Frigidaire Dishwasher Stuck On Wash Cycle! (Fixed)

When using a Frigidaire dishwasher, you are going to enjoy how refined and robust the performance is.

However, some machines are going to break down on you and not work as they are engineered to.

This leads to a situation where the Frigidaire dishwasher is stuck on the wash cycle.

If the Frigidaire dishwasher is stuck on the wash cycle, this means the thermostat, timer, or float switch has malfunctioned. To fix the issue, inspect each part and check which one is damaged. Replace the part and the wash cycle will continue as it is supposed to.

For most of these issues, you will need to replace the part as they will be difficult to repair. By replacing them with a compatible component, you will make sure the Frigidaire dishwasher continues to work as you want it to.

This article will explain what you need to inspect when the Frigidaire dishwasher is stuck on the wash cycle.

Best Dishwasher Salt (EDITOR’S CHOICE)

No products found.

Steps To Follow If Frigidaire Dishwasher Is Stuck On Wash Cycle

1. Check The Thermostat

When it comes to the temperature inside the dishwasher, it needs to be set at a specific amount for the next cycle to be triggered.

There are built-in mechanisms in place that are required to be triggered for a dishwasher to rush through its cycles as intended.

This is why you might be facing an issue where the Frigidaire dishwasher is stuck on the wash cycle.

The first thing to look at will be the thermostat.

This is responsible for regulating the temperature in the dishwasher. If it doesn’t work, the water will not warm to the point it needs to cause the cycle to become stuck.

In most cases, the thermostat will have burned out and needs to be replaced.

It is still okay to go through and see if you can tighten the thermostat and see if that helps. You can also attempt to reset the thermostat and see if that makes things better.

frigidaire dishwasher stuck on wash cycle

2. Inspect The Float Switch

This is one detail you are not going to think about.

The next cycle is going to be activated based on where the float switch is set. This is going to determine the amount of water that is in the dishwasher.

Since this is the wash cycle, the water has to hit a specific limit.

If it does not, the dishwasher will assume the cycle is still ongoing and will remain stuck.

You will have to see whether or not the float switch in the dishwasher is damaged and then fix it.

It is relatively cheap to replace and that is often the best way to go.

3. Inspect The Timer

The timer is responsible for going through a specific cycle based on the amount of time that has passed.

There is a built-in timer that comes with most dishwashers and this is no different.

As a result, you have to ensure the timer is working.

In some cases, the timer will work, which means it is going to try to cycle at a specific time but the dishwasher won’t do so.

If that is happening then the timer is not the issue. It is likely the float switch and/or thermostat.

frigidaire dishwasher stuck on wash cycle

4. Replace Malfunctioning Part

Now that you have taken a look at all three parts, you will want to replace the one that is causing the Frigidaire dishwasher to be stuck on the wash cycle.

Look at finding a compatible part, so the dishwasher does work as you want it to.

This is a must.

If you don’t replace the malfunctioning part, it is going to break down and the dishwasher will come to a stop.

It is best to get out in front of this while you still can.

The more you dig into this, the better your results are going to be.

Final Thoughts

These are the main steps to think about when it comes to a situation where the Frigidaire dishwasher is stuck on the wash cycle.

If the Frigidaire dishwasher is stuck on the wash cycle, this means the thermostat, timer, or float switch is malfunctioning. To fix the issue, inspect each part, check for damage, restart the dishwasher, and replace the one that is causing the issue.

You will not want to rush this process as this is all about the inspection phase.

You need to dig deeper to figure out what is going on with the parts. This will let you know what to consider and what to ignore.

In most cases, it will be one of these parts that are the troublemaker. Replace it and you will be good to go.

Read More On Kitchens:

  1. What Causes Samsung Dishwasher To Drain Without Washing?
  2. Why Does My Dishwasher Have Two Wires?
  3. Causes For Rusting Inside Dishwasher
  4. How To Operate Dishwasher Normal And Quick Wash
  5. Looking At Dishwasher High Temp Vs Heat Dry
  6. The Best Option To Run A New Dishwasher