A jetted tub has to be well-maintained for it to be a functional part of the space.
It’s common to forget about cleaning the jetted tub and assuming it will be okay. Even if it is not being used all the time, you still have to remain on top of things for it to be a valuable feature in your bathroom.
It’s important to learn how to clean a jetted tub with OxiClean. This is the best way to make sure the jetted tub looks as beautiful as it needs to be.
To clean a jetted tub with OxiClean, start by filling the tub with hot water. Now, pour a cup of OxiClean and let the jets run for 10-15 minutes. Once drained, fill the tub with cold water and let it sit for 5 minutes.
This should help clean the jetted tub and make sure it looks the way you want it to.
A lot of people forget to clean the jetted tub and that takes away from its beauty. Don’t let this happen and make sure to stay focused while completing the cleaning process.
This article is going to take a look at how to clean a jetted tub with OxiClean and what to consider during the process.
Table of Contents
Best Cleaner For Jetted Tubs (EDITOR’S CHOICE)
No products found.
Steps To Clean Jetted Tub With Oxiclean
1. Fill Tub With Hot Water
You will want to fill the tub with hot water.
This is going to help OxiClean do its job as soon as it’s poured in. You don’t want to start pouring the OxiClean in without having water inside.
Why is this not a good idea?
The OxiClean is not going to clean the jets as well as it can when mixed with warm water. You want to let the water and OxiClean mix as that will help cover the jets and the rest of the tub’s surface.
2. Pour A Cup Of OxiClean & Wait 10-15 Minutes
When you are done filling the jetted tub with warm water, it’s time to pour a cup of OxiClean in.
The goal now is to let the warm water and OxiClean mix.
This is going to help cover the entire jetted tub and make sure the mixture gets into the jets too. This is how you are going to ensure all of the residue and grime that is present is cleaned.
Be diligent when it comes to how you measure the OxiClean as that is how you are going to get the measurement right.
3. Drain The Tub
You are now going to drain the tub.
You will only have to wait 10-15 minutes before doing this.
This amount of time is more than enough to make sure the jetted tub has been cleaned using the OxiClean. You will not have to do more when it comes to fixing the tub and making sure it’s as clean as it needs to be.
Keep this in mind when it comes to ensuring the tub is in good condition moving forward. Always drain the tub patiently and make sure nothing is left behind before moving on to the next step.
4. Fill The Tub With Cold Water
When the jetted tub has been drained, it’s time to fill it again.
Now, you are going to fill it with cold water.
The goal here is to make sure the OxiClean residue is removed from the jets. This is where the cold water comes in handy. It is going to help rinse the jetted tub and make sure it is as clean as it needs to be.
Keep this in mind when you are rinsing the jetted tub. Don’t use warm water for this step.
Be patient while doing this and also make sure to wait.
5. Wait 5 Minutes Before Draining The Tub
You will only have to wait 5 minutes after the cold water has been added to the jetted tub.
This will help loosen the OxiClean that is still present on the jets or the surface of the tub. Once you feel the time has run out, it’s okay to drain the tub.
Final Thoughts
These are the main steps on how to clean a jetted tub with OxiClean and how to make sure it works out as intended.
To clean a jetted tub with OxiClean, it’s best to fill it with warm water. Now, pour in a cup of OxiClean and wait 10-15 minutes. Drain the tub and then fill it with cold water. Wait another 5 minutes and drain the tub to complete the process.
If you want, you are welcome to wipe the surface with a dry cloth to get rid of any lingering residue that is noticeable to the naked eye.
This is down to preference and OxiClean should be able to get the job done on its own.
Read More On Bathrooms: