When a washing machine is turned on, it’s supposed to work without flaw.
In most cases, this is going to happen and the washing machine will go through its cycle to wash the clothes as required.
Howevble the washing machine might start leaking from the bottom. This can be a frustrating sight as you are going to be concerned about water damage in the surrounding area.
With this in mind, you need to ask, why is the washing machine leaking from the bottom during the spin cycle?
The washing machine is leaking from the bottom during the spin cycle because the drain hose is loose or one of the seals has come undone. To fix the issue, unplug the washing machine, inspect the drain hose, and inspect the outer and inner seals (pump). Replace the part that’s damaged.
In some situations, you might have put excessive detergent in the washing machine. This can also cause leaks to occur.
You will want to take a look at this to see if this might be the issue. However, your first aim should be to look at the drain hose and the seals.
This guide will take a look at what you should do to fix a washing machine leaking from the bottom during the spin cycle.
Best Cleaner For Washing Machine (EDITOR’S CHOICE)
No products found.
How To Fix Washing Machine Leaking From Bottom During Spin Cycle
1. Unplug The Washing Machine
When a washing machine is leaking from the bottom, you will want to turn off the appliance as soon as possible.
When water continues to pour into the appliance, it is only going to make the situation worse. This is why being fast to act is key.
You will want to not only ensure the washing machine is turned off but that it is also unplugged from the electrical source.
This is the only way to make sure it stops what it is doing as there will be no power running to the washing machine.
2. Inspect The Drain Hose
Now, it is time to take a look at the drain hose in the washing machine.
The drain hose can start to leak as this is where the water is going to go once it exits the washing machine.
If the drain hose is compromised (i.e. has a hole in it), this could cause water to start dripping into the bottom of the washing machine without exiting.
If you take the time to look at the washing machine’s drain hose and realize it has a hole in it then this is the root cause of the problem.
You will want to replace the drain hose to fix it.
3. Inspect The Outer And Inner Seals
If the drain hose is fine, it is time to look at the secondary issue a washing machine might face in a situation such as this.
If the washing machine is leaking during the spin cycle, it might be caused by one of the seals not being tight.
This could be the inner seal near the pump or the outer seal.
You will want to check both.
Look at where the water goes along the bottom and where it is leaking from. This is often a good indicator of whether or not the seal is damaged.
If it is, this will need to be replaced.
4. Replace The Damaged Part
The last step is to replace the damaged part.
If both the drain hose and seals are in good shape, the only other cause would be too much detergent in the washing machine.
This can cause the washing machine to start malfunctioning.
You could have a situation where the water begins to leak from the bottom of a washing machine. If this is the case, clear out the washing machine and make sure to use less detergent moving forward.
You will always want to look at the entire bottom of the washing machine before using it again.
If there is a hole, it needs to be fixed before using the washing machine.
Final Thoughts
Why is the washing machine leaking from the bottom during the spin cycle?
If the washing machine is leaking from the bottom during the spin cycle, it’s likely due to a damaged drain hose or seal. To fix the issue, unplug the appliance, inspect the drain hose, and then inspect both the inner and outer seals. Replace the damaged part.
You should always look to inspect the bottom of the dishwasher to see where the water is leaking from.
This is a good way to know what the issue might be.
If it is close to the drain hose, this is likely the reason. The same goes for one of the seals being damaged.
Here’s More On The Washing Machine: