Why Is The Surge Protector Green Light Off? (Solved)

A surge protector is an important part of the electrical circuit and you need to ensure it’s fully functional at all times of the day.

This acts as a safety net for your electrical components including appliances and/or electronics. If you are not sure about how the surge protector is working, it’s time to understand its light indicators better.

One issue people mention is when the surge protector’s green light is off.

If the surge protector’s green light is off, this is due to the protective mechanism getting overloaded due to a surge. If still connected to the circuit, this fully exposes the connected electronics or appliances to damage.

If this happens, it’s best to unplug the surge protector and anything that is connected to the circuit as soon as possible.

You will also need to replace the surge protector when the green light is off. It is a clear-cut sign there is damage to the surge protector and it has to be swapped out after the electrical circuit is inspected in detail.

This guide will pinpoint what you have to do when the surge protector’s green light is off and what it means for anything that is connected to it.

Best Surge Protector (EDITOR’S CHOICE)

No products found.

Tips If The Surge Protector Green Light Is Off

1. Sign Of Overloading

If the surge protector’s green light is flickering or off, this means you have clear signs of overloading.

This is due to a sudden surge of electrical power that goes through the protector. While it will attempt to ward off this threat, it is likely compromised.

Each surge protector has a maximum capacity for how much it can tolerate. If this is overshot, it will lead to a situation where the green light goes off on the surge protector.

You will have to be mindful of this and immediately take action before one of your connected electronics or appliances gets damaged.

surge protector green light off

2. Unplug The Surge Protector

What are you going to do in a situation such as this?

You are going to begin with the simplest solution and that is to unplug the surge protector from the main electrical circuit.

There should be no power coursing through the surge protector when the green light is off.

The goal has to be to unplug the surge protector and make sure it is not further exposed to the electrical circuit. If you allow this to happen, it will get to the point where there is no appropriate protection in place for what is connected to the surge protector.

You should not be taking this type of risk due to how expensive electronics and/or appliances can be.

3. Replace The Surge Protector

Now, it is time to understand the reality of the situation you are in.

The electrical surge has caused your surge protector to die. This is why the green light is off when it should not be.

When the overloading has damaged the surge protector, you are going to have a situation such as this come up.

Your only option is to replace the surge protector once the electrical circuit has been repaired and/or assessed in greater detail.

When you are sure the circuit is in good shape, go out and buy a new surge protector for your home.

surge protector green light off

4. Test The Electrical Circuit

You will have to test the electrical circuit.

This is important as it helps ensure everything is safe and nothing has been damaged to the point of no return.

In some cases, the surge is just going to affect the protector. This is fine as it can be replaced for a reduced cost.

On the other hand, if there are other components such as wires that were damaged or even the main breaker panel, it’s important to speak to an electrician as soon as you can.

Final Thoughts

These are the reasons the surge protector’s green light is off at home.

If a surge protector’s green light is off, this means it has been compromised. The surge protector was likely overloaded with electrical current and is not dysfunctional or fried. The best solution is to unplug it and replace the surge protector immediately.

If you don’t replace the surge protector, it will not work as intended.

This is dangerous for your electronics and/or appliances that are connected to it. Make the swap and ensure your electrical circuit is running the way it is supposed to.

This is key as the surge protector is supposed to offer protection. If it does not, you are going to be fully compromised.

Read More About Circuits:

  1. Why Is There No Main Breaker in The Service Panel?
  2. Choosing Between Surge Protector And Power Strip With Breaker
  3. Advice To Prevent Buzzing From Circuit Breaker Under Load
  4. Why Is Power Going To Outlet But It Still Doesn’t Work?
  5. Tips For Choosing Between Outdoor & Indoor Breaker Boxes
  6. Causes Of A Fuse Box Producing Noise