When the washer starts acting on its own, this is a point of concern.
This can also become a safety risk depending on how often it’s happening and when it’s happening.
You will want to get to the bottom of things as soon as you can.
This is a real concern when you start noticing that the LG washer turns on by itself.
if the LG washer turns on by itself, the likely cause has to do with the network button. It is dealing with excess condemnation where moisture enters the button and causes it to malfunction. The best way to fix this is to inspect and replace the button.
If you believe it has to do with the firmware for the newer LG models then it is best to reset the LG machine and see if that helps.
Sometimes, the settings can go haywire depending on how the washing machine was used. This is rare but it is never a bad option to reset the LG washer and let it sit for a few minutes before starting it again.
Here is a breakdown of what you are going to do if the LG washer turns on by itself.
Table of Contents
Best Washing Machine Cleaner (EDITOR’S CHOICE)
No products found.
Steps To Follow If The LG Washer Turns On By Itself
1. Check The Network Button
Your first step is to see where the issue lies.
For the most part, it is going to be the network button that is causing these issues to occur. This button is responsible for how the machine works and it will begin to misfire if there is moisture inside.
At first, you are not going to notice this as the machine will continue to work well.
However, you are going to notice it starts to act on its own. This is when it will begin to turn on or even turn off without warning.
This is not a good sign and it means there is something wrong with the network button.

2. Assess For Moisture
If the network button is damaged, you are going to have to figure out what to do about it.
The most likely reason for it not working has to do with condensation.
This is when there is excess moisture in this part of the machine and it can happen due to the setting it is in.
If you notice condensation, this is going to be what is impacting the network button and is causing it to falter
It is best to look into this when you are figuring out what your options are.
3. Reset The LG Washer
You will want to also consider the network settings and/or the firmware in the LG model.
This is going to depend on the LG washing machine you are using and how it works. If it is a newer model, this is likely going to be a problem that is causing the washer to act up.
What you are going to want to do is restart the LG washer.
This can be done by unplugging the washer and then letting it sit for a few minutes. The longer you wait, the better it is.
You will want it to completely reset after it restarts.

4. Re-test the Washer
When you are done with this step, you are now going to take the time to re-test the LG washer to see if it is doing the same thing as it was before.
This is going to take a bit of time.
If you are still unsure about going through a wash cycle, you are going to want to keep it simple. This includes running an empty load.
This will let you test the LG washer to see if it is working or if something else needs to be done about it.
This is good information to have for later.
Final Thoughts
These steps will work if the LG washer turns on by itself.
If the LG washer turns on by itself, the most likely cause is going to be a malfunctioning or moist-ridden network button. To fix the issue, replace the network button. It could also be the LG washer needing a reset. To do this, unplug the machine, let it sit for a few minutes, and then plug it back in.
You are going to want to run an empty load with the washer to see if it does the same thing again.
It should not and that is going to let you know the LG washer will be back to how it should be.
This is going to take a bit of time to figure out but you should start with the network button as it is often the root cause of these problems.
Here’s More On The Washing Machine: