What To Do If The Sink Hole Is Too Small For Faucet? (Fixed)

You might be excited about replacing the old faucet with a new one at home.

This excitement can go down the drain when your sink hole is too small for the faucet. If that is the case, it becomes important to find a solution as soon as you can.

If a sink hole is too small for a faucet, this means it needs to be expanded. To do this safely, use a drill with a grinding bit to slowly increase the hole’s size. Do this evenly and make sure to measure everything ensuring the fit is seamless.

With older sinks, it is common for this to be a problem. Many experts state something as simple as a grinding bit will get the job done.

You don’t have to invest in a new sink to get the faucet to fit.

This article will explain what to look for if the sink hole is too small for a faucet.

Best Drill For Home (EDITOR’S CHOICE)

Sale
DEWALT 20V Max Cordless Drill / Driver Kit, Compact,...
  • Dewalt drill has compact and lightweight design that fits into tight areas
  • High performance motor of the power drill delivers 300 unit watts out (UWO) of power ability completing a wide range of...
  • High speed transmission of Dewalt 20V drill delivers 2 speeds (0-450 and 1,500 rpm) for a range of fastening and drilling...

Last update on 2022-05-19 / Affiliate links / Images from Amazon Product Advertising API

How To Fix A Sink Hole That’s Too Small For A Faucet

1. Measure The Required Hole Size

Drilling holes for a faucet is the easiest way to fix the problem.

You will want to do this with a measured approach. A lot of people don’t do this and that is what holds them back from getting appropriate results.

The idea is to start by measuring the existing sink hole.

How big is it right now? Now measure the faucet’s size to know what the sink hole needs to be.

This will let you know what the target size is for the sink hole. Drilling holes for faucets is all about these details and making sure you have the calculations in hand before you begin.

It’s also recommended to keep the faucet on hand to ensure you keep checking if the sink hole is big enough during the process. It will let you get things right.

sink hole too small for faucet

2. Set Up Grinding Bit On The Drill

If the sink hole is too small for a faucet, you will have to start grinding down the hole using a grinding bit.

The first step will be to set up your equipment.

You are going to need a high-powered drill such as the one recommended above. This will let you have enough power to grind away on the sink.

Set up a grinding bit that comes with the drill and make sure it’s on tight. This is going to help work along the edge of the sink hole to expand it.

Remember to be patient during this process for maximum results.

3. Grind The Edges Evenly Using Drill

You are now going to begin doing the leg work for this process.

The goal is to set up the grinding bit and then press along the edges. Make sure you are working in a circular motion to get a balanced finish.

What you don’t want to do is only work on one side of the sink hole. This can cause it to become uneven.

Work in a circle to ensure you are taking off the same amount from all sides.

This is key as you learn how to widen a sink hole at home.

sink hole too small for faucet

How Do I Make My Faucet Hole Bigger?

To make a faucet hole bigger, it’s recommended to use a drill with a grinding bit. Set up the grinding bit and run it along the edges of the sink hole. This will cause the sink hole to slowly expand from all sides.

Are All Faucet Holes The Same Size?

All faucet holes are not the same size. Each sink has a unique faucet hole and it’s important to increase or reduce its size depending on what your faucet requires. This is why measuring the sink hole and faucet is important.

Take your time with this process to get it right.

Since all faucet holes are not the same size, you will have to make customizations along the way. This is normal and is a part of installing a faucet on older sinks.

Final Thoughts

These are the tips to follow if you have a sink hole that’s too small for the faucet at home.

To fix a sink hole that is too small for a faucet, set up a drill with a grinding bit. Once the drill is set up, measure the required hole size for the faucet. Now grind along the edges of the sink hole using the drill and do it in a circular motion for an even finish.

This is important when looking to maximize the process and get it right.

Read More On Kitchens:

  1. Reasons Your Faucet Always Spins Around
  2. Choosing The Right Faucet For Stainless Steel Sink
  3. How To Take Off A Faucet In Seconds
  4. Reasons For Cloudy Water From Faucet
  5. Why Is Warm Water Coming From Cold Tap?
  6. Reasons Your Tap Water Is Foamy
  7. Why Is The Water Not Coming From My Faucet?