When you look into a kettle, it should be crystal clear.
There is nothing worse than using an unclean kettle but it can happen depending on how long the kettle has been unused.
You could have a situation where there is green mould in the kettle.
It is not an ideal situation and that is why you are going to want to act fast.
To remove green mould in a kettle, you will want to start by wiping the surface using a clean cloth, scrub the mould, boil water in the kettle, and then wipe the surface again until the mould is gone.
It is not easy to look at a kettle that is in this state.
Please note that you should not use water that has been boiled in the kettle until it is cleaned. This is a must as it might not be safe for you to use.
This includes drinking or using the water for any other reason.
Here is a look at what you have to do to get rid of green mould in a kettle.
Best Kettle (EDITOR’S CHOICE)
No products found.
How To Remove Green Mould In A Kettle
1. Wipe The Surface Using A Cloth
Mold in a kettle isn’t ideal.
You will want to make sure it does not spread nor does it get into the water that is boiled.
As a result, you will want to act fast.
To do this, the best solution is to wipe the surface using a clean cloth. You will want to make sure the surface has been set up to the point it is only going to consist of hard mould that does not come off easily.
Be diligent when you are wiping with a clean cloth to take off as much of the loose residue as possible.
This will be useful when you begin to scrub off the rest of the green mould.
Please do not rush this process as that is going to make it harder later in the process.
2. Scrub Off The Green Mould
To clean mould in a kettle, you are going to have to find an abrasive cloth.
Why is an abrasive cloth a must?
The purpose is to have increased friction that is going to allow you to work on the green mould. Remember that it is not going to be easy to take off, which means a simple cloth won’t do.
This is why the second step is going to include a more abrasive cloth that has a bit of friction to it.
You can also use anything else that will allow you to dig into the kettle and eliminate the green mould.
3. Boil Water In The Kettle
Now, you are going to pour water into the kettle.
The purpose of doing this is to kill the mould.
You will initiate this process by boiling water in the kettle as you normally would. This is going to help tackle the residue that is still in the kettle.
When the water has been boiled, let it sit for a few minutes.
You can even swish it around inside the kettle and then drain it. This will ensure the mold loosens further.
The more time you take with this, the better your results are going to be.
4. Wipe The Mould Off
The last step is going to be to take a clean cloth again and wipe.
The reason for wiping now is to work on the loose mould that is sitting in the kettle. You will also want to make sure to clean the rest of the kettle while doing so.
This gives you a fresh start and ensures bacteria does not get into places that you might have missed.
It is also important that you flush the kettle with clean water again.
This is going to ensure everything has been removed from the kettle and you are good to go.
Look into these steps as you are getting rid of green mould in a kettle.
To get rid of green mould in a kettle, you will want to start by wiping the surface with a clean cloth, scrubbing off the mould, boiling water, draining the kettle, and then wiping it again. This should help get rid of the mould in the kettle.
When you are doing this process, you will want to be as detailed as possible.
This means looking at the entire kettle while doing so.
Don’t forget that sometimes you are going to only look at one part of the kettle without realizing the other side also has residue on it.
Most people will look inside the kettle when there can be mould on the outside too.
Clean everything and get it right the first time around.
Read More On Home Fixtures: