The way a dishwasher door opens is important.
A functional dishwasher door is going to settle at 90-degrees and remain like that until you close it. When there is something wrong with the door, it tends to open all the way causing it to press against the floor.
You will not want this to happen and it can also damage the flooring as soon as the door settles in.
This is why it’s important to figure out why a dishwasher door opens too far and what to do about it.
If a dishwasher door opens too far, this means the spring is too loose or broken. To fix the issue, unplug the dishwasher, pull it out, and inspect the springs on the door. These springs are located on the sides of the door near the bottom. It’s best to replace both springs to repair the issue.
You can also attempt to take off the spring and re-install it. This comes down to whether or not there is structural damage to the spring and/or surrounding components.
For the most part, it is far better to replace both springs to get a fresh start. These are affordable and easy to do on your own.
This article will explain more about what to do if a dishwasher door opens too far and what works best when it’s time to replace the springs.
Table of Contents
Best Dishwashing Soap (EDITOR’S CHOICE)
No products found.
Steps To Follow If Your Dishwasher Door Falls Open
1. Disconnect The Dishwasher
To fix an overextended dishwasher door, you will need to start by unplugging it.
This is to avoid dealing with any type of electrical current and/or related issues. This is a safety measure that will also make it easier to pull the dishwasher out when you want to fix the underlying problem.
Just disconnect the dishwasher and then slide it out.
This will allow you to see what’s going on with the dishwasher door springs causing the door to become overextended.
2. Inspect Both Door Springs
If a dishwasher door opens too far, you will need to look at the two springs running on the sides of the door.
These springs are responsible for keeping the door taut so it does not overextend past the 90-degree point.
What will you have to do?
You will need to see whether or not there is damage to the dishwasher door springs. If there are, you will then need to move forward and consider tightening or replacing the dishwasher door springs.
For the most part, it is best to replace the dishwasher door springs. This is especially true if they are damaged.
3. Attempt Tightening The Springs
If you want to tighten the dishwasher door springs, you will have to unscrew them. This will allow the springs to come out on both sides.
Be patient while doing this and make sure to keep the fasteners on hand as you will need them later.
Just wipe the springs and then place them back into place.
Tighten the fasteners and then test the dishwasher door again.
If it doesn’t open too far, this means the problem is fixed. If it continues to do the same thing, you will have to replace both springs with compatible alternatives as soon as you can.
4. Replace The Springs (If Necessary)
This is the most recommended fix when it comes to a dishwasher door that opens too far.
The springs are likely damaged or too loose. Tightening them might work for a little while but most springs become compromised at this stage.
So, what are you going to do?
You will have to replace both springs.
Take them out and make sure to find compatible dishwasher door springs sold by the brand. Most manufacturers will have replacement parts available such as dishwasher door springs.
Make sure to use those to get the proper fit.
These are the things to focus on when a dishwasher door opens too far.
If a dishwasher door opens too far, you will want to unplug the appliance and pull it out to inspect both springs. These dishwasher door springs are located on the sides of the door near the bottom. To fix the issue, replace the dishwasher door springs with a compatible alternative.
This is the best way to get on top of this problem before it ruins your flooring or the appliance.
It’s common for this to happen with older dishwashers.
The goal remains to pinpoint what is wrong with the dishwasher door springs. Once you do this, it will become easier to fix the problem. This includes tightening the dishwasher door springs or replacing them outright.
Read More On Kitchens:
- Advice To Break In A New Dishwasher
- How To Drain Dishwasher Through The Floor
- How To Fix A Dishwasher Door That Is Falling Open
- Dishwasher Doesn’t Work After being Stopped Mid-Cycle
- Should A Dishwasher Door Be Kept Open After Cycle?
- Can You Safely Put Plastic In A Dishwasher?
- What Can Be Used Instead Of Dishwasher Tablets?