When an oven is in a bad shape, it’s important to get to the bottom of things as soon as you can.
Otherwise, the oven’s performance is going to diminish and that brings along with it a list of problems you will not want to deal with.
One condition people state is common would be when the bottom of the oven is warped.
If the bottom of the oven is warped, this means heat is getting trapped near the bottom element causing the metal to warp. To fix this issue, remove any aluminum foil, clean the surface, and use a liner mat to protect the surface. A long-term solution is to replace the bottom of the oven.
For most people, it’s too expensive to change the bottom of an oven, so it’s best to use a silicone liner mat for the purpose.
It will offer a short-term protective option that is going to allow you to use the oven even if it is warped. Of course, if the damage is extensive then you will have no other option than to replace the bottom of the oven.
This article will shed a few tips and tricks on what to do if the bottom of an oven is warped.
Best Silicone Liner For Oven (EDITOR’S CHOICE)
No products found.
Steps For Managing Bottom Of Oven That’s Warped
1. Remove The Aluminum Foil
If the bottom panel of an oven is warped, this means you were using a material that did not work well with the heat.
This happens when people aim to use aluminum foil inside an oven. They place it on the bottom, which causes excess heat to get trapped when it should be moving freely.
To avoid a situation such as this, you will want to begin by removing the root cause of the problem.
This would be anything that is blocking the heat from moving.
In most cases, the situation is going to entail removing aluminum foil from the bottom of the oven.
2. Clean The Surface
Next, you are going to begin to clean the surface.
The surface has to be clean to make sure you are not leaving debris behind or anything else that might trap heat.
In older ovens, this is a real concern and something you are going to want to think about in greater detail.
You can use any type of oven cleaner for this process and it will work out as you want it to. Be thorough while cleaning the bottom of an oven and make sure to wipe it dry before moving to the next step.
3. Install A Silicone Liner
Now it is time to think about what you are going to use to protect the bottom of an oven that is warped.
In some cases, you will have to replace the bottom of the oven and that is common with older appliances that have faced a tremendous amount of damage.
On the other hand, you will also have situations where there is only a little bit of warping.
If it’s a little bit of warping, you can set up a silicone liner on the bottom of the oven. This will help protect it.
4. Replace The Bottom Of The Oven (If Necessary)
This is a step that is not always mandatory.
It is only recommended for those who know the silicone liner is not enough. You will want to take the time to replace the bottom of the oven and figure out what’s going on with it.
This is how you are going to get the results that you want.
Always replace the bottom of the oven if the warping is aggressive and will not allow the oven to work as it is designed to.
It will be costly and you will need to think about alternatives including buying a new appliance. This comes down to your budget and what you believe is right for the oven.
Final Thoughts
These are the main steps to think about if the bottom of an oven is warped.
If the bottom of an oven is warped, start by removing the aluminum foil, clean the surface using an oven cleaner, set up a silicone liner, and then use the oven. If the damage is excessive, you will need to replace the bottom of the oven.
This is a judgment call and it comes down to what you believe is the right way forward.
The warping will often determine which direction you choose to go in. If it is excessive, you will not have any other choice.
Think about this and make sure you are trending in the right direction with the approach you take.
Read More On Kitchens: