The Washing Machine Drain Overflows By Wall Where Discharge Hose Goes In! (Fixed)

A washing machine is supposed to drain quickly and efficiently.

The water goes through, enters the drain pipe, and exits without too much fuss. However, this is assuming everything is running the way it needs to and you get the results you’re looking for.

One issue people notice is when the washing machine drain overflows by the wall where the discharge hose goes in.

If the washing machine drain overflows by the wall where the discharge hose goes in, the most likely reason is a clog in the hose. To fix the issue, clean the overflow water by moving the machine forward, access the drain pipe, use a drain snake to push into the pipe, unclog it, and re-test the appliance.

This will make sure the washing machine starts draining the way you want it to.

A common mistake people make is to keep using the washer in this condition. The drain pipe is going to get worse when you do this and the puddle of water will also worsen to the point of doing serious damage.

This guide is going to show you more about what to do if the washing machine drain overflows by the wall where the discharge hose goes in.

Best Washing Machine Cover (EDITOR’S CHOICE)

No products found.

How To Fix Washing Machine Drain Overflows By Wall Where Discharge Hose Goes In

1. Pull The Washing Machine Forward

If the washing machine drain pipe is clogged, this means you are likely going to start noticing water damage near the wall.

This happens as the drain begins to overflow.

Do not panic.

The first thing you are going to want to do is shut off the main water supply running to the washer. You do not want more water entering the machine or leaving it. Turning off the water supply will help you.

With this in mind, you are now going to pull the washer forward.

This is going to give you complete access to the drain pipe.

2. Access The Drain Pipe

The drain pipe is designed to help direct the wastewater out into the main drainage system.

In a working setup, this is going to be straightforward and the water will go where it needs to be.

However, when the drain pipe gets clogged due to dirt or grime, this is when the water starts flowing back into the appliance or out of the pipe.

You will begin to notice water around the washing machine when this occurs.

It is also good to wipe the excess water as soon as you see it near the pipe. Do this right now so you don’t need to worry about it later.

3. Use A Drain Snake To Unclog The Pipe

Now it is time to start focusing on unclogging the washing machine drain pipe.

When it comes to washing machine drain overflow solutions, using a drain snake is one of the better options available to you.

You are going to use a drain snake to unclog the washing machine drain by pushing it deep into the hole. This is going to allow you to get to the obstruction in the drain as soon as you want to.

4. Re-Test The Appliance

When you are certain the drain is free of the obstructing debris, it’s time to put things back to how they were.

This includes pushing the washing machine back after you have cleared the water around the drain.

When the washing machine is pushed back, you can turn the water supply back on too.

It is now time to test the washer.

The best option is to run a hot water wash cycle with an empty load. Just let the washer run through the cycle and see if the water overflows again.

In most cases, it will not and you will be good to go. If it does overflow, you will need to redo the process.

Final Thoughts

These are the main tips you are going to need if the washing machine drain overflows by the wall where the discharge hose goes in.

If the washing machine drain overflows by the wall where the discharge hose goes in, it is due to a clog in the drain pipe. To get rid of the clog, start by pulling the washer out, cleaning the excess water on the floor, pushing a drain snake into the drain, and removing the clog.

This is going to take care of the problem and ensure your washing machine begins to work as it did before the clog appeared.

Do not rush this process and always make sure to turn off the water supply when you are working on this part of the washing machine.

Here’s More On The Washing Machine:

  1. How To Fix Dropped Washer Drum
  2. How To Set Up Draining For A Washer
  3. Steps To Stop Grey Stains On Clothes In Washer
  4. How To Move Dryer Onto A Washer
  5. How To Wash My JanSport Bag In The Washer
  6. Why A Second Floor Laundry Room Is No Good