The rinse aid light has to be kept in check to make sure the GE dishwasher is fully functional.
It’s common to ignore this light and assume everything is working as intended. However, there are situations when the rinse aid light is going to make you look twice.
This includes situations when the GE dishwasher low rinse aid light stays on.
If the GE dishwasher low rinse aid light stays on, this means the adjuster has to be reset. To do this, open the rinse aid door, turn the adjuster clockwise, and re-test the appliance. If necessary, unplug the dishwasher for a few hours to reset it.
It is possible the rinse aid light turned on for no reason.
If this happens, resetting the GE dishwasher is going to get rid of the light. However, you should always start by seeing if the adjuster has to be turned or not.
Turning it clockwise will take care of the problem for the most part.
Here is a breakdown of what you need to do when the GE dishwasher low rinse aid light stays on.
Table of Contents
Best Countertop Dishwasher (EDITOR’S CHOICE)
No products found.
How To Fix GE Dishwasher Low Rinse Aid Light That Stays On
1. Open The Rinse Aid Door
The first step is to open the rinse aid door.
This is going to give you access to the adjuster.
The reason you want to go straight to the rinse aid door is to make sure you are checking the level before doing anything else.
It’s possible an adjustment was done where you turned the adjuster counter-clockwise. This immediately decreases the level, which then is going to cause the light to stay on.
It is important to be aware of this and make adjustments on the go.
If you don’t, it’s possible the light is going to stay on. It is also possible the light will stay on even when the adjuster is set right.
If that is the case, you will want to take a look at the last step in this guide.
2. Turn The Adjuster Clockwise
This is the most important step in the process.
What you are going to do is open the rinse aid door and look at the adjuster in front of you.
The adjuster has a simple mechanism.
You can turn it clockwise or counter-clockwise. However, the way you turn it is important when it comes to making sure the level is right based on what the light is telling you.
For this case, you are going to turn it clockwise to increase the level.
This is going to make sure the light turns off.
3. Re-Test The Dishwasher
Now you are going to take the time to re-test the dishwasher.
This includes seeing if the light has turned off or is still on. If it remains on, you might have to open the rinse aid door and see if it needs to be turned the other way.
This is going to depend on what is happening in front of you.
A lot of people don’t think about this and only turn it clockwise. However, the light might be malfunctioning, so try turning it both ways to see what works.
4. Turn Off The Dishwasher For A Few Hours (If Necessary)
This is a step that is not always necessary.
It comes down to what happens when you turn the adjuster clockwise.
If it is still the same as before, you are going to want to reset the GE dishwasher. To do this, you are going to unplug the GE dishwasher and let it sit for at least a few hours.
The reason for doing this is to let the GE dishwasher’s settings reset.
Sometimes, the constant adjustments you make can cause the light to malfunction.
This is not always the case but it is a good step to take if the light is still on.
Final Thoughts
These are the tips to follow if the GE dishwasher’s low rinse aid light stays on.
If the GE dishwasher low rinse aid light stays on, the best step is to open the rinse aid door, turn the adjuster clockwise, and re-test the dishwasher to see if the light is gone. If the light is still there, reset the GE dishwasher by unplugging it and waiting 2-3 hours.
This is going to make sure the light resets too.
It is important to note that the sensor might be damaged. This is rare but it is often going to require a specialist to take a look at what is going on.
Always go through the steps in this guide to see if the light goes or not.
Read More On Kitchens: