The Washing Machine Drum Wobbles! (Fixed)

When the washing machine is running at 100%, it is normal for the drum to stay in a relatively stable position with a full load.

This is something the washing machine should do as it goes through various cycles during a washing session.

While this is true, it is possible for problems to arise with the washing machine drum. This includes a situation where the washing machine drum wobbles.

If the washing machine drum wobbles, the most likely cause is a damaged bearing, suspension ring, or shock absorber. To fix this issue, unplug the machine, access the drum, tighten the locknuts, and inspect the various components for damage. Replace the one that’s damaged.

Each situation is going to be different due to how many components work in stabilizing the washing machine drum.

When one of them loosens, the washing machine drum can wobble.

This article is going to take a look at what to do when fixing a wobbling washing machine drum and what tools to incorporate in the process.

Best Cleaner For Washing Machine (EDITOR’S CHOICE)

Last update on 2024-07-12 / Affiliate links / Images from Amazon Product Advertising API

How To Fix Wobbling Washing Machine Drum

1. Unplug The Washing Machine

If the washing machine drum is loose and you are hearing a banging noise, this is likely due to one of the components coming out.

You will want to take the time to immediately stop using the washing machine. If you continue using the washing machine, you will likely damage the surrounding components too.

It’s best to unplug the washing machine so you can pull it out at this point.

Doing this is going to give you appropriate access to the washing machine while also knowing how to access to washing machine’s drum. This is the only way to fix the loose washing machine drum.

You will also want to pay attention to how loose the washing machine drum is. Sometimes, it might be a little loose and only a tightening is going to get the job done.

Regardless of what the problem is, start by unplugging the appliance and pulling it out.

2. Flip The Washing Machine Over

You are going to have to get to the washing machine drum.

Each machine is built differently, which means you are going to have to look at the layout of the machine. This is easier if you have a manual to see how you can access the washing machine drum.

The main issues that you deal with when there is a loose washing machine drum have to do with a damaged bearing, suspension ring, or shock absorber.

These are all going to be underneath the drum.

As a result, you will want to flip the machine over to take a look at what is going on. This is assuming the machine has a traditional design.

Some will provide access from the side and it is best to look through the manual to see how it applies to your situation.

3. Inspect Damage On Surrounding Components

You are now going to have access to the surrounding components.

This is a sign that you can begin to look at the bearings, suspension rings, and/or shock absorbers to see what is going on.

It is best to inspect each part individually.

You will want to make sure nothing is damaged and/or loose. If the part is simply loose, you will want to tighten it using a wrench.

This is going to make sure the washing machine does not continue to wobble as you use it.

4. Replace Any Damaged Part And Tighten The Locknuts

The last step is to replace any damaged part that is visible to you when the washing machine is opened up.

You will want to make sure those parts are switched out as soon as possible.

Assuming everything has been switched out and/or tightened, it is time to look at the legs. You will want to tighten the locknuts that are holding the legs and make sure they are set at the right height.

Sometimes, this can be the reason for the washing machine drum to wobble a lot.

Final Thoughts

Look into these tips if the washing machine drum wobbles.

If a washing machine drum wobbles, the most likely reason has to do with a damaged suspension ring, shock absorber, and/or bearing. To fix this issue, unplug the machine, flip it over, access the washing machine drum, and replace any damaged parts. Once done, tighten the locknuts using a wrench.

This is how you are going to make sure the washing machine drum stops banging and/or wobbling.

Take your time inspecting the washing machine drum and make sure to tighten everything. Sometimes, it is just a loose bolt that needs to be tightened. Once you do that, it will begin to work as intended.

Here’s More On The Washing Machine:

  1. How To Fix Broken Washing Machine Agitator
  2. How To Drain A Washing Machine