When you are looking at setting up a washing machine, you will want to ensure it is put in a safe spot.
This includes understanding how it will function when the plumbing is installed and everything is ready to go.
In general, you will also wonder about what is on top of the washing machine. This includes having a sink over a washing machine.
You can have a sink over a washing machine. It’s important to ensure the washer has a separate drain and water supply.
It is also recommended to make sure the washing machine is set up in a safe place where it is not going to be compromised by what is on top of the sink.
This article is going to look at the most important tips for installing a washing machine under a sink and what to think about during this process.
Table of Contents
Best Washing Machine Cover (EDITOR’S CHOICE)
No products found.
Tips To Install A Sink Over A Washing Machine
1. Maintain A Separate Drain
Putting a sink above a washing machine is easy to do.
It’s more important to think about where the drain is set up and how it is going to help remove wastewater from the washing machine.
A common mistake people make is to share the drain.
This is due to where the sink is located and how easy it is to share the drain. The reason you don’t want to do this is due to how much water is going to drain at a time. This can create a situation where the water gets backed up.
You might have a situation where the water refuses to go through. This will cause the water to keep flowing back into the washing machine drum and then sit at the bottom.
The same applies to water coming from the sink.
Gravity will push it down and this could cause it to enter the washing machine.
As a result, a separate drain is a must.
2. Separate Water Supply Is Key
Having a sink over a washer is easy to do as long as you are thinking about where the water is coming from.
The water supply needs to be separate from what is going into the sink.
If you attempt to share the after supply, you are going to have a situation where the water pressure is not good enough. This is going to take away from how well the washing machine washes over the long haul.
It’s best to make sure the water supply is separated from the sink.
Doing this is going to provide good results as time goes on.
3. Keep The Washing Machine Safe
Is the washing machine as safe as it needs to be?
A mistake people end up making has to do with the top of the washer not being protected from what is going on inside the sink.
This can cause damage to the washer and it will be hard to fix later.
As a result, you should be planning for this right away and make sure the washer is tucked under the sink rather than being exposed along the edge.
It should go in and stay there.
4. Protect From Water Damage
While a washing machine is designed to use water to wash clothes, it is not designed to withstand constant exposure to water from the outside.
This is why you will want to protect it.
This is not easy when there is a sink with water right above it. As a result, you will want to put a washing machine cover on the machine whenever you are not using it. This will keep it safe from splashes.
You will also want to ensure the electrical components are fully protected from moisture.
If you don’t do this, you are going to fry the machine and that is not easy to fix.
Final Thoughts
These tips are key when it is time to set up a sink over a washing machine at home.
You can have a sink over a washing machine. It’s important to make sure the washer has a separate drain and water supply to ensure it is consistent and effective. It is also recommended to keep the washer safe using a cover.
This is how you are going to ensure the water damage does not become an issue later. It will add up and that is not good for how the appliance ages.
As long as the washing machine is tucked under the sink and is not exposed, you are going to be good to go and it will play out as you want it to.
Here’s More On The Washing Machine: