When you are setting up the fixtures in a shower, it’s important to dissect the finer details right away.
An oversight that’s usually seen when it comes to these fixtures would be the placement of the shower valve.
You will want to ensure it’s set in the right spot.
This includes figuring out how far should a shower valve stick out from the wall.
A shower valve should not stick out too much from the wall. It’s recommended for the base of a shower valve to sit flush against the wall. In general, a shower valve can stick out 3-4 inches from the wall.
If it sticks out too much, this can look odd and take away from the shower’s aesthetic. There is a fine line to toe when it comes to something like this.
Be careful, measure everything, and always ensure the shower valve’s base sits flush against the wall. If it sticks out, the valve will become unstable and this can also cause leaking.
This article will explain more on how far a shower valve should stick out from the wall.
Best Showerhead (EDITOR’S CHOICE)
No products found.
Tips For How Far A Shower Valve Should Stick Out From Wall
1. Base Should Sit Flush Against Wall
If a shower valve sticks out too far, it will look awful.
This is why you will have to determine where the issue lies. To the surprise of many people, it is not the tip of the shower valve that’s a concern. Instead, the main issue lies with the base.
If the base of the shower valve is not flush against the wall, it will look odd. You will notice it sticking out.
In some cases, the shower valve is also going to become unstable when you use it.
This is not good and it can also lead to leaks.
This is why the best option is to take a step back and ensure the shower valve’s base is sitting against the wall.
2. The Valve’s Tip Should Be 3-4″ Off The Wall
Once you are sure about the base, it’s time to look at the rest of the shower valve.
You don’t want the shower valve too deep in the wall, but it’s also important for it to be easy to turn.
Otherwise, it will become rigid and difficult to use.
The general rule of thumb is to have a shower valve that sticks out approximately 3-4″ from the wall.
3. Don’t Forget The Valve’s Height
You also should note down the height.
A shower valve that is too low will become unusable or inefficient. A person should not have to reach too high or bend too low when it comes to the shower valve.
In some cases, this is also a safety risk.
It should be at a reasonable height for people of different heights. In most cases, this means setting the shower valve at a height of approximately 4 feet.
This is more than enough for people of different heights to reach.
4. Test The Shower Valve Before Finalizing Its Spot
You should always test the shower valve.
This includes ensuring it will work well when put to use. To do this, tighten the shower valve and see how it looks in that spot.
If you just have a rough-in, you will want to place the shower valve against the wall to see if it would work well at the height you have selected.
It can offer great insight into how deep the shower valve should be too. Write down all of this information and then move forward with the installation.
You don’t want to have to take it back down once the work begins as that is a much longer repair job.
It is these details that matter when it comes to figuring out how far a shower valve should stick out from the wall.
When finding out how far a shower valve should stick out from the wall, it’s recommended to set the base of the valve flush against the wall. While the tip of the shower valve should come out approximately 3-4 inches.
Take your time finding the right spot and always keep it around 4 feet off the shower floor. This makes it accessible for people of different heights.
A well-designed and installed shower valve looks the part and doesn’t make it difficult to use. The role of a shower valve is to regulate water, which is why an incorrect installation can ruin everything.
Be meticulous and take measurements during the process.
Read More On Bathrooms:
- How To Go About Plunging Shower Drain
- How To Lengthen Shower Valve Deep In The Wall
- Tips For Dealing With Limescale On Showerhead
- Are Showerheads And Valves Better On Separate Walls?
- Tips For Replacing Shower Valve From The Front
- How To Know Which Shower Valve Manufacturer Made Yours
- How To Go About Cleaning A Showerhead
- What Leads To The Water Not Flowing Through A Showerhead?
- Will Showerhead Be Safe On An Outside Wall?