When it is time to change the aesthetics of grout in a specific area, it’s important to understand what your options are.
Without knowing this, you cannot plan on how to change the grout’s color appropriately.
One question you are going to have is, can you grout over grout to change color?
Yes, you can grout over grout to change colors. To do this, the grout needs to be cleaned and then new grout can be applied to help change the color.
The existing grout is likely tarnished due to natural discoloration and/or water damage. This does happen as time goes on and that is why taking the time to apply new grout is never a bad idea.
It’s a great way to freshen the grout and make it look the way you want it to.
Here is a look at what you need to do when applying grout over grout to change colors.
Table of Contents
Best Grout Haze Remover (EDITOR’S CHOICE)
No products found.
Steps To Grout Over Grout To Change Color
1. Wipe The Grout Using A Clean Cloth
When figuring out how to color grout, you have to understand the reasons for the grout’s color changing in the first place.
Until you do this, you are not going to find a solution that works.
In general, the main issue that causes the grout to lose its original color has to do with natural wear and tear. This tends to happen a lot and it is something you will notice over time.
As a result, you will want to look at cleaning the grout before moving forward with the application of new grout.
To do this, you will want to use a clean cloth and begin scrubbing the grout.
You can also use a grout cleaner during this process to work on any stains and/or spills found on the grout.
This will depend on what is in front of you and it is a judgment call.
2. Apply New Grout In One Spot As A Test
You will want to take the time to apply new grout at this stage after the cleaning is done.
How are you going to do this?
The premise is to take the new grout in your possession and work in a small spot. Just choose a few inches of the grout to work on. It can be in the corner if that is useful to you for the test run.
The goal here is to see how the grout responds to the old grout.
You will want to make sure it is applied evenly and you spread it with your finger so it rests smoothly.
3. Continue Working In Small Spots
When you have applied it to one spot and let it dry, you are now going to see how the grout’s color has changed.
This is good information as it was a part of the experiment you have just run.
With this information in mind, you can then look to work on the rest of the grout. You will still want to work in small spots to apply the grout evenly.
Do not rush this process and make sure the grout sits evenly. This is a must.
Otherwise, it will look out of order and odd.
4. Let The New Grout Settle
You will want to make sure to let the new grout settle.
A lot of people don’t do this because they are eager to start using the fixtures around the grout as soon as possible.
While it might be enticing to do this, it is not the right approach to take.
You are going to end up in a situation where the grout becomes too porous for it to do its job. This is the last thing you are going to want as a property owner.
Look to let it dry for as long as it needs to.
Can you grout over the grout to change color?
You can grout over the grout to change color. Before doing this, clean the grout using a commercial-grade grout cleaner and a clean cloth. Once done, apply the new grout in a small spot as a test run to see how it works. Now, do the rest of the grout.
This is going to ensure the color changes as you want it to and it looks appropriate from different angles.
You will always want to make sure the grout is set evenly as that is the only way it is not going to lead to unwanted damage in the future.
The more time you spend on this right now, the fewer worries you are going to have in the coming months or years.
Read More On Bathrooms: