The shower stall is supposed to be comprehensively sealed.
This is the only way you can make sure water does not leak everywhere causing significant damage to the surrounding elements.
Unfortunately, it is not always possible for this to happen. There can be times when you have a shower stall leaking in the corner.
If a shower stall is leaking in the corner, start by finding the spot where water is going through, apply silicone caulk over the gap, wait for it to dry, and then re-test the water in the tub.
For the most part, good silicone caulk will get the job done when you are aiming to stop a shower stall from leaking in the corner.
This is a common problem that does arise with older shower stalls.
This article is going to break down the steps necessary to fix a shower stall that is leaking in the corner and what to use during the process.
Table of Contents
Best Silicone Caulk For Shower Stall (EDITOR’S CHOICE)
No products found.
Steps To Fix Shower Stall Leaking In Corner
1. Find The Source Of The Leak
If the shower stall is leaking, you will want to find the source of the leak.
Most people will have to inspect the stall from the inside and outside. This will begin to showcase where the water is going and coming out from.
You need to have a good read on this to fix the leak.
If not, the water might still come through if you end up applying silicone caulk to the wrong spot on the shower stall.
Take your time inspecting the shower stall and finding where the leak is.
As soon as you have done this, you will want to pinpoint whether or not there is a secondary leak. It is common for a secondary crack to appear as the first one opens up.
Fixing both of them at the same time is the right way to go and will save you a lot of effort later.
2. Use Silicone Caulk To Fill The Gap
Now, you are going to begin working on the repair process.
To do this the right way, you will want to use silicone caulk to fill the gap. This will ensure the results are in line with what you want.
The right type of silicone cauis is waterproof. This is going to have to hold properly and fill the gap the way you want it to.
Once you have applied the silicone caulk make sure to spread it evenly with your fingers. This will ensure it settles nicely and does not look bumpy.
3. Wait For The Caulk To Dry
You will want to wait for the silicone caulk to dry after it has been applied to fill the gap.
This is going to take at least 24 hours.
in some cases, it can take longer and it is best to err on the side of caution when it comes to a situation such as this.
You don’t want to turn on the faucet and then realize water is still leaking through!
Stay patient and let the drying process complete. It will ensure the gap is taken care of and the shower stall does not leak in the future.
4. Test The Shower Stall
The final step is going to involve testing the shower stall and the silicone caulk that has dried in place.
To test the fixture, you will want to turn on the faucet.
Let a small stream of water pour out and see if the silicone caulk holds up. If it has been done well, it is going to do a great job of creating a strong seal.
You can continue to run a series of tests including turning the faucet on to 100%. This will let you see whether or not the seal holds up.
If it does, you are good to go.
This is what you have to do when the shower stall is leaking from the corner.
When a shower stall is leaking from the corner, it’s time to find the source of the leak, apply silicone caulk to fill the gap, wait at least 24 hours, and then re-test the faucet to see if it causes the stall to leak.
For most people, this process is going to take a few minutes to complete after the inspection is done.
The most important task is to find the right silicone caulk. Go for a waterproof silicone caulk that is made for a job such as this one.
You don’t want it to crack up or look bumpy.
Take your time applying it and make sure you do things the right way for maximum results.
Read More On Bathroom: