The drain bladder is a wonderful tool and is often used for cleaning a pipe, but it’s important to make sure it is kept in good condition.
This includes understanding how to use it in the pipe.
If you are not careful, it’s possible for the drain bladder to break down. This is when you have to figure out why the drain bladder broke off in the pipe.
The drain bladder broke off in the pipe because it got wedged inside. To fix the issue, reduce the pressure, twist the hose clockwise, and pull upwards slowly. This will allow the drain bladder to untangle and come out.
You have to realize that this is going to take a bit of time to do. When the drain bladder gets stuck in the pipe, it is not easy to take out and it starts to add up as time goes on.
You will want to be patient and make sure you are not applying too much pressure to the drain bladder as it will get worse with time.
This article is going to take a look at what you need to do when the drain bladder broke off in the pipe.
Best Grout For Shower Drain (EDITOR’S CHOICE)
- Premixed ready to apply
- Stain resistant
- Crack and shrink resistant
Last update on 2023-01-27 / Affiliate links / Images from Amazon Product Advertising API
How To Remove Drain Bladder That Broke Off In The Pipe
1. Reduce The Pressure
A stuck drain bladder is not a sight you want to see.
However, it is common for this to happen depending on the layout of the pipe and where the clog is.
This is why you are going to want to be patient when inserting the drain bladder as that is how you are going to get rid of the clog without damaging anything.
With this in mind, if the drain bladder is stuck, you are going to want to start by reducing the pressure in the pipe.
This is going to be done by reducing the pressure behind the drain bladder. As soon as you do this, you are going to notice the drain bladder will loosen. This is a common reaction due to the dropping of pressure.
2. Twist The Hose Clockwise
When the pressure is down, it is now time to twist the hose clockwise.
The reason for doing this is to make sure it is turned to one side as that is going to cause it to loosen a bit.
If you keep the hose straight-on, this is going to wedge it deeper into the pipe.
The same goes for those who attempt to move it back and forth. This is not a good idea.
You will want to only twist it to one side and see how things play out.
3. Feel The Pressure Of The Bladder
After the hose has been twisted clockwise, you are now going to want to pay attention to the pressure of the drain bladder.
It should feel loose.
If it does not, you are going to want to keep twisting in that specific direction until it does. The same goes for the amount of pressure behind the drain bladder.
Both need to be managed with care.
4. Gently Pull Upwards
The last step is going to be the most important and you have to be careful while doing this to ensure the pipe does not get damaged.
The drain bladder will need to be pulled out.
You are going to do this by gently pulling upwards. This is going to take a bit of time to do.
If the drain bladder has completely broken off inside, you are going to need to use the pressure to push it out in the opposite direction. There is no other way of getting it out.
This is why you will want to start by making sure you can gently pull it up by twisting it to one side.
These are the tips that matter when the drain bladder broke off in the pipe.
If the drain bladder broke off in the pipe, it’s best to decrease the pressure in the pipe, twist the hose clockwise, and gently pull it upwards. If it is completely broken off, it’s best to decrease the pressure and have it pushed out the other end.
For the most part, you will want to hope it is still somewhat connected to the hose.
This is how you are going to get it to come out as long as you are gentle.
Sometimes, you might think it is completely off when that is not the case. Just continue to twist the hose and it will come out as soon as you begin to pull upwards.
Read More On Bathrooms: