Vinyl planks are an integral part of modern bathrooms but it’s also important to know how to set this type of flooring.
You will want to make sure it settles nicely and looks the part.
For this to happen, you will want to think about how to put vinyl plank flooring around a toilet.
To put vinyl plank flooring around a toilet, start by completing the staggered design up to the drain hole. Once done, use a cutter to trim the plank based on the edges of the hole, let the plank sit in place, and then secure it.
You will want to be careful while doing this and make sure the drain hole is not covered by one of the vinyl planks.
Take as much time as you need to do this right.
Here is more on what you have to do when installing vinyl plank flooring around the toilet.
Best Vinyl Planks (EDITOR’S CHOICE)
- Nexus Wood Look Floor Planks: Transform your floor for a low cost and no hassle with the Nexus Vinyl Floor Planks. Our planks...
- Dimensions: Each plank measures 6 inches x 36 inches and 1.2mm thick. There are 60 planks per box, which will cover 90 square...
- Peel ‘N’ Stick: The Nexus Floor Planks feature easy DIY installation. Simply peel and stick the Nexus planks to a flat...
Last update on 2023-03-22 / Affiliate links / Images from Amazon Product Advertising API
Tips For Putting Vinyl Plank Flooring Around Toilet
1. Start By Maintaining The Same Pattern
Putting flooring around a toilet flange is a difficult task.
What you are going to do is start setting the vinyl planks from the other end of the bathroom. This will help create the staggered pattern needed to make sure the bathroom flooring looks neat.
With this pattern in mind, you are going to take it up to the drain hole.
The purpose is to make sure it looks seamless when you are ready to begin shaping the vinyl planks around the drain hole.
At one point, the last vinyl plank is going to be half on the subfloor and half over the hole. This is when you are going to look to secure the other planks and then begin working on this one that sits over the drain hole.
2. Use Cutter To Trim Around The Drain Hole
You are going to want to take out a cutter for this step.
You can use any type of cutter that will offer enough control to cut the shape of the drain hole into the vinyl plank.
This will depend on how much of the vinyl plank is covering the drain hole.
In general, the purpose of using the cutter is to make sure the drain hole is not covered by the plank. This means you will want to cut as much of it as you can while ensuring the plank does not split into half.
This will take a bit of time to do but it will be well worth the effort when the plank is in place.
3. Let The Plank Settle Flush Against The Subfloor
You are now going to want to secure the vinyl plank against the subfloor.
This is the half that is going to be sitting on the subfloor and nothing else.
For the part that has been cut, you are now going to secure it along the sides. This is only going to happen when you are certain the plank is flush against the subfloor.
There should not be a gap between the plank and the subfloor whether it is near the drain hole or anywhere else in the bathroom. It should always be flush.
4. Secure The Flooring
The last step is to secure the flooring.
You are going to do the same as you have been doing for the rest of the vinyl plank flooring in the bathroom.
Installing vinyl plank flooring around a toilet is a frustrating task if you are not willing to measure everything and ensure the cutter is ready whenever it is needed.
You will have to do a bit of cutting and that is something you can do with clarity as long as you are paying attention to the hole.
If you need multiple pieces to do this then that is the direction you are going to want to go in.
Final Thoughts
These are the tips that matter when it is time to install vinyl plank flooring around a toilet.
When it is time to install vinyl plank flooring around a toilet, look to begin with the same pattern as the rest of the bathroom. Once over the hole, use a cutter to make sure the hole is not covered. Next, secure the flooring to the subfloor from the sides.
This is how you are going to get the planks to sit still even when they are around the drain hole.
As mentioned before, this is not a job that is going to be done in a few seconds. You will need to measure everything and make sure the planks are sitting flush against the subfloor before you secure them.
Read More On Bathroom: