How To Remove Mattress On Floor Mold (Solved)

There is nothing more frustrating than putting a mattress on the floor and realizing it is not lasting as long as you want it to.

Most people are going to assume this is due to the location of the mattress but it has more to do with how you protect it.

There is certain exposure that takes place when the mattress is on the floor and you have to be careful about how you manage it.

This includes learning how to remove mattress on floor mold.

To remove mattress on floor mold, start by propping the mattress against a wall for a few hours, wipe the surface, and make sure to use a strong cleaning agent to remove the mold already there.

The reason this happens has to do with moisture getting under there. This can do quite a bit of damage if you are not taking the time to air out the mattress on the floor.

Here is a detailed assessment of what you will need to do with mattress on floor mold and how to counteract it the right way.

Best Mattress Pad (EDITOR’S CHOICE)

No products found.

Tips On How To Remove Mattress On Floor Mold

1. Place The Mattress Upright Against A Wall

The main concern has to do with what is happening underneath the mattress.

When there is a mattress on the floor, it’s common for moisture to develop. This is due to where it is located and how it collects moisture from the environment it is in. Plus, you are going to be resting on it and this worsens the situation.

When a mattress is elevated, it airs out naturally.

This is not going to happen when the mattress is flush against the floor.

You will want to take the time to make sure to do this yourself. As a result, the best option is to put the mattress in an upright position against the wall.

2. Let It Air Out For A Few Hours

While the mattress is against the wall, you are going to want to let it air out.

If possible, you should be doing this every day to make sure it continues to air out when you are not using it.

While this might not always be possible, you should be looking to set a schedule for when the mattress is aired out.

This is the only way to not end up in a cycle where you continue to see mold under the mattress on the floor.

This is unsafe and making sure you air out the mattress is a must.

3. Use Strong Cleaning Agent To Remove The Existing Mold

What are you going to do about the mold that is under the mattress on the floor already?

You will need to get rid of it.

The best option to do this is going to involve a strong cleaning agent. You will want to apply this cleaner on the surface. It can be something like a strong mold remover to target the mold under the mattress.

This might take a bit of time to apply but it is worth it.

You don’t want a situation where the mold continues to spread. This is a health risk and it is not going to be good for the floor either.

4. Wipe The Surface

When you have taken the time to apply the commercial cleaner, it is time to think about getting rid of it safely.

The best option is to wipe the surface using a clean cloth.

You will want to make sure it has the time to settle and loosen the mold already in place. The cloth is going to make sure you can scrub it out and get rid of it for good.

It is best to take your time during this step and make sure you scrub vigorously. this is how you are going to make sure the mold is gone.

Final Thoughts

These are the details you will need to go over when removing mattress on floor mold.

To remove mattress on floor mold, start by standing the mattress upright against a nearby wall. Next, let it air out for a few hours and then apply a strong mold remover on the floor to get rid of the mold.

This is a must when you are hoping to keep the mold away from a mattress.

The moisture is going to get worse if you don’t take the time to air out the mattress. It should become a routine to do this or you are going to regret it later.

Here’s more on Beds:

  1. Is Mattress Pad Safe Over A Memory Foam Topper?
  2. Steps To Relocate A Double Mattress In A Car
  3. Can My Memory Foam Mattress Stay On Its Side For Long Hours?
  4. What Is Put Under A Mattress On The Floor?

Should You Have Drawer Pulls In The Middle Or Top? (Solved)

Setting up the drawer pulls can be essential to how it looks and functions.

If you don’t take the time to look into these details, you are going to end up with a malfunctioning or ineffective drawer that is never used.

As a result, you will want to compare drawer pulls in middle or top locations.

Drawer pulls in the middle are more balanced, easier to handle, and tend to distribute the weight better than drawer pulls at the top. It’s often recommended to go with drawer pulls at the top only if it’s a personal preference.

If you are looking at nothing more than efficiency, it’s best to stick to a drawer pull in the middle.

It will work well and is going to be easy to set up too.

Here is a look at how drawer pulls in the middle compare to those on top.

Best Bedroom Mirror (EDITOR’S CHOICE)

QiMH Vertical 47x22 Inch Wall Mounted LED Lighted Vanity...
  • PAIR MORE DECORATION - The mirror is designed in an aluminum frame that can be easily matched with many decorative figures....
  • WELL PACKAGE - Strong packing greatly reduces damage during transportation, we will provide a replacement or refund once you...
  • ENERGY SAVING - LED light source creates bright, energy-efficient illumination(output 25W), Their long-lasting LED provides a...

Last update on 2022-09-24 / Affiliate links / Images from Amazon Product Advertising API

Comparing Drawer Pulls In The Middle Vs. The Top

1. Aesthetics

Let’s begin with the basics.

You are going to notice the style of these drawer pulls before anything else. This includes where the drawer pulls are set up and how they look when comparing them to the rest of the setup.

This is why you will want to take a subjective look at what you are going with first.

In general, drawer pulls in the middle offer more balance aesthetically. This is due to them being set at the center point of the dresser drawer.

This is essential for those who want to make sure they are considering the nuances of going down this path and how it will look when the dresser is set in the room.

If you want to go with a balanced look then it is best to have the dresser pull in the center.

If you find the dresser pull at the top a better look then that is the direction you will want to go in. Aesthetics do play a role in a decision such as this.

2. Stability

Imagine pulling on a drawer and then realizing it is too heavy or does not seem to come out smoothly.

This is a legitimate concern and sometimes it has to do with how stable the drawer pull is.

In general, a drawer pull in the middle is going to be far more stable. This is due to the location and where it is set up as you pull on the drawer.

The sides are going to be equal, which means when you pull, it is not going to feel odd in your hand.

This does not apply to a drawer pull at the top.

You will notice the weight is going to be at the bottom and it will feel more cumbersome when there are items inside of it.

3. Durability

Thinking about the overall durability of the drawer pull also matters.

When you have a drawer pull at the top, it is going to be less durable. This is due to the amount of force needed to pull the drawer when you are opening it.

This is going to be down to how the weight is set up alongside the handle.

This is not the case when you are looking at a drawer pull in the middle.

It will be far more durable and that does matter to those who want to make sure it comes out smoothly.

4. Weight Distribution

When the weight distribution is not good, you will be unhappy with the results and this can be a legitimate concern with the wrong placement of drawer pulls.

You will want to look at how the drawer pull feels when you pull on it.

For the most part, the weight distribution is going to be a lot better when the drawer pull is in the middle.

The weight is going to be spread across the top and bottom of the pull.

This does not happen when the drawer pull is at the top.

Final Thoughts

Look into these details as you compare setting up the drawer pulls in the middle or top.

A drawer pull in the middle is going to be well-weighted, easier to pull, and easier to set up. In comparison, a drawer pull at the top is much harder to manage and can sometimes look odd.

However, you will only want to think about what works for you.

If you like the look of the drawer pull at the top then that is the direction you should go in. The aesthetics do matter and should be something you keep in mind.

Read More On Drawers:

  1. How To Put A Drawer Back Into Place
  2. How To Handle Drawer From A Desk
  3. How To Take Out A No Lever Drawer

Can You Move A Dresser With Clothes In It? (Answered)

Most people want to get a dresser from point A to point B as soon as possible.

It might be easy depending on how many clothes are inside the dresser. However, you might also want to take out the clothes and then move them.

If you are taking the clothes out then it is going to be much easier to get the dresser to where it needs to be. Of course, what if you want to learn how to move a dresser with clothes in it?

If you want to move a dresser with clothes in it, start by securing loose items inside first. Next, use lifting straps to pick the dresser, keep it straight, and then move it to where it needs to go.

You can move a dresser with clothes in it and this is an option many people think about when it is time to get the dresser to its new location immediately.

Do not rush this process because the dresser is going to be heavier in this state.

Let’s take a look at what you need to do as you learn how to move a dresser with clothes inside.

Best Bedroom Mirror (EDITOR’S CHOICE)

QiMH Vertical 47x22 Inch Wall Mounted LED Lighted Vanity...
  • PAIR MORE DECORATION - The mirror is designed in an aluminum frame that can be easily matched with many decorative figures....
  • WELL PACKAGE - Strong packing greatly reduces damage during transportation, we will provide a replacement or refund once you...
  • ENERGY SAVING - LED light source creates bright, energy-efficient illumination(output 25W), Their long-lasting LED provides a...

Last update on 2022-09-24 / Affiliate links / Images from Amazon Product Advertising API

How To Move A Dresser With Clothes In It

1. Secure The Loose Items First

Before doing anything, you are going to want to secure any loose items inside the dresser.

Some people are not just going to have clothes in the dresser.

This means you are going to want to be careful about what you are doing and how the items are set up in the dresser. This is going to allow you to freely move the dresser without worrying about damaging anything inside it.

This is common with jewelry and/or other fragile items that can get damaged during a move.

You will also want to think about placing softer items along the sides of each drawer to ensure the clothes don’t tear during the move.

2. Use Lifting Straps To Lift The Dresser

You will want to think about the biggest hurdle when it comes to moving a dresser with clothes inside.

The main issue is going to come in the form of weight.

Are you capable of lifting the weight of a dresser plus clothes? Is it going to be too heavy? Are the clothes spread out or in one drawer?

You will always want to spread out the clothes before moving the dresser. This is the only way to ensure you are not putting too much weight on one side as it is being moved.

The best option is to use lifting straps for this part of the process. It will make things easier for you.

3. Lift In A Straight Line

How are you going to move the dresser with the clothes in it?

You are going to want to think about how the dresser is being moved from point A to point B.

This includes whether or not you are tilting the dresser.

As a result, you will want to make sure the clothes are spread out inside the drawers. This is how you are going to ensure the weight is spread out and you can move the dresser in a straight line.

The goal is to always lift in a straight line to ensure you are not ruining anything and the dresser gets to sit in the same way as it is put in a new spot or on a transportation vehicle.

4. Take Your Time

This is important advice for something like this.

The idea is to make sure you are taking your time during the process.

A lot of people don’t take their time and that is a real point of concern.

You are going to want to make sure the dresser is not tilting as you are moving it and also ensure you are being as patient as you can be.

Final Thoughts

Can you move a dresser with clothes in it?

You can move a dresser with clothes in it. The goal is to make sure you are securing loose items (i.e. jewelry), using lifting straps to lift the dresser, and making sure it is lifted and moved in a straight line.

This is the only way you are going to keep the dresser and its contents safe.

If you rush, you are going to harm the dresser or it is going to feel too heavy. Be patient and make sure to use the right lifting straps.

This is how you are going to appreciate the process and you will not have to empty the dresser before moving it.

Read More On Mirrors:

  1. How To Put A Dresser Drawer Back In
  2. How To Pull A Drawer From Desk
  3. How To Pull A Drawer With No Lever
  4. How To Fix A Sagging Drawer

Can’t Get Dresser Drawer Back In! (Solved)

When it’s time to set the drawers into place, it’s not always as easy as it should be.

There might be something snagging on the drawer or not letting it line up the way you want it to.

This is when it becomes important to think about your options and figure out why you can’t get the dresser drawer back in.

If you can’t get the dresser drawer back in, start by lining up the drawer with the slide reel, next press the flange on the side of the dresser, and then slide the drawer into place. Once done, make sure it does not fall when you pull it out.

For the most part, people don’t press the flange on the side of the drawer, which causes it to not go in.

The flange is designed as a locking mechanism to hold the drawer into place when it is in the slide reel.

This guide is going to show you more on what to do as you look to get the dresser drawer back in.

Best Bedroom Mirror (EDITOR’S CHOICE)

QiMH Vertical 47x22 Inch Wall Mounted LED Lighted Vanity...
  • PAIR MORE DECORATION - The mirror is designed in an aluminum frame that can be easily matched with many decorative figures....
  • WELL PACKAGE - Strong packing greatly reduces damage during transportation, we will provide a replacement or refund once you...
  • ENERGY SAVING - LED light source creates bright, energy-efficient illumination(output 25W), Their long-lasting LED provides a...

Last update on 2022-09-24 / Affiliate links / Images from Amazon Product Advertising API

Tips On How To Get Dresser Drawer Back In

1. Line Up Drawer With The Slide Reel

The main issue people are going to have has to do with how they line up the dresser drawer with the slide reel.

There are two reels on the side, which are going to hold the dresser drawer once you push it into place.

If you don’t take the time to line up both sides equally, it is going to get stuck and will not move further.

This is why you will want to first line up one side and then the other to make sure both are ready to go before you push the dresser drawer further.

You will need to be careful during this step to make sure it does go in as you want it to.

2. Push In On The Flange On The Drawer

Now, you are going to look for the flange on the side of the dresser drawer.

This is a little tab that is going to be in the middle of the dresser’s side reel and it is the first detail you are going to want to look for.

The idea is to press this tab.

The tab is going to act as a lock when you slide it into place. Without pushing at the flange, you are not going to activate this locking mechanism.

You do not want to let go of the tab until it is in place within the dresser. Take your time with this step and make sure you do use the locking mechanism as it is supposed to be used.

3. Slide The Drawer Into Place

You will want to make sure to gently push the drawer into place.

A lot of people will aim to quickly rush the process and that will make it much harder to get it to go through.

In general, your goal has to be to slide the drawer into place just the way you have lined it up. This is how it is going to go into the slide reel the right way.

You will notice it is going to go in smoothly.

If it is not, continue to push on the flange and it will slide further.

4. Make Sure The Drawer Is Secure

Now, you are going to want to test the dresser drawer.

This means pulling at the drawer to see whether or not it comes out.

You don’t want a situation where the dresser drawer goes in but the locking mechanism doesn’t activate. This can happen when the flange on the side gets stuck and stops working properly.

You will want to test this by pulling at the dresser drawer to see if it comes out. If it keeps coming and then falls off the slide reel, this is a problem and you are going to want to tighten the flange.

Final Thoughts

I can’t get the dresser drawer back in!

If you can’t get the dresser drawer back in, the best strategy is to line up the drawer with the slide reel in the dresser, press the flange on the side of the drawer, and then push it in until the drawer locks into place.

You are going to have to look at how you are lining up the dresser drawer during this process.

It is the only way to make sure the dresser drawer does not fall out as soon as you push the flange in. This is a multi-step process, so you are going to want to pay attention to how the dresser drawer sits in the dresser.

Read More On Drawers:

  1. Steps To Take Out Drawer From Desk
  2. Steps To Take Out Drawer With No Lever
  3. How To Manage A Sagging Drawer

How To Bend Back A Metal Bed Frame (Explained)

When the metal bed frame’s middle support starts to give out, you are going to notice issues with its shape.

The bed frame is going to bend.

This is not a good sign and it is often a warning letting you know the bed frame is weakening and has to be fixed. If you don’t take the time to stabilize the metal bed frame, you are going to have serious issues on your hand to deal with.

This is when it becomes important to learn how to bend back a metal bed frame.

To bend back a metal bed frame, start by measuring the distance between the floor and the lowest point of the bent area. Next, cut plywood and/or metal into a leg to hold that part up. Once the right size is cut, drill into the metal bed frame to secure the leg into place.

When you are done installing the leg on a metal bed frame, it’s time to test it. You will want to see whether or not it can support your weight on that side of the frame.

If it does not, you might need to adjust the leg you are setting up or how many legs are installed.

Here is a look at how to bend back a metal bed frame.

Best Headboard (EDITOR’S CHOICE)

Sale
LUCID Mid-Rise Upholstered Headboard-Adjustable Height from...
  • Upholstered with linen inspired fabric, available in Charcoal, Stone, Cobalt, and Pearl color options
  • Frame is made of solid Siberian Larch wood for high quality construction
  • Headboard fits most bed frames or bases and comes with pre-drilled legs, modification plates, and optional wall mounts

Last update on 2022-09-21 / Affiliate links / Images from Amazon Product Advertising API

Steps On How To Bend Back A Metal Bed Frame

1. Measure Distance Between Floor And The Bent Frame

Before doing anything else, you will want to find out the gap between the floor and the bent part of the metal bed frame.

Why is this important?

It is important because you will want to know how big the new leg needs to be that will go to support the metal bed frame.

Until there is a leg there, it is going to stay bent. There is no other way to fix it.

This is why you want to take multiple measurements to get a good read on what your options are.

2. Cut A Metal or Wooden Leg

You will now want to find metal and/or plywood to help cut out a leg.

This is going to be a subjective call.

It is recommended to find a sturdy material that can hold up a specific amount of weight that will be put on the metal bed frame.

Some will want to use metal but others are going to be fine with strong plywood. It is best to consult with a home hardware specialist to find out what your options are.

Once you do this, you are going to take the measurements from before to begin cutting out the leg.

3. Drill Metal/Wooden Leg Into The Frame

When the leg is ready to go, it is time to drill into the bent part of the metal bed frame.

You are going to want to find the central point of this bent area.

This is where you are going to attach the new leg.

The goal is to prop up the bent part of the metal bed frame with the help of the leg. It is going to go right in the middle and push the bent area up.

4. Test The Bed Frame

When the leg is secured, it is time to test the metal bed frame.

A common mistake people make is to jump onto the bed as that is going to put undue stress on the frame instantly.

You need to test in smaller increments to see whether or not the bed frame makes noise. The goal is to also keep an eye on the leg to see if it moves and/or wilts under the weight.

If it does, you are going to have to tighten the screw you are using to hold it into place.

Final Thoughts

These are important tips as you learn how to bend back a metal bed frame.

To bend back a metal bed frame, it’s best to start by measuring the gap between the bent part of the frame and the floor. Next, cut a leg out of metal and/or plywood based on these measurements. Once the leg is ready, drill into the bent area and secure the leg into place.

At this point, the metal bed frame should be propped up and ready to go.

You will always want to test the bed frame to make sure it is as secure as it needs to be. This includes adding a bit of weight to the bent part of the frame to see how it holds up.

The more you test it, the better it is for the viability of the new change.

Here’s More On Bedrooms:

  1. Steps To Repair A Sagging Metal Bed Frame
  2. Steps To Improve A Headboard That Doesn’t Fit Bed Frame
  3. Assessing The Value Of A Footboard
  4. Should Your Headboard & Footboard Work With Adjustable Beds?
  5. Does A Metal Bunk Bed Fall Routinely?

How To Fix A Sagging Metal Bed Frame (Explained)

When you are working on a metal bed frame, you will assume it’s going to withstand regular stress and will work out as you want it to.

Yes, in most cases, the metal bed frame is going to last a long time and maintain its shape the way it is designed to.

However, you can have a situation where the metal bed frame begins to sag. This is when you need to learn how to fix a sagging metal bed frame.

To fix a sagging metal bed frame, it’s best to start by inspecting for loose bolts/nuts. Next, tighten these bolts and then add plywood underneath as support. You can also add a block underneath depending on what’s available. To complete the job, test the middle of the bed by putting weight on it.

A sagging metal bed frame can be fixed as long as you are taking the time to find the root cause.

This guide is going to highlight how to fix a sagging metal bed frame along with what to use to make sure it stays in the right position for a long time to come.

Best Headboard (EDITOR’S CHOICE)

Sale
LUCID Mid-Rise Upholstered Headboard-Adjustable Height from...
  • Upholstered with linen inspired fabric, available in Charcoal, Stone, Cobalt, and Pearl color options
  • Frame is made of solid Siberian Larch wood for high quality construction
  • Headboard fits most bed frames or bases and comes with pre-drilled legs, modification plates, and optional wall mounts

Last update on 2022-09-21 / Affiliate links / Images from Amazon Product Advertising API

Steps On How To Fix A Sagging Metal Bed Frame

1. Look For Loose Nuts Or Bolts

If a metal bed frame sags, it’s important to look for the most obvious issue.

This is going to come in the form of one of the nuts or bolts loosening. If you are regularly resting on a metal bed frame, it is going to start to weaken.

This happens over time and it is going to be hard to notice until the bed frame sags from one side.

In general, you will want to go to that side and look at the connecting points. This is going to highlight whether or not the issue has to do with a loose nut or bolt.

2. Tighten The Nuts And Bolts

You will now want to go to each nut or bolt in that area and tighten it.

The reason for doing this is to make sure a loose part is not the reason for the sagging metal bed frame. Only then will you be able to move forward to another part of the bed to see what can be done to fix it.

It is common for this to happen, so it should be a priority for you.

When you are tightening the loose bolts, you will want to make sure they are also holding the joint in place.

This means ensuring they are going through the hole and not just spinning in the same spot. This can happen when there is rusting in the metal bed frame or it is not as solid as it needs to be.

3. Place Plywood Underneath The Bed Frame

Let’s assume you have checked the loose bolts and they are good to go.

At this point, you might still have a sagging metal bed frame on your hands.

If that is the case, it is best to look to place something as a new base underneath the metal bed frame. This will have to come in the form of a piece of plywood.

The plywood is going to go near the sagging side and is going to prop it up.

4. Test The Bed Frame

You will want to put the plywood or block underneath the sagging area and then test it.

To test the metal bed frame, you will need to put weight on it. It is best to not jump on the bed frame as it might already be weak.

You will want to gradually add weight on top and see how the bed frame responds. If you notice it start to sag again, you might need to add another piece of plywood to the bottom of the bed frame.

The goal is to stabilize the bed frame and that is going to take a bit of time to do.

Final Thoughts

These are the main steps on how to fix a sagging metal bed frame.

To fix a sagging metal bed frame, it is best to start by tightening all of the loose bolts and/or nuts in the sagging area. Next, place a piece of plywood underneath and then re-test the bed frame to see if it still sags.

You will need to be patient when it comes to this part of the process.

It is common for your first fix to not work out as planned. This means you are going to have to keep solidifying the base as best as you can.

This can be done by being patient and making sure you are only focusing on the sagging part of the metal bed frame.

Here’s More On Bedrooms:

  1. Steps To Fix Bent Metal Bed Frame
  2. How To Fix Headboard That Doesn’t Fit Bed Frame
  3. Advantages And Disadvantages Of A Footboard
  4. Does An Existing Headboard & Footboard Sync With Adjustable Beds?
  5. Will My Metal Bunk Bed Fall Regularly?
  6. Does An Adjustable Base Fit Different Bed Frames?

Cheaper Alternative To California Closets (Answered)

California Closets has long been the gold standard for premium closets.

It offers refined designs, a wholesome customization process, and the type of detailing needed from a modern service provider.

While they do an exceptional job, it’s important to look at budget options on the open market. You will want to find a cheaper alternative to California Closets and there are a few that stand out.

A cheaper alternative to California Closets includes Closet World, Classy Closets, and Classy Factory. These are budget-friendly, efficient, and offer a long list of viable designs to choose from.

Your goal has to be to look at a closet provider that offers high-quality solutions made of top-tier materials. You should not be cutting corners when it comes to the materials used to put together the closets being sold to you.

With this in mind, it’s essential to dig deeper and find out more about the best cheaper alternative to California Closets.

Best Hanger For Closets (EDITOR’S CHOICE)

Sale
HOUSE DAY Black Magic Hangers Space Saving Clothes Hangers,...
  • Durable Closet Organizers and Storage - Made from durable plastics with ideal dimensions measuring at: 9.3" wide and 0.8"...
  • Newly Designed Easy To Use Magic Hangers - Each clothing hanger has 5 holes slots to prevent clothes from slipping and...
  • Space Saving Clothes Hangers - The scientific design of the closet organization makes full use of the space, saves 80% of the...

Last update on 2022-09-24 / Affiliate links / Images from Amazon Product Advertising API

Finding Cheaper Alternative To California Closets

1. Closet World

This is one of the better alternatives on the market right now.

They continuously put forward deals including free installation and discounted pricing. This is good for those who are simply wanting a premium finish without spending the extra money to get it.

While you might not get the level of customization as you would with California Closets, this is still a great provider.

They have been in the market for a long time and their selection is world-class. You are going to be impressed as soon as you take a look at what they have to offer.

A good thing about Closet World has to do with its well-rounded approach to designing. They understand space efficiency and that is important for those who want to make additional changes to their home.

Whether it has to do with a closet or a new home office, they will know how to personalize it to meet your needs and that is empowering.

2. Closet Factory

This is another alternative that has been around for years and is well-established as a premium closet provider.

The one thing people adore about Closet Factory is the good pricing without compromising on the consultation process. This is an essential phase when coming up with the right design for your needs.

A specialist will guide you during this process and they will be happy to do it through an in-home session too.

This is one of the benefits of going with this type of alternative.

You are going to adore their selection and it is a worthy competition when it comes to California Closets.

3. Classy Closets

The one thing about Classy Closets that stands out has to do with their willingness to work with you.

It is not common to find this on the open market.

You are looking at a provider that will take the time to work on the warranty and is also going to offer good monthly payment terms for you to sign up for.

This can make it easier to set up the closet at home and know you are not going to be blowing a huge chunk out of your budget.

This is what makes it a good cheaper alternative to California Closets.

4. Home Depot

Yes, this is an option you are going to keep in mind.

When you are scouring through the industry looking for the right type of closet, you should also take the time to think about Home Depot.

They have been around for a long time and are appreciated for their attention to detail. You are going to adore the work they put in and how it all comes together.

It is this competency that makes them one of the better options if all you are looking for is a robust solution.

They might not have the same selection or design process, but they do offer high-quality products for you to choose from.

Final Thoughts

Look at these options when finding a cheaper alternative to California Closets.

When it comes to finding a cheaper alternative to California Closets, the recommended options include Classy Closets, Closet World, Closet Factory, and Home Depot. These are renowned providers with quality materials, good customer service, and reasonable pricing.

The best thing you can do during this process is to compare what is out there.

This is going to let you learn more about your options and what needs to be done moving forward.

Don’t stick to one and do take the time to speak to each of them while going through their collection of designs.

Here’s More On Closets:

  1. Choosing Between California Closets And Closet America
  2. Buying From Elfa Or California Closets
  3. Analyzing Home Depot And Closets By Design
  4. Analyzing Closet World To California Closets
  5. What Does A Sliding Closet Door Need From A Baseboard?

Closet America Vs California Closets (Compared)

Premium closets have become a staple among homeowners and it’s essential to invest in solutions that are long-lasting.

When it comes to choosing well, there are a few closet companies that stand out more than others.

These include Closet America vs California Closets.

Closet America is renowned for its pricing, good customer service, and attention to detail. While California Closet uses robust materials, offers premium designs, and has a comprehensive consultation process.

When you are choosing between California Closets and Closet America, it will come down to the design you want and your budget.

It is important to consult with both to make sure you are getting a good lay of the land. This includes seeing all of the closet designs available to you as a customer.

This article is going to compare Closet America vs California Closets to pinpoint which direction you should go in moving forward.

Best Hanger For Closets (EDITOR’S CHOICE)

Sale
HOUSE DAY Black Magic Hangers Space Saving Clothes Hangers,...
  • Durable Closet Organizers and Storage - Made from durable plastics with ideal dimensions measuring at: 9.3" wide and 0.8"...
  • Newly Designed Easy To Use Magic Hangers - Each clothing hanger has 5 holes slots to prevent clothes from slipping and...
  • Space Saving Clothes Hangers - The scientific design of the closet organization makes full use of the space, saves 80% of the...

Last update on 2022-09-24 / Affiliate links / Images from Amazon Product Advertising API

Comparing Closet America Vs California Closets

1. Build Quality

Let’s start with the build quality.

Both brands do an excellent job of crafting closets that are well-made, efficient, and look as good as they should be.

In general, you are going to appreciate the overall beauty of the closets and they are going to suit the room they are installed in.

For the most part, it comes down to the type of design you are going for.

Each company has a unique set of designs along with customizations you can implement into the design. With this in mind, you will want to take the time to speak to both companies to see which one has what you are on the lookout for.

If all you are thinking about is build quality then you are not going to go wrong with either option.

They both do a good job of using quality materials.

2. Durability

It is not easy to maintain closets that are made with poor-quality materials or are not designed to remain stable.

With California Closets, you are going to gain access to the type of materials that will last for a long time and will maintain their color longer.

Closet America also does a good job and cannot be shunned for its attention to detail. Their cabinets do last a long time too.

However, California Closets stands out just a little bit more for how well its closets last and how they end up looking as the years roll by.

While the starting point is going to be the same, the longevity of California Closets’ collection cannot be ignored.

3. Use Of Space

What you will want to go through is the utilization of space.

A lot of property owners don’t think about this because they are enamored with the idea of getting the best-looking closets in place.

Yes, the aesthetics of a closet will matter but that is just one part of the process.

You will also want to make sure you go with a closet that will maximize space.

California Closets does a better job of this and offers high-quality spacing with its design elements.

This is important for those who are dealing with a tighter space or want to maximize how they are using the space available to them in a room.

4. Assembly/Installation

The last detail to think about will be the installation process.

In general, both companies do a good job with the installation phase. They will have a specialist sent out to put the cabinet together and it will come down to what you want from the process.

Everything is done based on your schedule and you will be happy with either company when it comes to this factor.

Your goal should be to find a solution that works well and is going to be easy to set up as soon as it is ordered.

Whether it is Closet America or California Closets, you are not going to have to fret about the installation phase.

It will be a breeze.

Final Thoughts

It is these variables that matter when comparing Closet America vs California Closets.

Closet America is known for being more affordable, detail-oriented, and speedy. In comparison, California Closets offers more premium designs, lasts longer, and tends to have a more robust consultation phase.

In general, both of these closet companies are the real deal and you are going to enjoy going with them when it is time to find a good fit.

Be patient when you are finding one of these options and make sure you are trending in the right direction as soon as you get started.

Create a list of requirements when it is time to choose the right type of closet and then speak to both companies to find what you are looking for.

Here’s More On Closets:

  1. Finding A Good Budget-Friendly Closet Provider
  2. Assessing Elfa And California Closets
  3. Choosing Between Home Depot And Closets By Design
  4. Comparing Between Closet World To California Closets
  5. What’s Required For A Baseboard Near A Sliding Closet Door?
  6. How To Choose Between Easy Closets And California Closets

Do Bed Slats Make A Difference? (Solved)

It’s important to not only consider the type of mattress you are resting on but also what is going on underneath it.

There is nothing worse than choosing a world-class mattress only to hate the surface you are resting on due to the box spring underneath.

This happens a lot and it is essential to look at both as a package deal. It is the only way to make sure you are not being affected.

The first thing you want to ask is, do bed slats make a difference?

Yes, bed slats do make a difference. Bed slats are known for being firmer, making less noise, and working well with memory foam mattresses due to their added stability.

A lot of people hate resting on box springs because they make too much noise or don’t feel as good despite having a great mattress.

This is normal and that is why most people are now shifting to bed slats.

Here are some of the advantages of bed slats for modern users and why they are the right way to go for your sleeping experience.

Best Bed Frame (EDITOR’S CHOICE)

OmiNight King Bed Frame 14 inches High 3500lbs Heavy Duty...
  • 【Heavy Duty Bed Frame】The bed frame is made of alloy steel. When you lie on it, it won't shake or squeak. The maximum...
  • 【No box spring needed】The iron bars(steel slat) with the bed frame can provide good support, you can directly put your...
  • 【Noise Free】Reinforced structure for no shake,cushioning gasket to avoid noise,you can add the headboard any time.Choose...

Last update on 2022-09-19 / Affiliate links / Images from Amazon Product Advertising API

Benefits Of Bed Slats

1. Firmer

Bed slats are great because they have a firmer design.

What does this mean?

The surface is not going to bend as much nor is it going to start breaking down easily. This is due to how robust the slats are.

This is good because a mattress should not start folding due to what is underneath. This happens with box springs, especially as they start to show their age.

Your best bet is to go with the bed slats.

They are going to offer a firmer surface that is effective while tossing and turning at night. Whether you are at the edge of the bed or in the center, the firmness is going to be consistent.

This does go a long way for those who are thinking about finding a surface that works for their body type.

2. Less Noise

It is not easy to go to sleep at night when the base is making too much noise.

This happens with box springs and it does get frustrating.

For most people, being able to rest at night means sleeping on a quiet surface. This is more than just finding a good mattress, you also have to make sure the base is strong.

This is how you are going to avoid a situation where the base continues making noise at night.

With this in mind, bed slats are great because they are quiet.

If you are sleeping with your partner in the same bed, this makes all the difference in the world.

3. Good For Memory Foam Mattresses

Most people are now investing in memory foam mattresses.

The reason has to do with the quality of these mattresses and how well they nestle the body at night.

When you are resting for long hours on the same spot, you will want to ensure your joints don’t ache as soon as you wake up.

You will not have these issues due to how well bed slats work with memory foam mattreses. They provide a consistent surface for the mattress to sit on and that delivers better results.

For a lot of people, this benefit alone is useful.

4. Durable

The last advantage has to do with durability.

When you are thinking about investing in a new base, you will want something that lasts, There is no reason for going with a box spring because they tend to break down easily.

Instead, you will want to take a look at bed slats.

Bed slats are rigid and robust. This means they are not going to break down easily even if you are using the bed regularly.

The way these slats are set up also makes them less likely to break down. It is this level of design that goes a long way.

Final Thoughts

Do bed slats make a difference?

Bed slats do make a difference. They are firmer, don’t make as much noise, and tend to last longer when set up. For modern users, it is best to go with bed slats in comparison to a box spring.

Of course, you will need to figure out what works well for your setup.

Some will want to stick with the box spring because it is all they have ever known. However, if you want to go with a better option then it is time to take a look at bed slats.

Bed slats are the real deal and will offer a much better resting experience at night.

Here’s more on beds:

  1. Choosing Between Plywood And Box Springs
  2. Can You Sleep On A Broken Box Spring?
  3. How To Put Small Box Spring In Bigger Bed Frame
  4. Steps To Disassemble A Box Spring
  5. Steps To Eliminate Mold Under Box Spring

Box Spring Vs Plywood (Compared)

The average person is going to assume the only option available to them is a traditional box spring.

While the box spring continues to be a go-to solution for those who want a sturdy surface to rest on, it is still important to look at what else is out there.

This is the best way to make sure you are using a surface that’s good for the body and is also going to last a long time.

To figure out what is best, it’s time to compare a box spring vs plywood.

Box springs are softer, have good support, and offer excellent shock absorption when moving around. In comparison, plywood is firmer, works well with memory foam mattresses, and doesn’t make as much noise.

For the most part, you will want to take a look at the type of surface you are resting on. A person that will be using a memory foam mattress might be inclined to go with plywood as their base.

It is going to help stabilize the mattress and also avoid dealing with unwanted pain while resting in the same spot for long hours.

Here is a breakdown of how the comparison of box spring vs plywood plays out for bed buyers.

Best Box Spring (EDITOR’S CHOICE)

Sale
ZINUS 9 Inch Metal Smart Box Spring / Mattress Foundation /...
  • THE LAST BOX SPRING YOU’LL EVER NEED - Unlike a traditional box spring, the Smart Box Spring is made of solid steel that...
  • DURABLY ENGINEERED - Durable steel is used to construct the inside framework of this foundation; twin size supports a maximum...
  • HIGH PROFILE DESIGN - A 9 inch height is perfect for shorter mattresses or for those who enjoy their bed higher off the floor

Last update on 2022-09-21 / Affiliate links / Images from Amazon Product Advertising API

Comparing Box Spring Vs Plywood

1. Firmness

When comparing a box spring to plywood, it’s important to start with the general feeling you’re going to get resting on them.

With a box spring, you are going to get good support but it is going to be softer.

This means it is going to have a lighter surface when resting on the mattress. This can be good with some mattresses, but can also cause others to fold in the middle, which is not a good feeling.

In comparison, plywood is straightforward when it comes to how well it works.

This is going to be a firm surface and it is not going to budge easily.

This is good for those who want consistency while they are sleeping.

2. Shock Absorption

Shock absorption is important for those who are tossing and turning during the night, especially with a partner.

If two people are resting on the mattress, it is common for the mattress to move while one person turns.

This is not ideal for the other person.

As a result, box springs do well in managing tossing and turning due to enhanced shock absorption.

While plywood does a good job of managing movement, it is not as good as box springs.

This might be important for those who do worry about being woken up in the middle of the night due to unwanted movement.

3. Noise Production

Noise generation is a concern people don’t think about as much as they should.

Box springs are noisy.

They make more noise due to their construction. This is disturbing for those who do have multiple people resting on the same mattress.

This type of noise is not easy to sleep through and it becomes annoying after a while. Even with a good mattress, box springs still make noise.

In comparison, plywood is not going to make as much noise due to how firm it is.

4. Comfort

The one detail most people are going to care about will be something as simple as overall comfort.

If you don’t enjoy resting on the bed, how are you going to like the rest of your sleeping experience?

It is important to like the surface you are resting on while maximizing the features of your mattress.

With this in mind, box springs are not as comfortable because they are softer. This means they tend to have more movement and also make more noise.

In comparison, plywood is a more structured solution that works well with memory foam mattresses.

Since most people are trending towards this type of mattress, it makes sense to go with plywood as the base.

Final Thoughts

Look into these details when comparing a box spring vs plywood.

Box springs are known for being softer, making more noise, and offering good shock absorption. In comparison, plywood works well with memory foam mattresses, is firmer, and will make less noise.

It’s important to think about the type of mattress you are going to be using.

This can often dictate the direction you choose to go in.

If you want a quiet, easy-going experience then it is likely best to stick to plywood. Box springs are better for those who want a softer base.

It will be a subjective decision but more people are leaning towards plywood bases because they are simply more beneficial and well-made.

Here’s more on beds:

  1. Benefits Of Bed Slats
  2. Should You Rest On A Broken Box Spring?
  3. Steps To Install Smaller Box Spring In Bigger Bed Frame
  4. How To Disassemble A Box Spring
  5. How To Take Care Of Mold Under Box Spring
  6. Why Is The Box Spring Increasing The Bed’s Height Too Much?