When a faucet is not locked into place, it can become a headache to deal with.
This can lead to situations where you have to manage leaks, reduced water flow, and a long list of additional issues because the faucet is not working properly.
A common issue that occurs is the faucet handle spins all the way around. This means you have no control over the water flow.
To fix a faucet handle spins all the way around, turn off the water supply. Now remove the faucet handle and locking nut underneath. This will reveal the cartridge. Remove it and replace the cartridge with a compatible alternative. Reattach everything and the faucet handle should not swivel as required.
It’s important to note, sometimes the cartridge is fine and the locking nut wears down. You will have to assess whether or not that is the issue before replacing each component inside the faucet.
For the most part, it is the cartridge that is going to be the troublemaker in this scenario.
Here is a step-by-step look at what to do if the faucet handle spins all the way around.
Best Faucet (EDITOR’S CHOICE)
No products found.
How To Fix Faucet Handle That Spins All The Way Around
1. Turn off the Water Supply
If a faucet handle goes beyond the normal stopping point, it’s time to look at what’s going on internally.
A common issue has to do with the cartridge not functioning the way it is designed to. This causes the faucet to not have a reasonable stopping point.
To fix this issue, you are going to begin by turning off the water supply to the faucet. Allow the faucet to drain for a minute by keeping it open.
You want to ensure water does not leak outside as soon as you take off the faucet.
2. Unscrew the Faucet Handle
If the faucet handle is spinning too much, you will have to take it off.
You are going to unscrew the faucet handle to reveal what is inside. Each type of faucet is different when it comes to the locking mechanism, so look for how it is screwed into place.
You will likely find this near the base or underneath the sink. It will depend on the faucet itself.
Your goal is to take off the loose faucet and make sure it’s separated from the sink. This will allow you to take a proper look inside to see what’s going on.
3. Unscrew the Locking Nut
If you want to learn how to fix a spinning tap handle, it’s important to unscrew the locking nut inside.
This part is specifically designed to lock all of the components in place including the faucet handle. In some cases, it is the locking nut that is going to be the troublemaker.
It might have corroded, which means you have to replace it carefully.
You will also want to take the time to remove the locking nut to see the cartridge underneath. This will give you a proper picture of what is the root cause of the spinning faucet handle.
4. Take out and Replace the Cartridge
You are now going to take out and inspect the faucet cartridge.
This will shed light on whether or not it is structurally sound.
Once you take off the faucet cartridge, look at whether or not it is broken down. If it is, you will have to replace the cartridge with an equal alternative. This is mandatory.
You have to ensure it is done the right way to see appropriate results. When it is in place, secure it using the locking nut and make sure it does not wiggle around. This is key if the faucet handle keeps turning all the time.
Final Thoughts
These are important steps to follow if your faucet handle spins all the way around.
If a faucet handle spins all the way around, you will have to check the cartridge. To do this, turn off the water supply, remove the faucet handle, unscrew the locking nut, and inspect the cartridge. If it is damaged, replace the cartridge with a compatible alternative. This should fix the problem.
In most cases, it is the cartridge that is going to be the problem but the locking nut can give you trouble too.
Test both components to see what is causing the faucet handle to spin all over the place. Once you find out, replace that component.
It’s the only way to stop the problem in its tracks.
Read More On Kitchens: