When a washer starts acting up, you are going to want to investigate for damage and/or other related issues.
One thing people report has to do with the washer’s spin cycle. It might seem like something is off when you get closer to the washer.
It is common for a person to state their Whirlpool washer spins too fast.
If the Whirlpool washer spins too fast, this is likely due to the tub seal being loose. This causes the tub to make aggressive noises, which can be seen as the spinning being too fast. To fix the issue, unplug the washer, inspect the tub seal, replace it, and then restart the washer.
It is also important to note that if the tub seal is in good shape, the main issue might have to do with the load inside the washer.
Sometimes, the load has items that “rattle,” which can make it seem like the washer is spinning too fast when it is just the item whirring around inside.
This is why it is best to run an empty load to test the Whirlpool washer if you feel like something is off or it’s spinning quickly.
Here is what you are going to want to do if the Whirlpool washer spins too fast.
Table of Contents
Best Washing Machine Door Prop (EDITOR’S CHOICE)
No products found.
Steps To Follow If The Whirlpool Washer Spins Too Fast
1. Turn Off The Power Supply
You will want to begin by looking at the power going into the washer.
The goal is to make sure the washer is not running at the time you begin to inspect it. This is dangerous and it is the last thing you will want to deal with while looking at the different components inside the Whirlpool washer.
Since you are going to be looking at key components such as the tub seal, it is best to get on top of this as soon as possible.
This is important if the Whirlpool washer spins quickly.
2. Inspect The Tub Seal
When you have unplugged the Whirlpool washer, it’s time to start inspecting the tub seal to see what is wrong with it.
The purpose is to see whether or not the tub seal is too loose.
Over time, it is going to start to wear down and that is when people report leaking. You will want to get on top of this to make sure water does not get out and you don’t have a washing machine that spins too much.
To get started, just look at the tub seal to see what is happening.
Is it damaged?
Is it loose?
These are signs that you will need to repair the tub seal or replace it with a new one as soon as you can.
3. Tighten Or Replace The Tub Seal
The goal here is to make sure you are tightening the tub seal if it is too loose.
It is possible you might have to replace the tub seal.
If you have the chance to do so, this is a good time to replace it. This is a good part to replace as it will begin to wear down as time goes on.
Just fix it right now and you are going to be good to go for a while.
4. Restart The Washing Machine
The last step will be to restart the Whirlpool washing machine.
The purpose of doing this is to make sure power is going into the washing machine and you get to test it.
If you are still unsure about the washing machine, it is best to start with an empty load. This is going to make sure nothing gets damaged inside the washer and you get a read on how it is doing.
This also includes learning more about the tub seal and how it is working once it has been replaced/repaired.
Final Thoughts
This is a good guide to follow if you are dealing with a Whirlpool washer that spins too fast.
If the Whirlpool washer spins too fast, start by unplugging the washer. Next, inspect the tub seal inside the washer, replace it if it is damaged, and then restart the washer to see how it runs on an empty load.
This is how you are going to get a good look at the washer to see whether or not it makes aggressive noises and/or spins too fast.
Collecting this information is a must as it will make it easier for you to know what to look out for in the future.
Be responsive and proactive with these things and you will have a washer that lasts a long time.
Here’s More On The Washing Machine: