It’s never ideal dealing with a malfunctioning washing machine but it can get worse when the seal breaks or gets affected.
This creates a situation where you are going to have to get to the bottom of replacing the washing machine seal or figuring out what is going on with it.
A common issue people report is when there is black mould in the washing machine seal.
If there is black mould in the washing machine seal, start by mixing 50% water with 50% vinegar in a bowl. Next, apply this mixture onto the seal, wait a few minutes, and then scrub until the mould is gone. Rinse the area when you are done.
This is going to help get rid of the black mould on the washing machine seal and ensure it looks the way you want it to.
This article is going to shed light on what to think about when it comes to removing black mould in a washing machine seal.
Best Washing Machine Cleaner (EDITOR’S CHOICE)
No products found.
How To Remove Black Mould In A Washing Machine Seal
1. Mix Water And Vinegar
When figuring out how to clean the rubber seal in a washing machine, you are going to need a potent cleaning solution.
This is a solution that will last a long time and is going to be well-rounded enough to get rid of the mould instantly.
To do this, you are going to need vinegar.
The perfect mixture has to be set at the right ratio. This means 50% water mixed with 50% vinegar.
When you add these ingredients into the mixing bowl, you have to ensure the mixture is perfect. This includes taking the time to mix the ingredients thoroughly.
2. Apply Onto The Washing Machine Seal
When the cleaning agent is ready, you are now going to have to use it directly on the washing machine seal.
Access the washing machine seal by turning off the water supply and unplugging the appliance.
You will want to ensure you have complete access to the seal while doing this. Be patient when accessing it and make sure you get to where it is right away.
When you do this, you are now going to take the cleaning solution and apply it to the seal carefully. This is how you are going to get the results you want and it will turn out as you are hoping for it to.
During this process, you will want to wait at least a few minutes for the solution to settle. This is how it is going to loosen the black mould on the washer seal.
3. Scrub Using A Cloth
When you have waited a few minutes, it is time to start scrubbing the surface using a clean cloth.
You will want to make sure to target the mould while doing this.
It will take a bit of time depending on how severe the black mould is. There is nothing wrong with being patient and you will want to continue to scrub until you are certain the washing machine seal is the way it needs to be.
4. Rinse With Water
You will want to rinse the water while you are doing this.
It’s important to make sure you are rinsing the washing machine seal carefully. This includes using clean water and getting the entirety of the seal during the process.
The reason for doing this is to make sure you don’t have vinegar drying on the seal for too long. This might not work out well for the seal and it is something you want to avoid. Plus, you don’t want to have leftover black mould settling on the washing machine seal.
Get it right the first time by making sure you are rinsing it thoroughly.
Final Thoughts
These are the steps to think about as you are learning how to remove black mould in the washing machine seal.
To remove black mould in the washing machine seal, start by mixing 50% vinegar with 50% water in a mixing bowl. When ready, apply this mixture onto the seal, wait a few minutes, and then scrub using a clean cloth. Rinse the seal when you are done.
This is going to take a bit of time but it will work out the way you want it to.
The goal has to be to make sure you get rid of the mould on the washing machine seal the first time around. If you feel like there is a little bit left, go through the same steps again and you will be good to go.
Here’s More On The Washing Machine: