Why Your Light Bulb Blew Out Of Socket (Fixed) -

Light bulbs are not supposed to cause issues once set up, but that doesn’t mean you won’t have situations arise that are problematic.

This includes a light bulb that explodes randomly.

In situations such as these, you will want to dig deeper and figure out why your light bulb blew out of the socket.

If a light bulb blew out of the socket, it is likely due to a loose connection causing the base to melt. This creates excessive pressure near the base, which results in the bulb exploding. To fix the issue, tighten the connectors, change the bulb, and re-test the socket.

A light bulb should not explode and this is a safety hazard you need to take seriously.

Until you fix the socket, do not attempt to change the light bulb. It is important to turn off the power to the socket, fix the connectors, and then set up a new bulb.

This is the only way to stay safe and ensure you don’t expose yourself to more risk.

This guide will go into further detail when it comes to dealing with a light bulb that blew out of the socket.

Table of Contents

Best Light Bulbs (EDITOR’S CHOICE)

No products found.

How To Fix Light Bulb That Blew Out Of The Socket

1. Stop The Power Supply

If a light bulb exploded when off, it’s time to cut the power to the socket immediately.

This is a serious safety hazard and not something to take lightly. You could end up in a situation where a fire breaks out because something sparked and triggered a reaction within the socket.

To avoid a bigger repair job, it’s best to turn off the power supply to better inspect what’s going on with the socket and/or light bulb.

This is a must and it’s a safety precaution you need to take. Being proactive during this step is a must to get started on fixing the issue with your exploding light bulb.

2. Remove The Bulb And Socket

If an LED light bulb exploded in the socket, you will want to remove the remaining parts of the bulb.

After the bulb is removed, look at the connecting point, and then remove the socket.

This will allow you to see what’s going on inside. It is likely the pressure inside the socket that is creating issues and that is the type of pressure you need to release as soon as you can.

3. Inspect And Tighten The Connectors

Once the socket is off, it’s time to inspect the connectors.

There are specific connectors that link the socket to the circuit. You will want to check all of them and make sure they are not frayed, damaged, or loose.

If they are loose, you can easily tighten the connectors and put the socket back on.

If they are damaged, you will need to change the connectors before re-installing the socket.

Be detailed during this process and don’t settle for less. You don’t want to have to deal with an exploding light bulb because the connector is loose again. Fix it right the first time around.

This is important and it will provide peace of mind.

4. Re-Test The Socket

You will now want to re-test the socket to see whether or not it’s functioning the way you want it to.

How will you know if there is pressure in the socket?

The best strategy is to listen for specific noises and/or flickering. You will want to see if the light bulb holds its strength and provides enough illumination as it is supposed to when 100% functional.

If there are still issues such as unwanted noises or flickering, this means the connection is still inefficient.

You will need to take a step back and see what can be done to fix the connector. This can include changing additional components linking the socket to the circuit.

What To Do If A Light Bulb Breaks In The Socket?

If a light bulb breaks in the socket, turn off the power supply, remove the broken pieces, insert pliers into the broken piece, and turn it counter-clockwise. This will loosen the broken bulb allowing you to pull it out with the pliers.

Final Thoughts

These are the most important steps to ensure you fix the issue if your light blub blew out of the socket.

If a light bulb blew out of the socket, it is likely due to a loose or damaged connector. To fix the issue, turn off the power supply, remove the damaged light bulb, take out the socket, and tighten or replace the connectors.

This is the only way to ensure the light bulb and socket work the way they are designed to.

Read More On Lights: