It is not easy to be in a situation where the washing machine is not running at the speed you want it to.
This can cause the wash cycle to become ineffective and that is the last thing you are going to want when it comes to the overall setup.
It’s best to get a better read on what is going on by being patient. This includes figuring out what is causing the washing machine to spin slowly and keep the clothes wet.
If the washing machine spins slowly and the clothes are wet, it’s best to start by inspecting the agitator. It might be loose and it is not agitating the clothes enough. To fix the issue, unscrew the agitator cap, remove it, and then tighten the agitator to the base.
in some cases, you might be dealing with an issue involving the motor. This is often a sign there is something wrong with the motor and it is about to die.
If you do notice this, you are also going to want to be on the lookout for a burning odor that is going to spread throughout the area.
This is a sign the motor is about to go and it has to be repaired or replaced.
Here is a look at what you want to do if the washing machine spins slowly and the clothes are wet.
Table of Contents
Best Washing Machine Door Prop (EDITOR’S CHOICE)
No products found.
Steps To Follow If The Washing Machine Spins Slow And Clothes Are Wet
1. Close The Power Supply
The power supply has to be your first point of focus with an appliance such as this one.
Since you are going to be checking one of the key components inside the appliance, it’s best to make sure the washer is off.
To do this, you are going to want to pull the plug.
This is going to ensure nothing is connected to the main electrical circuit and you can open the washing machine without getting hurt.
It is best to do this right away and you will also want to look at pulling the washing machine forward while working on it.
2. Check The Agitator In The Drum
The goal here is to check the agitator in the washing machine drum.
What is this part?
It is the screw-like part in the middle of the washing machine drum, which is used to toss and turn the clothes inside.
This is where you are going to get the “spinning” effect.
In general, this can become loose and that is when you are going to want to figure out what is going on with it. The same applies in the opposite direction where it becomes rigid and has to be loosened.
3. Unscrew The Agitator Cap And Pull The Agitator Out
To tighten the agitator, you are going to want to unscrew the agitator cap on top. This will spin off.
Once done, this is going to loosen the agitator enough to take it out with its base.
This is important as you are going to want to take out the agitator and then begin looking at how it is sitting inside the base.
4. Tighten The Agitator To Its Base
If you feel like the agitator is too loose, this is a sign the agitator is not going to spin the way you want it to.
As a result, the best option is to tighten the agitator by looking for the screw holding it in the base.
The base should have come out with the agitator when you took it out of the washing machine drum. They are interconnected.
With this in mind, tighten the part and then put it back into place.
You are now going to have a washing machine that spins the right way and at the right speed.
Final Thoughts
Look into these steps as you figure out why the washing machine spins slowly and keeps the clothes wet.
If the washing machine spins slowly and keeps the clothes wet, it’s time to look at the agitator in the washing machine drum. To fix the issue, shut off the power, unscrew the agitator cap, pull out the agitator, and then tighten it to the base.
This is an important step because it can also go in the opposite direction.
What does this mean?
In essence, the agitator might be too tight in the base. You will want to loosen it a bit if that is the case.
This will help make the agitator work the way you want it to.
It is best to go through these steps while figuring out what your options are.
Here’s More On The Washing Machine: