Bathtub Jets Won’t Turn On! (Fixed)

When the bathtub jets are on, they are an excellent way to relax and enjoy your time in the tub.

However, this is a feature that does not always work as you want it to. In some cases, you will have a situation where the bathtub jets won’t turn on.

If the bathtub jets won’t turn on, the most likely cause is bad wiring or the main power supply running to the motor. To fix the issue, inspect the wiring, reset the power supply, and clean the jets before re-testing the setup.

With a brand-new installation, this is one of the more common issues that arise.

You will need to be diligent while assessing how the power is running to the bathtub jets and where the issue might reside.

This guide will show you what to look for when the bathtub jets won’t turn on and how to fix the issue.

Best Cleaner For Bathtub Jets (EDITOR’S CHOICE)

No products found.

Steps To Follow If The Bathtub Jets Won’t Turn On

1. Inspect The Wiring

If the bathtub jets don’t work, you will need to figure out how the electrical power is running to the setup.

These are powered, so that has to be the first thing you consider.

When the wiring is off or it is not in the right spot, you are going to have real issues to contend with including how the wiring is set up.

You will want to take the time to figure out where the wiring is running and how it is linking back to the bathtub jets. Until you do this, you will know whether or not the wiring itself is damaged or loose.

Look at the wiring at the connection points.

This is commonly where the issues start.

If the wiring is loose then make sure to tighten it and ensure it does not budge. If it is damaged then you will have to replace the wiring as soon as possible or the bathtub jets won’t turn on.

bathtub jets won't turn on

2. Reset The Power Supply

Let’s assume the wiring is in good shape.

Next, you are going to want to consider resetting the power supply. This is a common problem when you have just installed the bathtub and everything has not been tested properly.

The power supply might need to be restarted.

You can do this at the circuit breaker or where the motor is. Look to unplug the unit and try to use it again.

For the most part, resetting the power supply is a great way to get the bathtub jets to start.

3. Clean The Bathtub Jets

This is a step that is not going to be on the top of your mind but it can make a difference as long as you are diligent.

The purpose of cleaning the bathtub jets is to make sure any excess debris is removed as soon as possible.

This is a possible issue that can occur with older bathtub jets.

You will want to clean the debris and see if that is the issue. The motor might be working but the bathtub jets might be clogged to the point they will not function at all.

Look into this to see what the core issue is and make it a habit to clean the bathtub jets even when they are working.

bathtub jets won't turn on

4. Re-Test The Bathtub Jets

You will want to re-test the bathtub jets.

The purpose is to see whether or not the bathtub jets are starting now. If they are not then the most likely issue has to do with the main motor.

You might have a dud that needs to be replaced or repaired.

For the most part, the steps that have been cited here are going to get the job done and you will see the type of results that will work out as you want.

Final Thoughts

It is these steps that are going to ensure you learn how to fix bathtub jets that won’t turn on.

If the bathtub jets won’t turn on, the main cause has to do with the power supply or the core wiring. It might be damaged or loose. To fix the issue, inspect the wiring, tighten it, and then reset the power supply.

This will make sure the bathtub jets start as you want them to.

It is important to go through these steps to see what the main issue is. The wiring or the motor might be the root cause of your troubles with the bathtub jets.

The more you look into this, the more you are going to learn about the setup and what needs to happen.

Read More On Bathrooms:

  1. Best Number Of Caulk Tubes For Bathtub
  2. Steps For Cleaning Bathtub Jets
  3. Why Your Bathtub Jets Won’t Shut Off
  4. Easy Ways To Cut Out Grey Stains In The Bathtub
  5. Easy Ways To Set Up A Tub Spout
  6. Why Is The Tub Lip Misaligned?