Toilets are supposed to function without making excessive noises and/or not draining the right way.
This includes toilets that are interlinked with a septic system.
While the average toilet is going to be fine, it’s important to ask questions when the toilet gurgles. This includes asking, why is my toilet gurgling on a septic system?
If a toilet is gurgling on a septic system, the most likely reason is clogging in the drain or septic tank. To fix this issue, use a drain snake to see if the clog is in the toilet. If not inspect the plumbing, look for damage, and repair it. The last solution is to call a specialist to drain the septic tank.
It is possible the septic tank is overflowing with sewage and this is an emergency that has to be taken care of as soon as possible.
You will want to speak to a specialist to make sure this is done the right way. They will pump the sewage out of the septic tank.
Here is a look at what you need to do when a toilet is gurgling on a septic system.
Table of Contents
Best Toilet Paper (EDITOR’S CHOICE)
No products found.
How To Fix A Toilet Gurgling On A Septic System
1. Use Drain Snake To Unclog The Toilet
When learning how to get rid of a gurgling toilet on a septic system, it’s important to figure out where the noise is coming from.
While the toilet may be gurgling, it’s not always the source of the problem.
You might have an overflowing septic tank which is the main issue. However, before getting a specialist to drain the septic tank, you will want to look for a DIY solution.
This solution is going to come in the form of unclogging the toilet. In some cases, the clog is closer to the toilet, so you can get rid of it on your own.
To do this, you are going to use a drain snake to push deeper into the drain.
This will loosen the clog and push the wastewater down into the septic tank.
2. Inspect The Plumbing
You will always want to take the time to see whether or not the issue has to do with damaged plumbing.
This can include the pipes that are running to the septic tank.
You will want to inspect everything as there might be a specific reason for the clogging. If it is closer to the toilet then it’s possible for a DIY solution to work.
If not, you are going to be left with having to call a specialist to do the job.
3. Check For Damage
The damage that can occur is often based on how much clogging has taken place inside the pipe.
This can cause the pipe to get clogged to the point of needing to get replaced. This will depend on the situation at hand.
Your goal is to find the place where the clog is.
This can often be determined by the noise that is coming. If it is closer to the toilet then the damage is likely closer to the fixture too.
Follow the noise and you are going to see things work out as you want them to.
4. Drain The Septic Tank By Hiring Specialist
You will want to leave this option to the last minute.
This is going to be pricey and it is going to be your only choice after the DIY solution does not work as intended.
With this setup, you are going to want to drain the septic tank.
A specialist will have the equipment to pump the sewage out of the septic tank and they will do it safely.
Consult with a specialist to see what your options are and then begin getting rid of the sewage that is in the septic tank. This is the only way the toilet gurgling will stop.
Why is my toilet gurgling on a septic system?
If a toilet is gurgling on a septic system, the most common reason is clogging in the toilet or a full septic tank. To fix the issue, start by using a drain snake to see if the clog is in the toilet drain. Next, check the pipe running from the toilet, look for damage, and see if it can be fixed. If not, consult with a specialist to pump sewage out of the septic tank.
This is the only way you are going to get rid of the toilet gurgling that is happening in the bathroom.
For the most part, you do want to be quick with the solution. It is the only way to make sure surrounding components don’t get damaged along the way.
Read More On Bathrooms: