Sherwin-Williams paint has to be prepped before application.
Each situation is going to be unique but this is key when spraying Sherwin-Williams paint for the first time.
You will want to ensure it’s thin enough to work well when sprayed. Otherwise, the texture and finish will be off from what you want.
It’s important to understand the steps to follow when thinning Sherwin-Williams paint for spraying.
To thin Sherwin-Williams paint for spraying, dilute it using water. To do this, add 1/2 cup of water per gallon of paint. It’s also recommended to reduce the size of the sprayer’s tip and avoid spraying in one spot for too long.
By doing this, you are going to get the type of results that are required.
Sometimes, the orifice of the Sherwin-Williams paint sprayer is already going to be cut too wide.
If this happens, your best approach is to apply across a wider surface and make sure to further spread the paint once it’s on the surface.
This article will look at what is required when It’s important to understand the steps to follow when thinning Sherwin-Williams paint for spraying.
Table of Contents
Best Paint Sprayer (EDITOR’S CHOICE)
No products found.
Steps For Thinning Sherwin-Williams Paint For Spraying
1. Reduce Size of the Tip
This is a simple fix.
You are going to look at the sprayer and make sure the size is reduced. If less paint is coming out, this will automatically thin it out.
Sometimes, a person will cut the orifice too much and this increases the size of the opening. You have to avoid this by reducing the size of the tip as much as possible.
Take your time to cut a little bit and see if that helps.
If you have already cut the tip then this is not a step you can apply. It’s then best to move on to the next step.
2. Don’t Spray In One Spot
This is one of the best ways to thin out spray paint from Sherwin-Williams.
What you are going to do is avoid running the paint sprayer in one spot for too long. This is how you end up getting blobs that are difficult to spread later.
Just run the sprayer across a wider surface and do it consistently. When you do this, you will see far better results.
It’s commonly assumed the reason Sherwin-Paint is too thick is due to the formulation. However, sometimes it is far simpler than this and it comes down to how you are painting the surface.
Look into this and make sure you are careful when it comes to spraying the paint.
3. Pour Water Into Paint To Dilute It
When other steps don’t work, it’s time to change the formulation.
To do this, you are going to pour the paint and then add 1/2 cup of water per gallon of Sherwin-Williams paint.
This is going to help thin out the paint without ruining its finish.
Take your time during the process and make sure you are careful to measure out how much water is added to the paint.
When trying to thin out Sherwin-Williams paint, you will have to use clean water. Add the water slowly and ensure it is mixed properly.
This is how you are going to get the texture that you are looking for.
Do I Need To Thin Sherwin-Williams Paint for A Sprayer?
You do not need to thin Sherwin-Williams paint for a sprayer. The paint is marketed as being ready-to-go. For some surfaces, you will have to dilute the paint using 1/2 cup of water per gallon of paint.
It’s best to go through each step to see what works best for you.
Sometimes, it is going to come down to how you apply the spray paint rather than the formulation itself.
Be patient with this step and make sure you are regularly checking on the paint. This is how you are going to see good results.
Final Thoughts
These are the main steps to follow when thinning Sherwin-Williams paint for spraying.
When thinning Sherwin-Williams paint for spraying, it’s best to dilute the formulation. To do this, add a 1/2 cup of water per gallon of Sherwin-Williams paint. You should also reduce the tip of the sprayer and apply the paint across a wider surface area. This will ensure there are no blobs to deal with.
It takes a bit of time when you are doing this. Be patient and you will see good results with Sherwin-Williams paint.
For the average person, the paint should be fine. Only when you are sure it is not going to provide the finish that you want is it smart to consider thinning the spray paint.
Read More About Paint: