I Spilled Water On Gas Stove And Now It's Clicking! (Helpful Tips!) -

Gas stoves are always going to be in the middle of everything. This is how you are going to prepare your meals and that means all sorts of ingredients will be tossed around from one end to the next.

This is why the idea of water around the gas stove can make you hesitate. You may even end up saying, “I spilled water on the gas stove and now it’s clicking!”

If you spill water on the gas stove and it starts clicking, this means the water is triggering the switch to keep clicking. Normally, a stove will only click three times. If it clicks more than this then the stove is waiting for the water to dry.

Unfortunately, letting a gas stove keep clicking is not a good idea. It can damage the underlying switch, which will then have to be repaired or replaced.

This article is going to take a look at what to do if you spill water on a gas stove and it keeps clicking.

Table of Contents

Best Cleaning Kit For Gas Stoves (EDITOR’S CHOICE)

No products found.

Tips On What To Do If You Spill Water On Gas Stove

1. Turn Off The Gas

When you spill water on a stove, it’s important to minimize the damage.

The clicking sound for a stove is normal but if it persists then you have a problem. Anything over three times is abnormal.

The goal as soon as you hear the sound is to turn off the gas. You don’t want it to keep running as this will instantly damage the switch inside the gas stove leading to significant damages. Make sure to turn off the gas and then work on the water.

You also don’t want to start cooking on the gas stove assuming it will be okay. This is dangerous especially if the water has gotten to the internal components.

Turn off the gas and go from there.

2. Dry The Surface Water

If you drop water on a gas stove, you will want to begin drying the noticeable water.

Anything sitting on the surface can be dried using a dry cloth. This is a simple option that is going to ensure the problem doesn’t worsen or additional components don’t get damaged. Keep an eye on this.

You will want to make sure all of the visible moisture is removed as soon as possible.

The longer you wait, the more dangerous it is going to get as the water continues to seep in. Take care of this problem and ensure as much of the water is removed as possible.

3. Open The Top and Let Stove Air Dry

When a gas stove clicks a lot, you will want to look at where the water has gone.

In most cases, the water will have gone deeper into the stove. This means you will need to open the top and begin to work on the internal components.

Don’t be aggressive during this step and make sure to let the gas stove air dry. When the top is open, this is not going to take a long time to do and it will work well.

Remember, the gas line should be off when you are working around the gas stove. Don’t forget to do this!

4. Don’t Cook For A Day

You will also want to avoid cooking for the day.

If you start using a gas stove when it is wet from the inside, the gas stove may break down. There are so many things that can go wrong and it is in your best interest to avoid cooking on the gas stove for at least 24 hours.

In general, you should be waiting longer but it depends on whether or not the clicking has stopped. If it has not stopped then you still can’t cook.

Final Thoughts

These tips will help when you spill water on a gas stove and it starts clicking.

If you drop water on a gas stove and it starts clicking, the best course of action is to turn off the gas. You will then dry the top surface using a cloth, let the internal components air dry, and avoid using the stove for at least 24 hours.

If you don’t do this, it is possible the gas stove will get damaged further and it will become difficult to repair it without paying a hefty bill.

It’s better to make sure you reduce the damage by letting the appliance air dry for a bit. This will help regain control of the problem.

Read More On Kitchens: