Does the toilet seat keep falling down?
This is a frustrating issue to deal with and it can frustrate property owners. You will attempt to put the toilet seat up and it will continue dropping back down as if nothing is holding it in place.
This will make you wonder why the toilet seat won’t stay up.
A toilet seat won’t stay up because it’s installed too far back, is incompatible with the toilet, or there’s a loose screw. It’s recommended to adjust the toilet seat’s placement, tighten the screw, and then attempt to use it. This should fix the problem if the toilet seat is compatible.
This is why it’s important to make sure you are always buying compatible toilet replacement parts. Just like the toilet bowl, you have to be sure with the toilet seat too.
This article will take a look at some of the reasons a toilet seat won’t stay up.
Table of Contents
Best Toilet Snake (EDITOR’S CHOICE)
No products found.
Reasons Toilet Seat Won’t Stay Up
1. Installed Too Far Back
When learning how to fix a toilet seat that won’t stay up, it’s important to look at the seat’s alignment.
This will shed light on what the underlying problem is.
For example, a toilet seat might be installed too far back. This causes the toilet seat to not remain in place when it is lifted. Instead, the toilet seat will keep falling because it doesn’t have anything to stand on.
The goal here is to take off the toilet seat by loosening the screws. You will then re-align the toilet seat in its rightful spot and tighten the screws into place.
This should help fix the problem if it was caused due to the toilet seat being too far back.
2. Incompatible Toilet Seat
This is common with replacement toilet seats.
You will attempt to go to the store and pick out any toilet seat. This might seem like a good idea at the time but it is important to note, toilets seats are not universal. This means any toilet seat you use has to be an exact match.
If there are differences in terms of sizing, it will have an impact on how the toilet seat works. This includes how it stands up when you start using the toilet.
A lot of people don’t realize this until it is too late and the toilet seat won’t stay up.
Your goal here should be to look at the toilet’s model number and then use this information to find a good match.
3. Loose Screw
It is possible the screws that are holding the toilet seat up have become loose.
In a situation such as this, you will want to take a screwdriver and tighten all of the screws. If you notice one of them being loose, it is likely the root cause of the toilet seating not staying up whenever you use it.
The goal is to make sure the screws are not only tight but is also undamaged. You don’t want a situation where the screw has permanently loosened because of rust.
There’s a lot of water around the toilet, so these issues do exist depending on how old it is. Be careful and pay attention to the screws.
4. Not Level
There are situations where the toilet seat won’t be level.
This is a serious concern because the toilet seat could also spring a leak depending on how the water starts to sit inside the bowl. You don’t want a situation where the toilet seat doesn’t sit flush with the toilet bowl.
This can not only release water but also odors that are dangerous.
It is important to make sure the toilet seat is level when you are looking around. If not, it is likely time to reposition the toilet seat and then tighten the screws.
5. Toilet Seat Cover Is In The Way
Your goal should be to take the toilet seat cover off right away.
If you do have a toilet seat cover, this is not the time to have it in place. In a lot of situations, it is the cover that ends up making it hard for the toilet seat to stay up.
What is the reason for this?
It has to do with the weight of the toilet seat cover pushing down on the seat itself. This can create enough pressure where the toilet seat doesn’t have enough strength to hold itself up.
These are the reasons your toilet seat won’t stay up.
The reasons a toilet seat won’t stay up can involve it being installed too far back, a screw being loose, or the seat itself not being compatible with the toilet. It’s recommended to start by tightening the screws and making sure the seat matches the toilet’s model number.
This is a good place to start and should rectify the problem.
Read More On Bathrooms: