Whirlpool Dishwasher Clean Light Blinking 7 Times (Fixed)

It can be interesting to see the Whirlpool dishwasher’s light start flashing. You are going to assume this is a sign there is something wrong with the appliance and that might not be the reason.

It could be something as simple as the machine needing to be reset before you use it.

This is often the case if the Whirlpool dishwasher clean light is blinking 7 times.

If the Whirlpool dishwasher clean light is blinking 7 times, it’s time to reset it. To do this, open the dishwasher door slightly, press Hi Temp Scrub + Energy Saver Dry + Hi Temp Scrub + Energy Saver Dry (in that order), close the dishwasher door, and press the Cancel button.

Doing this is going to ensure the dishwasher’s clean light stops blinking and it works out as you want it to.

This article is going to take a look at the main details of why a Whirlpool dishwasher clean light is blinking 7 times and what to do about it.

Best Cover For Dishwasher (EDITOR’S CHOICE)

No products found.

How To Fix Whirlpool Dishwasher Clean Light That’s Blinking 7 Times

1. Open The Dishwasher Door Slightly

Your first step is going to be to go to the dishwasher door.

If it is closed, you are going to want to open the dishwasher door slightly. It does not have to be completely open but that is fine too.

Just make sure the door is not latched before moving on to the next step.

This is going to give you access to the buttons on top of the door, which is how you are going to begin working on the settings to reset the Whirlpool dishwasher and make sure the clean light stops blinking.

You will want to be thorough while doing this to make sure you are on the right path.

If there is something blocking your ability to open the dishwasher door, it is best to push it out of the way as soon as you can.

whirlpool dishwasher clean light blinking 7 times

2. Press “Hi Temp Scrub + Energy Saver Dry + Hi Temp Scrub + Energy Saver Dry”

Now, this is the most important part of the process.

You are going to want to look at the buttons on top of the Whirlpool dishwasher door.

These buttons are important because they are going to have to be tapped in the right order to make sure the Whirlpool dishwasher resets as intended.

To do this, you are going to want to press Hi Temp Scrub + Energy Saver Dry + Hi Temp Scrub + Energy Saver Dry.

If you do it in this order, the Whirlpool dishwasher is going to be primed for the next step.

3. Close The Dishwasher Door

When you have pressed the buttons, it is now time to close the dishwasher door.

You will want to make sure the dishwasher door is pressed in and it does click. The sound should come when you close it or it is still loose.

You will want to make sure it has been latched into place.

This is important as it is the only way you are going to get the dishwasher door to the next step without causing it to keep blinking.

whirlpool dishwasher clean light blinking 7 times

4. Press Cancel Button

You will want to make sure to press the cancel button.

A lot of people make this mistake when it comes to the process and assume that just pressing the buttons is enough to get the job done.

This is not enough and you will want to make sure to do things the right way.

This includes pressing the cancel button.

This is going to only happen after you have closed the dishwasher door. Doing this will ensure the Whirlpool dishwasher resets and you are good to go.

If you look at the blinking light, it will now be gone and you are going to have the chance to look at other options available to you.

If this does not work, the main issue likely has to do with the sensor. This is causing the light to blink and it might have to be replaced.

It is best to get a professional to replace the sensor when this is the case.

Final Thoughts

These are the steps to consider if the Whirlpool dishwasher clean light is blinking 7 times.

if the Whirlpool dishwasher clean light is blinking 7 times, it’s best to reset the appliance. To do this, you will open the door slightly, press Hi Temp Scrub + Energy Saver Dry + Hi Temp Scrub + Energy Saver Dry (in that order), close the door, and then press Cancel.

This is going to ensure the blinking light on the Whirlpool dishwasher goes away and you are good to go.

Read More On Kitchens:

  1. Reasons Bosch Dishwasher Door Keeps Closing
  2. Are KitchenAid Dishwasher Handles Easy To Change?
  3. Does Bone China Wash In The Dishwasher?
  4. How To Manage Rinse Aid Light On GE Dishwasher
  5. Will A Kitchen Demand A Dishwasher?