How To Fix Brown Stain Coming Through Primer (Step-By-Step Solution!)

brown stain coming through primer

Painting a surface is not always straightforward.

A light paint color may reveal stains. This happens for several reasons and it’s important to understand what’s going on before coming up with a strategy.

If you are seeing a brown stain coming through the primer then it’s time to take action immediately.

Brown stains come through the primer due to tannins present in the wood. These tannins cause the stains to become noticeable with lighter paint colors. The best solution is to use a second coat of primer and test again. This should help reduce the brown stain.

Brown stains coming through the paint are common and it’s essential to continue adding coats to the surface. This is to be expected with wooden surfaces and you will have to be meticulous with the coverage.

It’s the only way to see the results you’re after.

This article will look at how to get rid of brown stains when painting along with what to use during the process.

Best Primer (EDITOR’S CHOICE)

Sale
Zinsser 02004 Bulls Eye 1-2-3 All Surface Primer, Quart,...
  • Interior/exterior use on new or previously painted drywall, concrete, wood, masonry, metal and glossy or difficult surfaces
  • Water-based formula seals uniformly and will stick to surface without sanding
  • Dries to the touch in 35 minutes, ready to topcoat in 1 hour and covers up between 87-112 sq. ft. per quart

Last update on 2021-10-14 / Affiliate links / Images from Amazon Product Advertising API

Steps To Fix Brown Stain Coming Through Primer

1. Apply Topcoat Paint To Small Section Of Surface

With tannin bleeding through the primer, it becomes important to reapply the topcoat paint.

This should be your first solution as it might be enough to get rid of the brown stain while painting. In some cases, the primary layer of paint will not be enough especially if it is a lighter color.

Due to this, you are going to want to apply topcoat paint to a small section of the wooden surface. This will help test the surface and see whether or not it is still staining.

It’s common for wood to bleed through white paint due to this reason. The lighter color doesn’t do well with stains.

Apply the topcoat paint and see how the surface responds. This might do the job allowing you to move on.

If not, look at step two and go from there.

brown stain coming through primer

2. Check for New Stains

Your goal will be to look at any new stains that are present after the topcoat has been applied. This is going to let you know whether or not more time-consuming measures are required.

A good example would be a new brown stain popping through even as you apply a bit of topcoat in the corner of the surface.

This can happen and it’s recommended to compare the type of stain you were seeing before and what you’re seeing now. This should let you know what is going wrong with the paint and what should be done moving forward.

3. Apply Second Coat Of Primer

When learning how to stop wood bleeding through paint, it’s essential to apply a second coat of primer. This might be the reason you are seeing brown stains through the paint even when you are applying two layers of paint.

By applying a second coat of primer, you are going to gain additional coverage on the wooden surface.

This should provide relief when it comes to preventing brown stains from showing through the paint.

Your goal should be to evenly apply the primer to make sure it settles nicely on the surface. This is the only way to ensure the paint does look good once it is applied.

brown stain coming through primer

4. Let It Dry For Longer

You will want to let it dry for the entire day rather than immediately painting on it.

This is imperative when it comes to letting the primer settle. Most people assume it’s okay to follow traditional timelines when it comes to letting paint settle on the surface.

This might work with traditional surfaces but that is not going to be the case with wood.

This is a real concern due to the primer still being wet and spreading on the surface as you begin to paint on top of it. This is something you can’t afford with wood as the brown stains are going to begin to come through.

Final Thoughts

These are the steps to follow with a brown stain coming through the primer.

When brown stains come through the primer, it’s recommended to apply a second coat of paint. If the stains remain, it’s best to apply a second coat of primer and let it dry for the entire day. This will ensure the brown stains disappear.

It’s important to take your time when stains are coming through the paint. Don’t rush it and make sure the coverage is as even as it needs to be.

This will go a long way in getting rid of issues that involve brown stains or any type of stains under the paint.

Read More About Painting:

  1. Dealing With Moldy Paint
  2. Using The Right Type Of Paint Remover
  3. Oil Primer Vs Latex Paint
  4. Strategy For Painting Chandelier
  5. Choosing The Right Paint Color For Walls

Why Has Lava Lamp Wax Hardened? (Step-By-Step Solution!)

lava lamp wax hardened

When using a lava lamp, it’s important to keep tabs on the wax.

It needs to flow and if the wax gets stuck, it will ruin the lava lamp. You have to find a solution to make sure the lava lamp wax doesn’t harden at any point.

If you are noticing that the lava lamp wax is hardened, it’s time to implement an immediate solution.

Lava lamp wax can harden when the room’s temperature decreases or the coil stops working. It’s essential to reset the lava lamp by increasing the temperature (i.e. use a hairdryer) and start moving it around in small, circular motions. This should help loosen the lava lamp wax.

It’s important to note when lava lamp wax hardens, it will harm the lava lamp as a whole. You need to make sure the hardened lava lamp wax doesn’t lead to unwanted damage.

This article will provide a step-by-step breakdown of what to do when the lava lamp wax has hardened inside.

Best Globe Lava Lamp (EDITOR’S CHOICE)

NSL Lighting Galaxy Light 3D Galaxy Lamp 7.1Inch 16Colors...
  • 【Best Gift】 When you are choosing birthday gifts, anniversary gifts, special gifts for her/him, friends, and family. Are...
  • 【Perfect craftsmanship】 Advanced 3D print technology is used to provide the perfect starry sky image. It appears a real...
  • 【Easy to use】 16 kinds selectable colors and stepless adjustable brightness. You can use the remote control to change the...

Last update on 2021-10-13 / Affiliate links / Images from Amazon Product Advertising API

How To Fix Hardened Lava Lamp Wax

1. Increase The Room’s Temperature

If the lava lamp wax is stuck at the bottom, it is important to focus on the room temperature around the fixture.

In general, when the room temperature drops, this affects the wax. It will begin to harden and “stick” to one side of the lava lamp. This restricts movement and causes the lava lamp to stop working the way it is designed to.

So, what is the answer then?

You will want to try two things.

The first option is to take a hairdryer or heat source and begin to aim it at the stuck lava lamp wax. The goal is to use direct heat as a way to loosen the wax before it begins to flow again. Another option is to increase the room’s temperature and this will help loosen the wax.

Each situation has merits and it comes down to what you prefer to do. The hairdryer trick is faster and should loosen the wax in minutes.

lava lamp wax hardened

2. Change The Light Bulb

If the lava lamp stopped flowing, you will have to change the light bulb.

The best light bulb for a lava lamp is one that is going to be higher in wattage. This will increase the amount of power and heat that is running through the fixture at any given moment.

Perhaps, the previous light bulb was not doing the job based on external factors inside the room. This is why it’s important to change the light bulb to a higher wattage one to see if that works.

In a lot of cases, this can prove to be a solution that works well and yields good results.

3. Move The Lava Lamp Around

You will want to begin to move the lava lamp around in circular motions.

The goal here is to simply make sure the wax is moving around inside the lava lamp. When it hardens, the last thing you want is for it to stick to the top or bottom.

This is imperative when it comes to getting more out of the lighting fixture and ensuring it works well in all situations. It’s a common mistake people make when that is the last thing you should be doing.

Be patient and continue to swirl the lava lamp around as much as you can. Remember, the goal is not to be vigorous with your movements. Do it slowly and continue to do it for as long as you can.

lava lamp wax hardened

4. Let It Run For 10-12 Hours Straight

Once the lava lamp starts working, you will want to keep it on for at least 10-12 hours.

The goal is to ensure the lava lamp wax does get the time to flow in heat as that is the only way it won’t harden.

If you immediately turn off the lava lamp, the wax may harden again!

Final Thoughts

These are the steps to follow if your lava lamp wax has hardened.

When the lava lamp wax hardens, the reason tends to do with a drop in temperature. This can cause the wax to stick to the top or bottom of the fixture. The best solution is to increase the heat around the lava lamp, change the light bulb, or move it around until the wax loosens.

Be patient during this process and try each solution to see which one works.

It should not take a long time to complete especially if you are using a good, stable heat source. Just continue to work away at the lava lamp to see good results.

Read More About Lava Lamps:

  1. Staying Safe With Lava Lamps
  2. Reasons To Avoid Severely Shaking Lava Lamp
  3. How To Keep Lava Lamp Running
  4. Tips For Protecting A Lava Lamp
  5. How To Unstick Lava Lamp Wax

My Lava Lamp Wax Is Stuck At The Top! (Step-By-Step Solution!)

My lava lamp wax is stuck at the top

Lava lamps can stop working when the wax is not flowing as it is supposed to.

This can lead to disconcerting results that are difficult to manage. The best-case scenario is to find a way to get the lava lamp wax unstuck to ensure it doesn’t ruin the lamp.

This is key if you are worried about how the lava lamp wax is stuck at the top.

The best solution for lava lamp wax stuck at the top is to place a higher wattage bulb, move the lava lamp around, and use heat to melt the wax. This should allow the wax to begin flowing downwards instead of being stuck at the top.

It’s not going to be a quick fix.

You will have to take your time and complete each step methodically. As long as you do this, the lava lamp should be good to go and is going to work the way you want it to.

This article will provide a step-by-step breakdown of how to fix stuck lava lamp wax.

Best Lava Lamp (EDITOR’S CHOICE)

Lava Lamp Original Brand 20 oz - Yellow Wax with Purple...
  • An official, authentic Lava brand lamp; Silver finish base, purple liquid, yellow lava._x000D_
  • 20-ounce size; 14.5", classic motion-style light; Includes one 25 watt appliance bulb._x000D_
  • Glass housing with sturdy base and matching top_x000D_

Last update on 2021-10-04 / Affiliate links / Images from Amazon Product Advertising API

How To Fix Stuck Lava Lamp Wax

1. Use a Hairdryer or Heat Source

You will have to use heat to get the lava lamp wax unstuck.

A common issue people deal with is the heat becomes stuck near the top and then the surrounding environment is cold. This adds to the problem as the wax ends up solidifying inside the lava lamp and becomes difficult to fix.

A lot of people in this situation need to find a viable heat source.

The goal is to melt the lava lamp wax to get it unstuck. This is done by placing it near a heat source and then melting it similarly to how you would with a block of ice.

If there is enough heat, it will eventually cause the lava lamp wax to become unstuck. Be patient while doing this and keep moving the heat source to protect the glass.

My lava lamp wax is stuck at the top

2. Move The Lava Lamp Gently

You will also want to take the time to move the lava lamp in a circular motion.

The idea behind doing this is to get the lava lamp wax to move due to gravity. If there is enough movement, this could be enough to get the wax to fall.

It is not going to happen right away but this tends to work well when you use it alongside the heat method. When you do both things in combination, it is likely the wax is not going to resist for too long and is going to move.

Remember, you don’t want to do this roughly. There is no need to.

Just do it gently and make sure the lava lamp is moving as much as it needs to. This is essential.

3. Place a Higher Wattage Bulb Inside

You will want to think about going with a higher wattage bulb inside. This will ensure you don’t end up in a situation where even a little bit of additional heat from the bulb would have gotten the job done.

Sometimes, people will attempt difficult solutions when something as simple as this is enough.

Start with the light bulb change and see if that helps with the lava lamp wax.

My lava lamp wax is stuck at the top

4. Be Patient

The last step is to be patient.

This is one of the most important details people don’t think about when it comes to a lava lamp. You should not assume the lava lamp is going to start working right away.

It will take a bit of time to get the lava lamp wax unstuck and that’s normal. If it has been in that state for a bit then you are going to have to use a wide array of methods including the ones listed above.

Follow each step and make sure you are taking your time during the process. The more you rush, the worse the results are going to be.

Final Thoughts

My lava lamp wax is stuck at the top!

If your lava lamp wax is stuck at the top, it’s recommended to move the lava lamp in a circular motion and place it near a heat source (i.e. hairdryer). The goal is to get the heat to reduce the wax’s grip at the top causing it to eventually dribble down.

This is going to take a bit of time but it will be well worth the effort as soon as the lava lamp begins working again.

Be patient and methodical with your approach. This is the only way to see the results you are hoping for.

Read More About Lava Lamps:

  1. The Safety Of Lava Lamps
  2. Reasons To Not Shake Lava Lamp
  3. How To Get Lava Lamp To Move
  4. How To Protect Lava Lamp
  5. How To Use Salt Lamps For Spirits

Why Is Top Outlet Not Working But The Bottom Is? (Solved!)

top outlet not working but bottom is

The outlet has two connecting points and it’s important for both of them to function. Most property owners will be making use of both at one point or another.

This is why it’s important to understand what’s happening when a top outlet is not working but the bottom is.

If a top outlet is working but the bottom isn’t, this can often mean the entire unit has been damaged. It can also involve the tab or switch being broken, which can cause either the top or bottom outlet to stop working. The best course of action is to replace the wall outlet.

You might attempt to repair the wall outlet but it will not yield good results. It’s usually better to replace it.

This article will look to analyze what’s going on if the top outlet is not working but the bottom is.

Best Outlet For Home (EDITOR’S CHOICE)

GFCI Outlet Tamper Resistant Receptacle with LED Indicator,...
  • SAFETY GFCI OUTLET - Special receptacle with leakage protection, when there is a leakage in the circuit at home, it can...
  • AUTOMATIC DETECTION - You can detect whether there is a problem with the circuit without complicated operations. GFCI...
  • TAMPER RESISTANT RECEPTACLE - The wall socket is well-sealed waterproof and splash-proof and can be used in the bathroom or...

Last update on 2021-09-27 / Affiliate links / Images from Amazon Product Advertising API

Reasons The Top Outlet Is Not Working But The Bottom Is

1. Damaged Outlet

When half of an outlet stopped working, this means the outlet is likely damaged.

You might attempt to open the faceplate and look at what’s going on inside. For the most part, you might not find anything because the outlet can get damaged due to natural wear and tear.

This is normal and something you can expect in older properties.

If you are dealing with an older outlet then it’s possible the top outlet will stop working as it is supposed to. When this happens, you are better off replacing the entire piece to make sure it goes back to how it was.

Don’t attempt to keep using the outlet as the bottom one will go out too. It is only a matter of time.

This is why waiting things out is not recommended and will do a lot of damage to the rest of the circuit. Switch the outlet as soon as you realize the bottom one is not working anymore.

top outlet not working but bottom is

2. Tab Or Wall Switch Is Ruined

If you are dealing with a dead outlet then it might be time to look at the switch or tab.

Most outlets come with a tab that is designed to allow one of the outlets to work while the other doesn’t. This is done to stagger the power and to make sure you have customized control over how the electricity travels.

This matters a lot when you are figuring things out and coming up with a plan.

If you attempt to use the tab or wall switch and it doesn’t work, this might be the problem. It might have gotten stuck or broken.

When this happens, you will have to replace the dead outlet to make sure the new tab does work as it is supposed to.

3. Incorrect Wiring

The wiring is not going to always be in line with what’s required.

This happens when the wiring was installed incorrectly, which is common with newer installations. However, if the circuit was already working and the outlet didn’t give you trouble in the past, it’s best to look at the outlet itself.

The wiring will likely be okay unless there was a power surge that fried the wire. You can do a visual inspection to see if there is any evidence of this.

If not then you are going to have to change the outlet to make sure it works again.

top outlet not working but bottom is

4. Damaged Plug

This might seem like a silly reason but it does happen.

Your first step should be to take something else and plug it into the top outlet. You will want to see whether or not it is the plug that is creating the issue or the outlet.

You should not switch the outlet until there is confirmation. Otherwise, you might end up wasting a lot of time when it is the device’s plug that is the real issue.

Final Thoughts

These are the tips to look into if the top outlet is not working but bottom is.

When a top outlet is not working but the bottom is, the outlet is likely damaged. This can happen when the tab stops working as it is responsible for switching power between outlets. Another reason can include incorrect wiring or a broken outlet.

The best course of action when in this situation is to simply replace the outlet. This will ensure you get the outlet to work the way you want it to and it doesn’t break down on you.

If you attempt to keep using the outlet then it will eventually give out too. This is something you should prep for.

Read More About Wires:

  1. Finding The Right Outlet For 20 Amp Circuit
  2. Linking Mini Fridge To An Outlet
  3. Reasons Breaker Didn’t Trip When Outlet Stopped Working
  4. Reasons An Outlet Stops Functioning
  5. Which Outlets Are Good For Kitchens?

What Happens If You Wire Live And Neutral Wrong? (Answered!)

What happens if you wire live and neutral wrong

A fully functional electrical circuit is solely dependent on its wiring being in the right spot. If there are any issues with the connection, it will ruin the flow of electricity.

Keeping this in mind, what happens if you wire live and neutral wrong?

If you wire live and neutral wrong, it will cause the setup to short circuit. In most cases, the circuit will break and one of the wires may burn. Once the wire is replaced and connected in the right spot, the circuit will work again.

This is why it’s important to connect each wire in the right spot. Any mistakes in this regard can lead to the entire circuit going down.

Unfortunately, this mistake does happen more often than it should.

Here is a look at what happens if you wire live and neutral wrong in an electrical circuit.

Best Outlet For Home (EDITOR’S CHOICE)

GFCI Outlet Tamper Resistant Receptacle with LED Indicator,...
  • SAFETY GFCI OUTLET - Special receptacle with leakage protection, when there is a leakage in the circuit at home, it can...
  • AUTOMATIC DETECTION - You can detect whether there is a problem with the circuit without complicated operations. GFCI...
  • TAMPER RESISTANT RECEPTACLE - The wall socket is well-sealed waterproof and splash-proof and can be used in the bathroom or...

Last update on 2021-09-27 / Affiliate links / Images from Amazon Product Advertising API

Main Effects Of Wiring Live And Neutral Incorrectly

1. Short Circuit

When you swap live and neutral wires, it will have a direct impact on the electrical circuit.

This includes damaging the circuit and/or causing it to stop working. The short-circuiting will be managed by the circuit breaker but it will require you to then fix the problem.

The correct placement of both wires is essential.

Any issues in this regard will ensure the electrical circuit doesn’t work at all. This can lead to frustrating results that are inefficient and will likely damage the wires.

Your best course of action is to shut off the electrical power and then assess the circuit. This includes seeing whether or not the breaker tripped.

In a lot of cases, the circuit is not going to work until the wires are fixed. The connection is going to be gone, which is why testing the wires is essential. You want to ensure electricity does go through the wires once the power is turned back on.

2. Cuts the Flow of Electricity

A noticeable impact is going to be made on the electricity coming from the circuit.

It will stop.

This is a common reaction to the wires being in the wrong spot. You have to make sure both the neutral and live wires are in the right spot.

If you don’t take the time to do this, the flow of electricity is going to come to a halt. This is one of the main concerns associated with having the wires incorrectly connected. You have to be careful to test where the wires are and then put them back where they need to be.

What happens if you wire live and neutral wrong

3. Can Burn One of the Wires

Depending on how much electricity is going through the circuit and where the wire was connected, it can cause the live wire to die.

This happens when the live wire burns because it was in the wrong spot.

In most situations, the neutral wire is going to be fine and can be put in a different spot. The goal is to fix the live wire as that is where the main problem lies.

A live wire getting burned can be frustrating but it is replaceable. The goal should be to spot where the live wire has burned and then replace it as soon as possible.

This should get the electrical circuit working as you want it to.

What happens if you wire live and neutral wrong

4. Requires Replacement Wire

One of the main effects that you will have to prep for will be what happens to the replacement wire. This is one of the biggest hurdles a person has to deal with when it comes to a situation such as this because the live wire is likely to burn.

This is due to the surge of electricity that goes through the circuit and the incorrectly connected live wire.

You have to be careful and turn off the power before touching the wire.

Once you have done this, the live wire will need to be replaced, It’s best to consult with a certified electrician to learn more about your options in a situation such as this.

Final Thoughts

What happens if you wire live and neutral wrong?

If you wire live and neutral wrong, the most common effect is going to involve short-circuiting. This will mean the circuit stops working. You will also notice the live wire is going to be burned depending on how much electricity went through.

The best course of action in a situation such as this is to simply replace the live wire and re-test the electrical circuit.

For most scenarios, the electrical circuit will start working as you hope for it to.

Read More About Wires:

  1. Choosing Outlets For 20 Amp Circuit
  2. How To Connect Mini Fridge To An Outlet
  3. Choosing The Right Wire Size for 60 Amps
  4. What Causes Outlet To Stop Working?
  5. Looking At Neutral And Ground Wiring

I Accidentally Used Moldy Paint! (Step-By-Step Solution)

peel away 1 vs 7

It’s common to make mistakes and this can include using the wrong type of paint at home.

One of the main concerns people have is using damaged paint without noticing. This can include you shouting “I accidentally used moldy paint!” in a panic when you notice the difference in quality.

Using moldy paint is not an issue once it has been mixed in a separate bucket. When the paint dries, simply apply a second coat using a stronger paint to cover any noticeable splotches, stains, or discoloration.

This is not an issue to be concerned about and you can quickly resolve it without another coat. The most important factor is to ensure the moldy paint is not used again as a secondary coat.

Here is a look at what you should do when moldy paint is used accidentally including a step-by-step breakdown of the process.

Best Paint Remover (EDITOR’S CHOICE)

Dumond Chemicals, Inc. 1005N Peel Away1 Heavy-Duty Paint...
  • Paint Supplies/Paint Solvents, Cleaners & Removers
  • Manufacturer: Dumont Chemicals
  • Made in: United States

Last update on 2021-09-25 / Affiliate links / Images from Amazon Product Advertising API

Steps On How To Fix Moldy Paint On Surface

1. Inspect the Surface

The dangers of using old paint are well-known when it comes to damaged spots and uneven finishing. This is what most people get worried about.

In general, you will want to take the time to inspect the surface and better understand your options. If the surface is incredibly textured and damaged, this might be a sign that the paint didn’t settle at all.

In most cases, this is not going to happen. Even if you do use moldy paint at home, it will simply dry and looks respectable in the short term.

The first part of the process will be to inspect the surface and make sure it does get a chance to settle. You don’t need to touch or remove it at this stage. The only time paint should be removed is if the paint was completely ruined and didn’t settle at all.

I accidentally used moldy paint

2. Let The Paint Dry

You are now going to let the paint dry.

Yes, it might seem counter-productive to do this but it’s the only way to go. Letting the paint settle and dry is going to be essential to ensure the second coat is easier to apply.

If you attempt to remove wet paint, it might ruin the surface underneath and leave unnecessary marks. You want to avoid a scenario such as this because it will make your work harder. Look to paint on an even surface, which can include a primary coat of moldy paint.

While it is not ideal, it is not the worst scenario to deal with.

You can paint over moldy paint and that is what you should plan to do. Even if the dry paint still smells, you will have the opportunity to cover it with the second coat.

3. Clean The Surface Again

You will now want to clean the surface.

Take a cloth and begin running it over the primary coat. This will help even the surface and make sure any choppiness to the paint is eliminated beforehand.

A concern people have is the primary coat will begin to come off. If you let it dry, this is not going to be a problem at all because the coat will already have settled into place.

Take your time cleaning the moldy paint and ensure to do it from end to end. This is a must.

I accidentally used moldy paint

4. Apply a Second Coat Using Fresh Paint

The final step is to apply the second coat of fresh paint.

You will want to learn how to paint over moldy paint by using fresh paint. The goal is to take proper paint that has been verified as being fresh to complete the second coat.

If you do this, the moldy paint is going to become an afterthought even if it was going to pose a problem.

When you are painting over moldy paint, it is important to cover the entire surface. Don’t leave spots as that might become a problem later on as the paint starts to age. Go through every inch of the surface and make sure it is appropriately covered.

This is essential for doing things the right way.

Final Thoughts

I accidentally used moldy paint!

When you accidentally use moldy paint, it’s okay to let it dry and settle. The paint will likely have neutralized as soon as it was mixed in the bucket. If you are still concerned, it’s recommended to clean the surface and paint a second coat using fresh paint.

This will ensure the surface is protected and looks the way you want it to.

There is no reason to do anything dramatic with a scenario such as this one.

Read More About Paint:

  1. How To Use The Right Paint Remover
  2. How To Remove Smell Of Paint Thinner From Bathroom
  3. Using Oil-Based Primer With Latex Paint
  4. Dealing With Rough Texture Of Spray Paint
  5. How To Paint Grout With Chalk Paint

Outlet Stopped Working Breaker Not Tripped (Solved!)

outlet stopped working breaker not tripped

When an outlet stops working, you will automatically assume the breaker is going to get tripped. This is not always the case and there can be an underlying issue to resolve before the circuit starts working again.

It’s common for people to state their outlet stopped working yet the breaker did not trip.

The reason a breaker does not get tripped is due to loose wiring, an improper connection, or too many connections on one circuit. The best course of action is to check the wiring for the malfunctioning outlet and reset the breaker. This should help activate it again.

One of the reasons this tends to happen has to do with the breaker simply not being connected the way it needs to be. This can become frustrating and is a real concern for those who want to use the outlet.

This article will analyze what to do if your outlet stopped working and the breaker did not get tripped.

Best Outlet For Home (EDITOR’S CHOICE)

GFCI Outlet Tamper Resistant Receptacle with LED Indicator,...
  • SAFETY GFCI OUTLET - Special receptacle with leakage protection, when there is a leakage in the circuit at home, it can...
  • AUTOMATIC DETECTION - You can detect whether there is a problem with the circuit without complicated operations. GFCI...
  • TAMPER RESISTANT RECEPTACLE - The wall socket is well-sealed waterproof and splash-proof and can be used in the bathroom or...

Last update on 2021-09-27 / Affiliate links / Images from Amazon Product Advertising API

Reasons Outlet Stopped Working Breaker Not Tripped

1. Loose Connection

The main concern is going to be a loose connection.

This can be anywhere along the circuit. It doesn’t have to be right near the breaker even though that is the most common spot for the issue to pop up.

Look at the wiring from one end to the other to see where the issue is. You will notice specific wires that are loose or spliced. If it is spliced, you will have to replace the wiring.

If it is simply loose, you can quickly put it back into place to secure the connection. Once you reset the breaker, it will be good to go and the electrical outlet is going to start working.

Always test the connections because this is where most people find trouble. Over time, the wiring can become loose especially if new work was done causing the connections to weaken.

It is also smart to look at the other outlets to see whether or not the connections are secure. This will bode well for the longevity of the circuit and how efficient it is.

outlet stopped working breaker not tripped

2. Damaged Breaker

In some cases, it is the breaker that is going to be a problem.

The breaker might get worn down or blown out. This happens when too much load is put on the circuit and the breaker does not trip the way it is supposed to.

You will want to check the structural integrity of the breaker and the setup as a whole. If you are not taking the time to look into this then the breaker might continue to cause issues down the road.

The best way to check this is to reset the breaker. If the outlet still doesn’t work then it is likely due to the breaker not being in good shape.

3. Too Many Connections To One Circuit

This tends to happen when new work is done on the electrical circuit.

Mistakes can be made where too many connections are attached to a single circuit. This overloads the circuit and stops different appliances and outlets from working.

The installation phase is important due to this reason and that is why getting a qualified electrician to complete the work is essential. It makes a difference.

The best strategy for this type of problem is to remove the connections and re-wire them. It is the only way to get rid of the problem.

outlet stopped working breaker not tripped

4. Breaker Has To Be Reset

Sometimes, the breaker has to be reset and that is the only issue to contend with.

To do this, you are going to want to switch the breaker to the “off” position. You will want to then switch it back on.

If the breaker refuses to reset, this might have to do with a greater issue in your electrical setup. This can include a ground fault problem or a dangerous short circuit.

You will have to call a professional to take a look at the circuit as this can become a hazard for the property and anyone inside.

Final Thoughts

If your outlet stopped working yet the breaker did not trip, this means there is an underlying issue to deal with.

The reason a breaker might not trip is due to loose wiring, too many connections to a single circuit or a damaged breaker. The best strategy to resolve this problem is to check the wiring and then reset the breaker.

If it doesn’t work, you likely have a short circuit that has to be fixed by a professional. Do not compromise on your safety when it comes to this and do call a certified electrician to work on the circuit.

This is a must.

Read More About Outlets:

  1. Setting Up Outlets For 20 Amp Circuit
  2. Installing Mini Fridge With Outlet
  3. Using 20 Amp Outlets In Kitchen
  4. Which GFCI Outlet For Kitchen?
  5. Comparing Neutral To Ground Wiring

How Far Should Drywall Be Off The Floor? (Solved!)

how far should drywall be off the floor

Installing drywall is a foundational element for designing a living space.

Most builders spend a significant amount of time when it comes to installing a drywall and ensuring it’s set at the right height. Any mistakes in this regard can ruin the foundation of the home and lead to breakage.

This is why it’s best to ask, how far should drywall be off the floor?

Drywall should be 1/2″ off of the floor for maximum efficiency. This rule of thumb is mandatory to ensure the drywall has space to expand. Remember, it’s common for a wall and/or floor to expand as it ages. It’s also beneficial to have a 1/2″ gap to avoid moisture-related damage as water spills nearby.

Setting drywall right on the base of the floor is dangerous.

This will not bode well for the longevity of the drywall and lead to potential issues down the road. It’s highly recommended to maintain that 1/2″ gap at all times.

Here is a detailed look at understanding how far should drywall be off the floor along with the importance of a 1/2″ gap.

Best Drywall Mud (EDITOR’S CHOICE)

U S GYPSUM 385140 385140004 All Purpose Joint Compound, 3.5...
  • The package length of the product is 18.29 inches
  • The package width of the product is 18.29 inches
  • The package height of the product is 19.69 inches

Last update on 2021-09-27 / Affiliate links / Images from Amazon Product Advertising API

Reasons To Have 1/2″ Gap Between Drywall and Floor

1. Allows For Natural Expansion

The gap between drywall and concrete floor should always be 1/2″.

This is a minimum and it’s the best way to allow for natural expansion. Over time, the wall and flooring will shift and that is due to how those materials react to temperature, moisture, and other environmental conditions.

Many homeowners assume this type of expansion won’t happen but it will. This is scientifically proven and has to be accounted for when working on drywall at home.

There has to be space for natural expansion or the drywall will eventually break down.

This doesn’t mean you need a large gap between drywall and floor, but you should be using some type of drywall floor gap tool to measure things out.

This will ensure any type of expansion that does take place will happen without hindrance.

how far should drywall be off the floor

2. Prevents Cracks

It’s essential to think about the drywall’s longevity.

Having a gap between floor and drywall matters. It’s the only way to prevent unnecessary cracks from developing due to natural expansion.

The materials will shift and expand causing things to crack. Drywall tends to be robust but only to a certain extent. You will have to account for this when installing drywall on-site.

The one mistake you are not going to want to make is to assume cracks won’t occur. Drywall can crack if the gap is not large enough.

3. Prevents Moisture-Related Damage

Moisture-wicking is a real concern with drywall.

This is commonly associated with water damage or flooding in the room. As soon as there is too much water near the base of the drywall, additional damage can be done.

You will want to maintain a gap between the floor and drywall. This is the only way to allow for moisture to settle in that gap and not touch the drywall at all.

It will also allow for the water to pass through and sometimes a little bit of a gap does matter. It will be enough for the drywall to survive and not break completely.

how far should drywall be off the floor

4. Creates Stability

It’s important to remember, it is not okay for drywall to touch the floor.

It is going to cause the entire setup to become unstable. This is due to how materials expand and how the drywall is going to sit in its place.

If it is right on the floor, it will eliminate any room for error or natural adjustments. This is a risk no one should be taking when rebuilding a room.

An unstable setup is going to lead to unstable results. It is simply not worth it.

Final Thoughts

When learning how far should drywall be off the floor, it’s important to stick to a rule of thumb and be consistent.

Drywall should always be 1/2″ off of the floor to allow for expansion and stability. It will also prevent the likelihood of water damage when there is moisture near the base of the drywall.

All of these details need to be accounted for when setting up drywall. If there is no gap, it will lead to a situation where the drywall begins to break down.

This is when additional changes are required including stripping the drywall and re-installing it. It is these issues that can lead to large repair bills that can be avoided by accounting for potential dangers associated with expanding materials.

Read More About Walls:

  1. How To Set Up Tiles On Drywall
  2. Choosing Good-Quality Drywall Mud
  3. How To Position Shower Head On An Outside Wall
  4. How To Paint Specific Types Of Walls
  5. How To Protect Walls Near Oven

Texture Mud vs Joint Compound – Which One Is Best?

texture mud vs joint compound

Completing a drywall installation demands the right materials and this includes drywall mud.

A lot of people get confused with the number of options available at local home hardware stores. It’s recommended to compare and contrast what these options are all about to figure out what is best for your needs.

A common comparison made involves texture mud vs joint compound.

Texture mud is known for being thinner and will shrink when applied. On the other hand, the joint compound is a thicker, more robust drywall mud that offers good durability. Its issues involve being difficult to sand and finishing has to be handled with care.

It’s important to look at these differences when choosing the right drywall mud for your home. The wrong choice will make installing drywall a much harder task.

This article will compare texture mud vs joint compound and pinpoint which one is best for your drywall installation.

Best Drywall Mud (EDITOR’S CHOICE)

U S GYPSUM 385140 385140004 All Purpose Joint Compound, 3.5...
  • The package length of the product is 18.29 inches
  • The package width of the product is 18.29 inches
  • The package height of the product is 19.69 inches

Last update on 2021-09-27 / Affiliate links / Images from Amazon Product Advertising API

Differences Between Texture Mud vs Joint Compound

1. Thickness

Using all-purpose joint compound as drywall mud works.

It is a thicker variation that is easier to apply and tends to hold better. In comparison, texture mud is thinner and that can lead to issues about durability and overall quality.

When finding the best drywall mud, it’s important to consider the thickness in great detail. This will matter a lot when it comes to finishing and making sure the joints hold as well as you want. Any issues in this regard can lead to breakage.

When looking for crack-resistant drywall mud, it does become essential to look at the mud’s thickness. It’s the only way to feel confident in the solution and how well it works out.

When drywall mud is thin, it becomes harder to handle at the best of times. This is why most people will use texture mud for specific parts of the installation. This allows you to go with a more refined solution that does last as long as you want it to.

While thickness is not the only factor to account for, it will stand out.

texture mud vs joint compound

2. Durability

When comparing all-purpose joint compound to texture mud, it’s always smart to consider the durability of each solution.

Choosing the right drywall mud is going to require a durable solution. This is a must.

All-purpose joint compound is thicker and that allows it to last longer. The reason has to do with how well it holds in comparison to texture mud. While texture mud is going to do a decent job, it will not be a long-term solution.

It simply will not last the way you want it to.

3. Finishing

The all-purpose joint compound takes a longer time to sand and that is going to be something you have to account for.

While it is going to be longer-lasting, you still have to prep the surface a lot more. It’s the only way for the all-purpose joint compound not to look good.

On the other hand, texture mud also has finishing issues but it will not require as much prep work on your end.

These are details you are going to want to think about as a property owner. If you don’t, the drywall is not going to last as long and the joints will be compromised. This is a key factor to think about with any type of drywall mud.

texture mud vs joint compound

4. Shrinkage

Dealing with shrinkage is something people don’t think about enough.

You have to understand drywall mud can shrink as soon as it settles on the surface. This can become a problem as you will assume a certain amount is enough when that is simply not the case.

Re-applications become a requirement with texture mud and that is frustrating. You will have to budget for this as well.

On the other hand, an all-purpose joint compound tends to do well with one application and is not going to shrink as easily.

Final Thoughts

These are the differences to look at when comparing joint compound to texture mud.

Joint compound tends to be stronger, durable, and more reliable in comparison to texture mud. However, it can also take longer to settle and will demand rigorous sanding to ensure the surface is prepped for it.

These are details you are going to want to think about when finding the right type of drywall mud. Choosing the wrong drywall mud will compromise the project and how well the drywall holds up over time.

Take your time to compare texture mud to joint compound to see which one is best for your particular situation.

Always go with what works for your drywall.

Read More About Walls:

  1. Installing Tiles Over Drywall
  2. How To Deal With Asbestos Tiles
  3. Handling A Clicking Wall
  4. Setting Up Gap Between Drywall and Floor
  5. How To Place Recliner Near A Wall

I Accidentally Removed Asbestos Tiles! (Step-By-Step Solution)

accidentally removed asbestos tiles

The dangers of asbestos is well-recorded in recent history.

Studies show asbestos exposure can lead to a long list of medical conditions and it’s recommended to ensure it doesn’t spread into the air at home. In the 1960s, it was common for these tiles to be removed without a second thought but times have changed.

The research is clear and it’s important to be careful.

What if you accidentally remove an asbestos tile?

If an asbestos tile is accidentally removed, it’s recommended to get the tile tested for asbestos. Once tested, it’s best to have a certified specialist air the property out and remove all signs of asbestos on the property.

The one mistake you don’t want to make is to leave the property in its current condition. Letting asbestos spread is dangerous and will lead to significant health issues over the long term.

This article will take a look at what to do when you remove an asbestos tile and what to look for as a homeowner.

Best Testing Kit For Asbestos (EDITOR’S CHOICE)

Asbestos Testing Kit (Quality PPE Included) - Next Day...
  • 1 Business Day turnaround on Samples - All samples tested and results confidential sent via email within 24hrs of receipt of...
  • Quality Industry Standard PPE Supplied - Mask - Coveralls - Gloves
  • Tested in NVLAP approved Lab - Samples are tested using PLM - Lab fees Included

Last update on 2021-09-26 / Affiliate links / Images from Amazon Product Advertising API

How To Remove Asbestos From Home

1. Test the Asbestos Tiles Using Kit

The first course of action will be to invest in a testing kit.

The goal is to see whether or not there is asbestos in the tile. It’s often assumed there is asbestos but that is not always a given.

Instead of assuming, take the time to run a proper asbestos test to see what’s going on. This will shed light on how excessive the asbestos situation is in your home.

Once you have run the test, you will have a much better idea of what needs to happen next.

You can also have a specialist run the test and this comes down to your budget. Most will do it for less than $100.

It’s a worthwhile investment and one you should be focused on as a homeowner worried about asbestos exposure at home.

accidentally removed asbestos tiles

2. Remove The Tiles

It’s important to learn how to remove asbestos tiles during the process.

The first step will be to figure out how to remove asbestos tiles’ glue. The best solution is to take a suitable solvent to melt the mastic, which will then loosen the asbestos tile. Be patient during this process and wear the right gear to avoid additional exposure.

Removing the tiles is important because the asbestos has to be eradicated as soon as possible. You don’t want this to be a lingering concern.

If you accidentally removed asbestos tiles, this doesn’t mean the following removal needs to be done carelessly. Take your time, come up with a plan, and then remove the tiles one by one. This is a must.

accidentally removed asbestos tiles

3. Consult With Specialist for Asbestos Removal

You will want to take the opportunity to consult with an asbestos removal specialist.

The issue is, this is one of those removals that should not be done on your own. It carries quite a bit of risk and additional exposure is something that has to be taken into account as a homeowner.

You can remove them on your own, but that risk is usually not worth it.

Let a professional asbestos removal specialist come in to ensure the removal is a safe one. This will ensure all of the tiles are removed and extra tests are run to spot pockets of asbestos in other parts of the property.

Doing this the right way is essential.

If the asbestos tiles are wet then this needs to be expedited. The risk of inhalation is low but it will still be there as soon as the tiles are wet. Get rid of them and make sure you are laser-focused on doing things properly.

The same applies to asbestos tiles under the carpet.

Be methodical, figure out where the tiles are, and get rid of them immediately.

Final Thoughts

If you accidentally removed an asbestos tile, it’s best to take precautions and test everything in the house.

If an asbestos tile is accidentally removed, it’s best to test the tile for asbestos. If it comes back positive, the best course of action is to remove all of the tiles. This should be done by a professional to avoid unwanted exposure.

For those looking to do it on their own, you will want to invest in the proper gear beforehand. There is a risk associated with being around asbestos and a lot of research has been done on the topic already.

Focus on coming up with a removal strategy and then begin the project.

Keep that in mind and go from there when it comes to seeing results.

Read More About Tiles:

  1. Placing Tiles Over Drywall
  2. How To Paint Tile Floors
  3. Dealing With Water Leaks From Tiles
  4. Installing Brand-New Floor Over Tiles
  5. Dealing With Toilet Leak Near Tiles