Getting the dryer on top of a washer is a difficult task.
You will need to consider multiple variables including where the connection points are, how the dryer will sit on top, and where the leverage is.
These are essential details to consider if you want to get the dryer connected and centered on top of the washer in a stacked setup.
It’s best to learn how to lift the dryer on top of the washer by yourself by going through the important steps.
To lift a dryer on top of the washer by yourself, start by placing the dryer on a flat table. Next, tilt the dryer so its edge sits on top of the washer’s edge. Once done, push the dryer onto the washer and straighten it. Now, connect the wires and secure everything into place.
For the most part, this job should be done by two people when it is time to lift the dryer onto the washing machine.
However, if you don’t have the luxury of this option, it’s best to use a table to gain leverage. This leverage is how you are going to push the dryer on top of the washer without using too much energy.
This guide will show you how to lift a dryer on top of the washer by yourself in seconds.
Table of Contents
Best Washing Detergent (EDITOR’S CHOICE)
No products found.
Steps On How To Lift Dryer On Top Of Washer By Yourself
1. Place The Dryer On A Flat Table
Stacking a dryer on top of a washer alone is all about creating leverage points.
What does this mean?
You are going to look to place the dryer on top of a flat table. This can be done by tilting the dryer and getting it to sit on top of the table.
If necessary, you can always invest in moving straps, which will wrap around the dryer allowing you to lift it onto the table.
2. Tilt The Dryer Onto The Washer
When the dryer is on the table, you will want to make sure the washing machine is in the right spot.
This means it should be plugged into the plumbing and the circuit as required.
You will now want to push the table near the washer.
It should be close enough that you can tilt the dryer onto the edge of the washer before pushing it forward.
This will allow you to use the leverage as a way to push the dryer onto the washer.
3. Secure The Dryer
Now, you are going to look to secure the dryer.
Each manufacturer has a different installation kit when it comes to stacking the dryer on top of the washer.
You will want to go through the manual to figure out how this has to be done.
In general, the kit is going to come with brackets that will go on top of the washer. You can use these to slide under the dryer and then lock the appliance into place.
Take the time to test the dryer and move it around to see whether or not it will fall.
Do not use either appliance until you are sure the dryer is secure. Otherwise, it will begin to move when the washing machine vibrates.
4. Test The Appliances
The last step is to test the appliance when everything has been connected.
Your goal is to see whether or not the stacked setup is working as it is designed to. This means checking the plumbing and how it manages to handle a load.
You will want to go through the cycle and keep tabs on any changes that need to be made.
This includes how the vibrations are handled in the stacked setup.
Final Thoughts
This guide is all you need as you figure out how to lift a dryer on top of a washer by yourself.
To lift a dryer on top of a washer by yourself, start by setting the dryer on top of a flat table using moving straps. Once done, push the table closer to the washer, tilt the dryer onto the washer’s edge, and push up. Now, secure the dryer using the accompanying installation kit, and test the appliances.
This is going to take a bit of time depending on the installation process.
Always make sure the dryer does not move when it is on top. This is important.
If it budges, you are going to have serious concerns about whether or not the dryer is going to withstand the shaking from the washer below.
Here’s More On The Washing Machine: