, which is why you are going to want to be diligent about your approach.

When you are replacing the carbon brushes in a Samsung washer, it’s important to see where they are set in their current layout.

This is how the new carbon brushes need to be installed.

Be thorough and make sure you are focusing on taking the right approach over the long haul.

Final Thoughts

These are the tips that matter for the Samsung washer humming but not spinning.

If the Samsung washer is humming but not spinning, it’s likely due to the carbon brushes being damaged. The best strategy is to replace these brushes. Start by unplugging the washer, unscrewing the back panel, taking out the motor, and then replacing the carbon brushes with a compatible replacement.

This is the only way you are going to be sure the Samsung washer is not going to continue making noise.

When you are ready to go, it’s time to put the motor back and then test the setup.

If the carbon brushes were installed the right way, the humming should now be gone and the washer should work at 100%.

Read More On Kitchens:

  1. Reasons Washer Won’t Spin
  2. Reasons Washer Has Odd Spin
  3. Why Your Washer Has Too Much Water
  4. How To Wash My Jeans In A Washer
  5. How To Wash My Socks In A Washer