Soap dispensers are an underrated part of the bathroom.
To wash your hands, it’s common to set up a soap dispenser in the room. Not only do you have to take the time to fill this soap dispenser, but it’s also important to understand how to take it apart when necessary.
A lot of people don’t know how to do this and end up breaking the soap dispenser or ruining the pump.
This is why it’s important to learn how to take apart a soap dispenser pump.
To take apart a soap dispenser pump, start by wiping the excess soap using a dry cloth or tissue. Once dry, twist and pull the middle of the pump counter-clockwise. This will expose the ball bearing. Store this ball bearing and remove the pump as required.
It’s a simple process that can become complicated when the pump gets jammed. Don’t panic when this occurs and simply make adjustments by wiping the soap away and applying more force to the middle of the pump.
This article will provide more clarity with a step-by-step breakdown on how to disassemble a soap dispenser pump safely.
Best Soap Dispenser (EDITOR’S CHOICE)
No products found.
Steps To Disassemble Soap Dispenser Pump
1. Wipe Off The Excess Soap
You will want to start by wiping the excess soap away.
This is a real concern because it will make it difficult to grip the pump. If you can’t grip it, how are you going to turn the component to loosen it?
This is why the first thing a person has to do is find a dry cloth or tissue to wipe away the excess soap. This soap tends to roll down when you are using the soap dispenser and it can leave sticky goo that makes everything slippery.
Be patient during this process and make sure to get all of the soap.
This will ensure you can easily loosen the soap dispenser pump without damaging anything else.
2. Unscrew The Pump
Now it is time to start working on the pump.
The first step is to try unscrewing the pump from the top. This can be done by simply holding it near the top and then twisting counter-clockwise.
If it is a newer soap dispenser pump then this might be all you are going to need. It won’t be as complicated nor are you going to face hurdles during the process.
This is rarely going to be your experience but it is worth a shot.
If it unscrews like this, you are good to go and can begin cleaning the soap dispenser or repairing it as necessary.
If not, you have to move on to the next step.
3. Twist and Pull the Middle of Pump
This step is going to require additional force and you are going to twist the middle of the pump.
This is going to be where the threads are and that is how you are going to get it to spin properly. Apply force by twisting and pulling at the same time.
This will loosen the soap dispenser pump and eventually get it to come off as you want it to. Be patient during this part of the process but do apply enough force to get it to spin.
If necessary, you can use a dry cloth for additional grip when attempting to do this.
4. Keep The Ball Bearing In A Safe Spot
When the soap dispenser pump loosens, you are going to want to keep the ball bearing in a safe spot.
This component will be needed later on when you are putting things back together. If you lose the ball bearing then it will become difficult to put everything back to how it was and you might also end up requiring a soap dispenser pump replacement.
To avoid a scenario such as this, just take the ball bearing off and put it in a safe spot you’ll remember.
Once you have done this, the soap dispenser pump will be off and you can begin working on whatever you want to.
Final Thoughts
These are the main steps on how to take apart a soap dispenser pump.
When taking apart a soap dispenser pump, you have to start by drying the excess soap on the surface. Use a dry rag or cloth to do this. Now, twist and turn the soap dispenser pump by holding it in the middle and turning counter-clockwise. This will loosen the pump and get it to come off.
Take your time during this process and do apply a decent amount of force to get it to loosen.
For most people, it will come off easily.
Read More On Bathrooms: